Question about 2003 Ford F250 Super Duty Crew Cab

1 Answer

Some of the LED lights on the side view mirror of my 03 Ford F250 are not working. Is there a way to disassemble the mirror housing to inspect it closer??

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 63 Answers

Im Not Sure About The Disasembling Part But The Led Lights Are A Single Unit To Fix The Bulbs That Are Out you Will Have To Change The Whole Light Assembly in Most Cases

Posted on Jul 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove clearance lights housing


You can remove the lens and the housing, but you will have a large hole that will need body work and a rood repaint. Best to keep them. Here is a good installation link that shows the holes: http://www.powerstroke.org/forum/99-03-7-3l-exterior-discussion/181253-cab-light-install-pics.html

Oct 04, 2015 | 2001 Ford F250 Super Duty Super Cab

1 Answer

Outside mirror turn signal on 2001 Lincoln navigator does not work


I have changed many of these...Everytime I inspect one it is always the light that is faulty...and that is all different makes..I have found some have a left and right fuse but it was always the light..The mirror will slightly pivot..carefully pivot mirror slightly inward you will notice it is only held on with plastic clips..Use a good flashlight.....you can actually see behind mirror better at night with a direct beam small led pocket light...use a pocket screwdriver and carefully pry the clips away from mirror while softly pulling on mirror...All you have to do is release the 2 upper and lower outside clips and it will slide out..Then you will see the 2 screws that mount the signal light to the mirror housing..just remove and replace..re-install all the way it was removed...Do it carefully....easy job...

Jun 16, 2014 | 2001 Lincoln Navigator

1 Answer

2001 F250 mirror loose, how to tighten?


the triangel cover on the inside towards the front of the door. pop it off and youll see three 10mm bolts that hold the whole housing to the door.

Apr 11, 2014 | 2001 Ford F-250 Super Duty

1 Answer

03 ford f250 7.3 power stroke keeps blowing turn signal fuse.


Electrical issues are always a bit difficult to diagnose. Since I have not heard the wiring harness to be an issue on these, I would first look into if there was some add on causing an issue. Did you or someone add a trailer harness? Some type of additional lighting (like an LED bar)? Even possible a radio or under dash work? If not then do a once over and look at where the wiring comes through the firewall, or through the body to feed the turn signals. You just have to systematically follow the wiring from the lights back to the switch until you find the culprit. Let me know what you find and I can try to assist further.

Jan 03, 2013 | 2003 Ford F250

1 Answer

How do you install turn signal lens on side mirrors on a 2005 F250?


- Adjust the mirror so the mirror glass is in as far as it will go (meaning if you were looking in the mirror you would see the side of the truck)

- Look inside the mirror housing
- Locate silver clip
- Using a flat screw driver, push the clip in
- Lenses will pop out on the outside
- Remove bulb
- Replace bulb
- Snap back together when new bulb in place.

May 02, 2010 | 2008 Ford F-250 Super Duty

1 Answer

How to change mirror turn signal light, 2009 f250


- Adjust the mirror so the mirror glass is in as far as it will go (meaning if you were looking in the mirror you would see the side of the truck)

- Look inside the mirror housing
- Locate silver clip
- Using a flat screw driver, push the clip in
- Lenses will pop out on the outside
- Remove bulb
- Replace bulb
- Snap back together when new bulb in place.

Mar 27, 2010 | 2008 Ford F 250 Super Duty 4WD

1 Answer

How do I install a side view mirror on my F250?


The door panel must be removed to get to the wiring. On a 04 250 you need to: pop off the moulding covering the mirror mounting nuts. Pry the window switch plate forward then up to disconnect it, then unplug it . Rmove the screw behind the switch plate and behind the reflector. Push up on the door panel to remove it.

Mar 16, 2010 | 2004 Ford F150

1 Answer

I need wiring diagram for a 1999 Ford f250 side view power mirror. I am installing 2003 telescoping side view mirrors and the color code in different.


make your self a jumper set of wires to test with. Find out what makes what move on the old unit,write down the color wire,then apply power and ground to the new unit onw wire at a time.Mark down the color and what function it did.after testing both units then match your research and put the wires together.I wished I were there.Good Luck!

Jul 23, 2009 | Ford F-250 Cars & Trucks

1 Answer

Diesel fumes in cab, '03 f250


If its raw fuel fumes check for fuel leaks on top of the motor. If its exhaust fumes you probably have an exhaust leak on the cross pipe at the rear of motor over the transmission. Take a telescoping mirror and flash light have a look. Might even slide under neath and take a peak as well. Make sure wheels are chocked with something first.

Jan 05, 2009 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Side Mirrors will adjust side to side but not up and down.


There are two tiny motors in each mirror. one for up/down. One for side to side. They have jack screws (plastic) that fit into the motors.

You can manually put your hands on either side of the mirror and force adjust it. If you hear a ratcheting sound, the jack screws are OK. Then repeat with hands on top and bottom.

If you hear ratcheting and mirror stays where you stop it, that means one of the motors is bad. The motor assembly is available as a separate part.

-------------------------------------------------------------------------------------
Mirror Motor—Crown Victoria, Grand Marquis
Removal and Installation
  1. Disconnect battery ground cable. Refer to Section 14-01 .
  1. Remove outside Rear View Mirror Glass as outlined.
  1. Remove Outside Rear View Mirror as outlined.
  1. Remove two screws from outside rear view mirror motor.
  1. Remove outside rear view mirror housing from outside rear view mirror base.
  1. Disconnect connector and remove outside rear view mirror motor from mirror housing.
  1. To install, reverse Removal procedure.
1a865db.gif
Might be cheaper to buy used irror at car-part.com. Look for * to find page with cheapest part. Or, EBay. Good luck

Aug 11, 2008 | 1996 Ford Crown Victoria

Not finding what you are looking for?
2003 Ford F250 Super Duty Crew Cab Logo

366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...