Question about 2005 Jeep Liberty

1 Answer

Rear brake light on jeep cherokee sport 2003 (liberty in America)

I have taken out the 2 screws to the casing for the bulbs, but i can not seem to get the casing off. It feels as if it is spring loaded.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

CALL DEALERSHIP FOR HELP. IF SERVICE DEPT NOT HELPFUL ASK FOR PARTS MAN TO LOOK AT PARTS BRAKE DOWN ILLUSTRATION. BE NICE BUT TRY ANOTHER DEALERSHIP IF NEEDED. JUST USE THE ONE THAT IS HELPFUL WHEN SPENDING MONEY

Posted on Jul 19, 2009

  • type373 Nov 22, 2010

    You will have to pull towards the rear of the Jeep. It has two male pegs that insert into two female rubber ports. You will just need to pull with medium force and it will come out.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 jeep liberty sport and my brake lights are out. The 3rd brake light still works and I checked the fuse and its good. What else could it be? Please help !!!


change the bulbs in the two back tail lights they only cost around ten bucks and most higher quality oil changing stations can do it for you, if you do it yourself you take the light bessal off and with a screw or two and pop it out! Its fairly simple.. good luck

Feb 10, 2011 | 2002 Jeep Liberty

1 Answer

I need to know how to replace a light bulb in the rear.It is a brake light


hi..
follow these steps.

1.switch off the car
2.remove the tai light cover using screw drivers
3.remove the bulb ib the socket
4.replace with new bulb .make sure you choose than right power bulb or else it wont work
5.put back the cover

please vote me if the infomationwhich gave you was useful by clicking the thumb on your lower side of your page.

Jul 10, 2010 | 2007 Jeep Liberty Sport

1 Answer

How do i change the brake light on jeep liberty 2006?


1) You will need to open the rear swing door.

2) On the inside jam there are two torx headed screws (T-15's if I remember correctly).

3) Unscrew the two torx screws.

4) The light is now held by two mounting tabs (small spherical headed plastic sets that go through a rubber grommet).

5) You will need to pry the light casing off (easy pressure with a good size flat head screw driver will do the trick).

6) The light bulbs are twist mount settings inside the light casing.

7) Twist out the mount setting, change the bulbs, and reset the light mountings.

8) To put the light casing push the light casing back on and put in the screws. Everything else will work in reverse when it comes to assembling the whole unit.

2006 Jeep Liberty Replacement Light Bulb Sizes
Low Beam Headlamp Bulb Size: 9007
High Beam Headlamp Bulb Size: 9007
Parking Light Bulb Size: 2825 or 3157
Front Turn Signal Light Bulb Size: 3157
Rear Turn Signal Light Bulb Size: 3757ALL
Tail Light Bulb Size: 3157
Stop Light Bulb Size: 3157
High Mount Stop Light Bulb Size: 921
Fog/Driving Light Bulb Size: 9145 or H3-55W
License Plate Light Bulb Size: 168
Back Up Light Bulb Size: 3157
Front Side Marker Light Bulb Size: 168
Ash Tray Light Bulb Size: 161
Map Light Bulb Size: 578
Dome Light Bulb Size: 578
Step/Courtesy Light Bulb Size: 906
Trunk/Cargo Area Light Bulb Size: 578

Thank you for using fixya, and good luck

May 08, 2010 | 2006 Jeep Liberty

1 Answer

Break light out


BRAKE light...open the rear hatch/door and inside the jamb should be a screw(s) to take out...also, look between the bumper and bottom of the tail light housing for a screw or two

Jun 14, 2009 | 2003 Jeep Liberty

1 Answer

Need to replace rear brake light on 02 liberty


open tailgate and you will see two retaining screws remove these and give unit a tug to remove then you will be able to replace bulb

May 19, 2009 | 2002 Jeep Liberty

4 Answers

Fuse for brake light on 2007 Jeep Liberty


I dont have owners manuel and need to know what fuse is my brake lights ? All brakes lights are out . Thank you

May 03, 2009 | 2007 Jeep Liberty Sport

1 Answer

2002 jeep brake bulb


There are 2 screws in the inner part of the vehicle tkae those out and slowly but firmly pull the lamp out. if you need anything else go to collisionrepairadvice.com

Mar 12, 2009 | 2002 Jeep Liberty

1 Answer

Fog light bulb


in the bottom of the fog light is a cover held on by 2 screws...remove those screws and that should allow access to the bulb. this is per chrysler manual for 2001 cherokee factory installed fog lights

Nov 22, 2008 | 1999 Jeep Cherokee

2 Answers

Changing brake bulbs


Open the back gate of the jeep. There chould be 2 screws that hold in the light assembly. Remove the screws and pull out the assembly. Replace the bulbs and replave the housing.

Jul 20, 2008 | 2002 Jeep Liberty

Not finding what you are looking for?
2005 Jeep Liberty Logo

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...