Question about 2006 Pontiac Montana SV6

Open Question

Compass Stuck on N

The compass in my 2006 Pontiac Montana SV6 is stuck on N. How do I fix it?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: real right turn signal light - Pontiac Montana SV6 2005

If the 2005 Montana is similar to the 2001 Montana, I have a solution. First you'll need a hexagonal wrench (the 6-sided L-shaped wrench). The tail light assembly is held on by two screws. You'll need the hexagonal wrench to remove them, because a normal screwdriver won't do it. I also had to use a conventional adjustable wrench to get the leverage to turn the hexagonal wrench, because the screws were in there pretty tight. Once you remove the two screws, the whole tail light assembly should come off. Mine required a little force and I had to play with it a bit, but it came off without a lot of work. There will be one set of wires that connects the tail light assembly to the rest of the minivan--try not to damage that set of wires. Once you get the tail light assembly off, you'll have to take apart the assembly that actually holds the lights. No tools should be required. It's held on by four plastic catches. Just undo the catches (easier said than done, but still not too tough) and it comes apart. Then you can pop out the old light and pop in the new light. Then re-assemble. For me, it went back together much easier than it came apart.

Posted on Jan 03, 2009

Ad
  • 7 Answers

SOURCE: 2005 Pontiac SV6 Montana key fob unlocks doors but will not lock

For the sliding doors you need to clean the contacts, there are 6 or 8 on both sides, just wipe them clean as they are probably covered in oil/grease/grime.

Posted on Feb 14, 2009

  • 1 Answer

SOURCE: clunking from front end

CHECK FRONT STABILIZER LINK KITS FOR PLAY.
ONE ON EACH SIDE ATTACHED TO STRUTS.

Posted on Apr 26, 2009

wilsodfarm
  • 986 Answers

SOURCE: Changing the front brake pads on a 2006 Pontiac Montana SV6

Use a z clamp,Or us big azz pliers,Or use a hammer handle and put one of the old pad in and put the hammer handle in the and twist it will work.I hope this helps

Posted on Dec 13, 2009

  • 32 Answers

SOURCE: Where is the fuse box for a 2006 Pontiac Montana

on the driver side under the dash or the side by the door jam

Posted on Apr 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 PONTIAC MONTANA FUSE BOX DIAGRAM


On this website you find fuse box diagram for Pontiac Montana SV6 2005 - 2006

Pontiac Montana SV6 2005 2006 fuse box diagram Auto Genius

Mar 02, 2013 | 2006 Pontiac Montana SV6

1 Answer

Where 2005 Pontiac Montana SV6 heater fuse in the box


On this website (link below) you find fuse box diagram and description for Pontiac Montana Sv6 (2005 - 2006)

Pontiac Montana SV6 2005 2006 fuse box diagram Auto Genius

Feb 01, 2013 | Pontiac Montana SV6 Cars & Trucks

1 Answer

My 2006 Pontiac Montana SV6 front heater is just blowing warm. The rear heater is blowing cold. I felt the heater hose running to the rear underneath the van just before they turn up into the rear heater...


2006 pontiac montana
I suggest you try one of those instant download manuals. My nephew bought one for me when my car broke and we could fix it all by ourselves with the manual costing $10. This website reliable-store.com is very good for this.
?Try it.

Jan 23, 2018 | 2006 Pontiac Montana SV6

1 Answer

2006 Pontiac Montana wont start after replacing battery. Engine cranks as soon a key is moved from off, then continue to crank even after removing the key.


Sounds like your starter solenoid is stuck in the on position if you can get down there and have some one hook the battery on, hit the starter with a hammer some time this will disengage the starter.

Dec 13, 2009 | 2006 Pontiac Montana SV6

2 Answers

2006 montana sv6 remote starter causes alarm to go off


I have the same problem. Did you figure it out? It happened for me after the battery went dead and I changed it... R

Dec 07, 2009 | 2006 Pontiac Montana SV6

Not finding what you are looking for?
2006 Pontiac Montana SV6 Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...