Question about 2003 Chrysler PT Cruiser

2 Answers

P0522 engine code with oil ligth on 2005 SRT 4

I was driving and both of them pop up at once i check the oil level and its normal not at max but not at min.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,615 Answers

By any chance did this start after an oil service. Could be the wrong oil. But my first guess is the wire at the sensor may be loose or the sensor is bad. Oil pressure sensor. Best bet is to have it looked at by a pro because Chrysler has had lots of problems over the years due to oil issues. I'm talking engine destroying oil issues. I'm not saying be concerned but be aware of this in order to make your best decision

Posted on Jul 15, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chrysler Master
  • 76,164 Answers

This code means the engine oil pressure switch is sending a low eng oil pressure signal, if the engine is not knocking then the problem is most likely just the oil pressure sensor switch is defective, but have it checked ASAP as low engine oil pressure can ruin a $5000.00 SRT 4 engine very fast.

Posted on Jul 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i fix a p0522 code that is read by my engine light? Can i reset it and forget it? Or is it dangerous?


code p 0522 refers to engine oil pressure sensor/switch---low voltage === causes --wiring short to ground ---engine oil pressure sensor/switch---ECM
any reference to oil pressure warnings should be taken seriously as a destroyed engine is a result of inaction
first get it to an accredited service shop that handles your make of vehicle and have the oil pressure checked with a mechanical gauge
if it not a pump/ oil level problem , replace the sensor

Apr 20, 2016 | 2005 Chrysler Pacifica Touring

1 Answer

Is 3 litres of castrol gtx too much for a 2005 tazz/carri 1.3? It's about 5 mm about the max mark on the dipstick.


Normally your engine oil capacity is four liters. at the dip stick ,there is a marking "min" and "max" which indicates the level of oil inside your engine. This marking represents one liter capacity. So when you measure it and the oil level is in between the min and max markings that means you need to add half a liter of oil. As in your case its already too much oil and this could lead to a hotter engine.

Sep 04, 2015 | Cars & Trucks

2 Answers

P0420 p0522 chrysler pacifica CODES


thje po420 need to monitor o2 sensors to verify if you have a bad sensor or bad catalitic converter
the po522 oil presure sending unit

Oct 15, 2014 | 2005 Chrysler Pacifica

1 Answer

2005 PT Cruiser showing P0456 and P0522. Cranks but wont start.


The sensor that is most likely causeing the problem is the low oil pressure sensor. It is telling the cpu that you have a problem that unless you correct it, the motor will suffer serious damage from insufficient lubrication.Have the oil pressure checked with a manual gauge then replace the sensor unit if faulty.

Feb 23, 2013 | 2005 Chrysler PT Cruiser

1 Answer

My 2004 Pacifica wont start at all, the gear is in park but the gears on my dash panel are all lit up, no matter what gear I put it in. I changed the Transmission Solenoid cause their was a hole in it...


What Transmission Solenoid did you replace ? Pressure control solenoid ? Shift control ? P0522 code is not saying oil pressure is low , It's saying the PCM is seeing sensor pressure low ! Do you know how to test automotive electrical circuits with a volt meter ? An this has nothing to do with your gears lit up . Different problem .

Apr 15, 2017 | Chrysler Pacifica Cars & Trucks

1 Answer

I am getting a code p522 and a p340 on my 2006 dodge caravan. i replaced the camposition sensor but i am still getting both codes. anything that i could try. thank you.


CODE P0522 - ENGINE OIL PRESSURE SENSOR RATIONALITY. CODE PO340 - NO CAMSHAFT POSITION SENSOR CIRCUIT FAILURE. REPLACE OIL PRESSURE SENSOR.YOU NEED A CODE SCAN TO ERASE CODES. IF THESE CODES POP UP AGAIN. YOU COULD HAVE PCM PROBLEMS.CMP SENSOR NOT RECEIVING 5 VOLT SUPPLY.

Aug 13, 2011 | 2005 Dodge Caravan

1 Answer

My jeep liberty 2004 3.7 . Is showing these code`s... po300 , p0522 , po335...and I find she`s hard to start....why...


there appears to be a problem with your crank position sensor and your oil pressure switch.
http://www.obd-codes.com/p0300
http://www.obd-codes.com/p0335
  • P0522 Engine Oil Pressure Sensor/Switch Circuit Low Voltage
  • http://www.jeepforum.com/forum/f28/p0522-engine-oil-pressure-sensor-switch-circuit-low-voltage-618006/
  • The crank position sensor or its connection is probably at fault. The engine needs the signal that the crank postion sensor provides to inject fuel and supply spark at the correct time.

    Feb 06, 2011 | 2004 Jeep Liberty

    1 Answer

    Engine lite on two codes p0440 p0522 what are


    p0440-Evaporator Emissions Control Malfunction. P0522- Engine Oil pressure low. Replace the Gas cap and double check your engine oil level to make sure your not low. Reset the computer and see if the codes return. If your oil level is good when you check it you may have a problem with your oil pump.

    Jul 22, 2010 | 2003 Dodge Durango

    1 Answer

    Engine light on faults p 456 p522


    P0456 is Evap Emission control small leak detected.
    P0522 Engine oil pressure sensor low voltage.
    The first code could be related to a loose, defective, or missing gas cap.
    The second code, could be a defective sensor but you will need to confirm. Check oil level and condition first then onto the sensor and related wiring.

    May 13, 2010 | 2006 Dodge Grand Caravan

    Not finding what you are looking for?
    2003 Chrysler PT Cruiser Logo

    1,189 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chrysler Experts

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8273 Answers

    Are you a Chrysler Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...