Question about 2007 BMW 525xi Sedan
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if you changed the asc module, the module has to be programmed/coded after replacement. If it was a new part there should be no problem programming the new control unit. I would recommend taking the vehicle to the dealership to allow them to program the control unit.If you have access to the programming don't forget to take the asc module out of "end of belt line mode" and most likely the steering angle sensor will have to be aligned
Posted on May 03, 2009
Depends how competent you are here and what sort of tools you have.You will also need to replace oil filter if you wish to replace oil within the engine.The oil has to be drained from underneath the engine and allow it to sit for few hours while draining as this will ensure all the deposits at the bottom comes off.
Posted on Oct 28, 2009
SOURCE: where is the battery located
Quit looking under the front hood...it isn't there. The BMW and Porsche 928 folks love to put the battery in the back. BMW---in the trunk under the right (passnger side) access panel. 928----rear hatback a little left of center under the spare tire. Genius those Aryans.
Posted on Nov 04, 2009
Are you sure the Fan is turning to cool the Engine? If it is not coming on to cool Engine Check the Rad. cooling fan relay.
Posted on Jan 04, 2010
Testimonial: "very helpful will try solution ASAP was the one thing I overlooked"
SOURCE: oil change reset for bmw 525i
You only need to hold the left odometer reset button while turning the key to position 1 (Accessory). Keep holding the button for 5 or so seconds until any of the following shows in the display: OIL SERVICE or INSPECTION with RESET or RE. Release the button and press it again for another 5 or so seconds until RESET or RE flash. While the display flashes, press the button one more time briefly. If done correctly, END SIA should show up for a few seconds. All done.
Thank you for using fixya
Posted on Jun 07, 2010
Tips for a great answer:
Feb 24, 2015 | 2007 BMW 525i Automatic
Sep 19, 2014 | 1995 BMW 525i Sport
Jul 20, 2014 | 2007 BMW 525i
Apr 01, 2012 | BMW 525 Cars & Trucks
Jun 19, 2010 | Cars & Trucks
Jun 07, 2010 | 2004 BMW 5 Series
Apr 29, 2010 | 2007 BMW 525xi Sedan
Dec 17, 2009 | 2006 BMW 5 Series
Jun 27, 2009 | 2007 BMW 525xi Sedan
1,439 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: