Question about 1997 Eagle Vision

1 Answer

I want to drain the water from my 97 Eagle Vision Rad so I can fill the resovior with the corect fluid, where is the point of drainage located? Help Please.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 218 Answers

Should be a drain valve located on the bottom of the radiator, if not, you may have to just remove the lower radiator hose. Most radiators have drain valves, but there are a few that don't. Hope this helps

Posted on Jul 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace the coolant in my 96 dodge caravan after i flush the system


Make sure all the drains are closed, start filling the rad and allow the coolant time to drain down, then fill again. Keep filling the rad unit it no longer drains down, just make sure to stop filling it when the level in the rad is just barely visible when looking down inside it. Now fill the overflow bottle to the lowest level mark. Start the car and turn you heater on to full heat. Let it warm up to proper temp, may/may not need to put more in rad. Keep an eye on the level in the rad it will expand and may overflow, if it looks like it will overflow use yout tester to remove some fluid. Once you see the coolant flowing throug the rad wait a few minutes, then put the rad cap on. Let it run a few more minutes to get the rest of the air out, then drive like normal. Check the fluid level in the overflow bottle (engine cold) over the next few days fill to proper level as needed.

Feb 18, 2015 | Dodge Cars & Trucks

1 Answer

Where is the water pump located on 1993 eagle vision 3.5 engine


the water pump usually is always located a little above the main pulley

Feb 26, 2012 | 1993 Eagle Vision

1 Answer

How to i flush a radiator on a 2000 expedition and what tools do i need?


you need, knife/ gear clamp,screwdriver /nut driver (for gear clamp) and garden hose
with water pressure hook up hot water is better
you can buy a can or to of rad flush but dishwasher soap works good (it wont suds up )
also rad flush kit with garden hose addapter (most kit are compatable)
1-drain existing coolant in container for recycling
2-locate heater return hose to block and cut to installed flush kit addapter
always better to reveres flussh system with engine off and rad cap removed
drain valve closed hook up garden hose and run hot tap water true system
it will eventually cove out your rad cap (surge tank) until it runs clear
know sut off the garden hose add your cleaning additives installed rad filler cap
run engine per direction on can or 10 to 15 min. sut off engine removed filler cap
open drain valve on radiator and drain out system open water from garden hose
run water until clean water run true shut off garden hose and removed cap off with
cap supplied with kit let system drain completly . repeat cleaning operation until
water runs clear
add 1 jug of concentrated coolant (will mix with ressidual water and finish filling
system with premix used recomended coolant only for your engine your freeze
point of new coolant should be above spec and will be fine
do not used pure concentrated coolant only .your ownners manual spec section will
give capacities system will hold

Apr 03, 2011 | 2000 Ford Expedition

1 Answer

Water pump on a chrysler 1996 eagle vision


If you have a V-6 engine. The timng belt is located under the timing belt cover on the fornt of trhe engine. The water pump is driven off the timing belt. If you change the water pump,you should change the timing belt at the same time.

Jan 26, 2010 | 1996 Eagle Vision

2 Answers

2002 dodge 1500 still overheating


when your engine is hot,check the temperature of your rad,if you get more than 30/50 degrees difference between the top and the bottom of the rad,you need to have your rad professionaly flushed.If you have a digital laser it will out perform any other temperature testing tool.

Jul 24, 2009 | 1999 Dodge Ram

1 Answer

Washer fluid doesn't come out when button pushed on turn signal


If the fuse is not blown, the pump assembly needs replacement.
Verivy 12VDC at the pump when switch activated.
Check your manual or back of the fusebox for location of the washer fuse.

Jan 15, 2009 | 1996 Eagle Vision

1 Answer

Eagle Vision overheating


look for bleeder screw on thermostat housing or front middle of intake manifold area.open bleeder while vehicle running bleed air out.

Jul 26, 2008 | 1997 Eagle Vision

3 Answers

Transmission fluid drain


I don't believe this pan has a drain plug. Loosen all the bolts and loosen the pan w/ a putty knife. Then slowly lower the pan at one corner to allow the fluid to pour out into a drain pan. Once most of it is gone you can handle it and not spill it all over the place.

May 15, 2008 | 1997 Eagle Vision

Not finding what you are looking for?
1997 Eagle Vision Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eagle Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Stewart Dibbs

Level 2 Expert

302 Answers

Are you an Eagle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...