Question about 2005 Chrysler Town & Country

1 Answer

Engine light came on no signs of any problem - 2005 Chrysler Town & Country

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

Don't be too worried about a check engine light. This light is usually triggered by an oxygen sensor malfunction. This will not cause the car to break down, however it is an annoying light to see. The biggest problem with bad oxygen sensors is that your fuel economy will go down and you could destroy the catalytic converter which becomes an expensive fix. If you get lucky the car will fix the problem itself, if it stays on for more than a week I would then bring the car to autozone and have them hook the computer up to your car (free) to tell you what component is experiencing a problem. If you like tinkering with cars then most of the problems you will be able to fix on your own, if not it might cost a few bucks at a garage

Posted on Jul 15, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Nov my ck engine light came on it read1763 andp1762 hadit erase now it jan truck acting like it want to cut off when i stop at a stop sign but ck engine light never came back on and plus i dont driv

possibly an O2 sensor. I've seen this condition. Everything works but occasionally at a stop sign the engine dies. My first check is to buy a new O2 sensor.

Jan 19, 2015 | Cars & Trucks

1 Answer

I have a sign on the dashboard that I dnt know what the symbol is

see this chart troubleshooting and fix it.
God bless you
Check Engine or
Malfunction indicator light (MIL)
The Check Engine or Service Engine Soon light or an icon resembling the engine is called, in technical terms, the Malfunction Indicator Light or MIL. The MIL light comes on when your vehicle's computer detects a fault that can affect your vehicle's fuel economy and emissions. There is no button to reset the Check Engine light, but if the fault that caused it doesn't happen again, the light will turn off by itself. If the MIL light stays on, have the problem checked out, because in some cases, the problem could get worse if not repaired in time. Think of the Check Engine light as an early warning sign. To check why your MIL light came on, your dealer or mechanic will have to diagnose your car with a special scan tool.

Sep 30, 2013 | Cars & Trucks

1 Answer

Check engin sign

There are many reasons that make check engine light on. you can read this article: Why check engine light is on. Maybe it is useful to you.

Sep 13, 2012 | 2004 Lamborghini Murcielago

1 Answer

Check engine light on, traction control disabled light always on, engine power reduce

i i have the samething here just reset the computer and the engine sign should go away its with the tc theres something wrong with it and it makes the computer seperate some part or disable which the transmission cannot work properly and the sign comes up for both
i learend ffrom sources from the internet.

Nov 17, 2009 | 2006 Pontiac G6

1 Answer

Car stalls while pulling up to stop signs or red lights

check battery connections tighten altenator belt or replace altenator

Jul 07, 2009 | 1997 Mitsubishi Mirage

1 Answer

Check the engin sign is on, on my 02 toyota tundra

You can turn the check engine light off by disconnecting the battery. the only thing is that the light may come back on if the computer sees the problem again. i would recomend getting your vehicle scanned to find out what the problem is that is turning your check engine light on.

Dec 23, 2008 | 1997 Chevrolet Astro

1 Answer

Engine sign is on.

I have a 2003 Dodge caravan and have 94000km. this morning the engine light was on but not only that the P R N D (park,reverse,neutral,drive) lights are all on. It is not making any funny noises..... What could be the problem?

Oct 07, 2008 | 2003 Dodge Caravan

1 Answer

"Engine Check" Sign

your engine computer has detected a problem and cut light on. check your gas cap if this is loose it will turn light on. if not will need to have code pulled. autozone will do this for free

Sep 18, 2008 | 2003 Toyota Highlander

1 Answer

Engine stalls at stop lights and stop signs

sounds like the torque converter lock up might not be disengaging. You might also want to check for engine vacuum leaks. Does engine idle smoothly when in park or nuetral ? if the idle is good I would suspect torque converter problem.

Aug 16, 2008 | 1993 Ford Bronco

Not finding what you are looking for?
2005 Chrysler Town & Country Logo

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides