Question about 2003 Mercedes-Benz M-Class

1 Answer

Rear window stuck down,motor sounds running.how to get inside cover off to check mechanism.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Mercedes-Benz Master
  • 1,619 Answers

Undo screws in door, if you have the wood trim carefully pry off to get to door bolts for the handle then take a flat screwdriver and pull door panel off door. Underneath there is plastic to help with dust and sound dampening, carefully pull that off and there you are.

Posted on Jul 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Front passenger window not working.


Could be switch problem or electric motor behind door cover.

Aug 06, 2015 | 2004 Suzuki Ignis

1 Answer

How to remove rear door glass?


Remove Inner door panel, usually, the door handle has a screw, behind the lever, on the inside, and may be covered by a plastic cover, take the screw out, and move the handle forward, then take, the side on clip, off, the rod.
remove, any inside door handles, screw to door, and then starting from the bottom, pull the panel towards you, unsnapping, the plastic clipps, holding them on the door.
Roll window down, till you can see the 2 nuts, holding the bottom of the window.
Now, run the window mechanism, all the way down, away from window, while holding window.
Now it is loose, twist the window, inside the door, front down, back up, so, it comes out, the top
Put back, same way

May 21, 2014 | 2001 Toyota Highlander

1 Answer

1996 Ford Crown Victoria


That is mostly caused by electrical or mechanical faults. Electrical probably as a result of water which may have entered the chamber while you were washing the car or driving under rain. If you are technical enough, try losing down the door cover, and see what the inside looks like. If not consult an expert pls.

May 23, 2013 | Cars & Trucks

1 Answer

The rear window wiper blade in stuck in an "up"


frozen motor. remove a rear door cover, and turn on rear wiper and listen for motor noise, also check fuse

Nov 05, 2010 | 1994 Mercury Villager

1 Answer

The rear passenger side window recently stopped working. i used the key to roll down all windows and all worked properly. i then rolled them all back up using the key and they all went up smoothly and at...


FIRST YOU WILL NEED TO REMOVE THE REAR PASSENGER INTERIOR DOOR COVER TO GET TO THE WINDOW MOTOR. ONCE REMOVED LOOK TO SEE IF THE WIRE IS STILL CONNECTED TO THE MOTOR. IF IT IS, DISCONNECT THE WIRE. ***IF YOU HAVE A MULTIMETER(OR KNOW SOMEONE WHO DOES) WITH THE IGNITION SET TO AUX, OR ON IT DOESNT MATER, TEST THE POWER COMING FROM THE WIRE. IF IT READS 9.5-12+V, THE POWER IS GETTING TO THE WINDOW MOTOR AND STOPPING, YOU NEED A NEW MOTOR. IF THERE IS NO POWER COMING FROM THE WIRE, YOU WILL NEED TO TAKE YOUR CAR TO A SHOP. IT IS NOT A FUSE SINCE ALL THE WINDOWS RUN OFF THE SAME FUSE AND RELAY.

**IF NO MULTIMETER IS AVALIBLE, TAKE A 12V POWER SOURCE (CAR BATTERY) AND RUN THE POWER DIRECTLY FROM THE BATTERY TO THE WINDOW MOTOR. IF THE MOTOR RUNS, BAD WIREING. IF THE MOTOR DOES NOT RUN, BAD MOTOR.

Aug 27, 2010 | 1996 Volkswagen Cabrio

1 Answer

Dodge caravan window driver side doesn't get down motor tries but is like it is stuck


sounds like the window regulator. this is the cable mechanism that the motor runs to pull the window up and down. sometimes after time the cables fray and break or get tangled. need to remove inner door panel to replace, and is usually sold as a set, regulator and motor together.

Feb 19, 2010 | 1999 Dodge Grand Caravan

1 Answer

2004 honda odyssey power window DRIVER door is stuck in the open position. Please help. Can't manually lift window up with inside door cover off.


if panel is off then , check for power at the motor if its getting power on one wire and ground on the other wire then motor is bad, to get window up remove 2 bolts at bottom of window were it bolt to the track, then you can pull up but must lock or jam window to stay up. try disconnecting motor conector and run a power and ground to motor flip conn to make go up or down, good luck.

Nov 06, 2009 | 2004 Honda Odyssey

1 Answer

2001 vw passat window stuck


You probably need a new mechanism.the crunching sound was probably the cable in the window mechanism getting tangled.

Aug 06, 2009 | 2001 Volkswagen Passat

1 Answer

My rear window will not go down from either inside switch or key on outside. What can I do?


You must remove the panel from the inside of the rear door and apply voltage with a jumper (+) wire from a 12 volt car battery which needs to be grounded with a jumper cable to the frame of the truck, since the window is probably stuck down it will be difficult to get acces to the switch's positive wire to unplug and apply voltage to it but if you can reach it and touch the hot wire to the window motor's positive wire you will be able to get the window up in order to work on and perhaps replace the switch, be careful not to get your hand caught in the mechanism when contacting the pos. motor wire or switch wire with power, as a matter of fact if you can use and aligator clip on the end of the jumper wire and attach that first to the positive switch wire or motor wire then connect to the battery that would eliminate the risk of catching a hand in the window mechanism, just wear safety glasses when making a spark near the battery when contacting the positive wire.

good luck

Jul 16, 2009 | 1986 Ford Bronco

4 Answers

My rear window is stuck down in my 1989 k5 blazer.


If you can hear the motor turning but window is not moving, then the window most likely came off it's track. You will have to remove screws and pry off the door panel and replace window on track

Jul 03, 2009 | 1989 Chevrolet S-10 Blazer

Not finding what you are looking for?
2003 Mercedes-Benz M-Class Logo

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...