Question about 1991 Chrysler Imperial

1 Answer

Can anyone tell me where the fuse link is on a 1990 Imperial?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 520 Answers

If it has one it will be in the positive battery wire in line to the solenoid. I will also let you know that most of these models have a main fuse in the engine compartment located in the relay/ fuse bank. If it is in line then it will look like a spliced piece of wire that will be burnt. If it is in the relay bank then it will be a large blade fuse with a high amp rating. Hope this helps. Please re-post with updates or questions. If this solution helped then please accept and rate. Thanks cj2176.

Posted on Jul 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuel filter for 1990 chrysler imperial located


Should be in front of one of the rear wheels in front of the gas tank.
You can follow the fuel line along the bottom of the car.

Aug 23, 2012 | 1990 Chrysler Imperial

1 Answer

Hazard lights, break lights, turn signal lights wont work. Ive changed all the bulbs and they still wont work.


have you checked to see if you have any power to lights. it might be a blown fuse! if you do not have a book on where the fuses are call auto-zone and they will tell you. or pull one fuse at a time to check. check to see if any power to bulbs. good-day ! if you have problem it might be a ground wire to lights.

Aug 25, 2011 | 1990 Chrysler Imperial

3 Answers

Speedometer not workin on a 1990 chrysler imperial, is it a cable disconnection or is there a module? the mechanic that looked at it said he doesn't think it has a cable.


If you have the digital dash the mechanic is probably correct. The "body control module" is located under the passenger kick plate and controls a multitude of unrelated functions like odometer, fuel gauge, and headlight covers. Replacement must be the same part number, and critical factors are digital dash, and EVIC (overhead display). I just replaced mine last week from the local pull it yourself yard. Applicable donors are '89 & '90 Imperal, Dynasty and New Yorker.

May 18, 2011 | 1990 Chrysler Imperial

1 Answer

Heater fan is not working, how do I check to see if it is the fan motor or just a fuse. Fuse in glove compartment looks fine


get a voltage tester first and see if you are getting power to your fan, if your are getting power and the fuse s good then your fan is bad.

Jan 11, 2011 | 1990 Chrysler Imperial

1 Answer

Brake system on 1990 imperial changed with system from same year car and cruise control does not work.


Brakes are very hard to push on, past owner claims power booster is problem. Can not find power booster?

Jul 05, 2010 | 1990 Chrysler Imperial

1 Answer

Is my voltage regulator in my ECM on my 1990 chrysler imperial. If so can i swap it with one from the junk yard.


Your output regulater for voltage is inside the altinator and if it is bad you will need to replace the altinator or have it rebuilt.

Feb 11, 2010 | 1990 Chrysler Imperial

1 Answer

DASH LIGHTS WON'T COME ON.THE FUSE IS GOOD 1990 CHR.IMPERIAL


tray to check fuse and relay. If both are okay. you can change the light bulb in dash board. Just take out the dash board, remove and replace the bulbs. Make sure fuse is okay. Is the signal light works in the dash board?. Let me know

Oct 04, 2009 | Chrysler Imperial Cars & Trucks

Not finding what you are looking for?
1991 Chrysler Imperial Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...