Sorry no you can't. You can pull the cable off the transmission shift arm and pull it yourself. It would have to go to a dealer to gt the new keys programmed. Looking at around $300.
Hot wire, no not unless you want to damage your steering Colum , what about You hire the tow truck to move it to a safe location, not the city , and then hire an lock smith to make you a new key , why do you only have one key to it anyway, most all cars come with two keys anyway
SOURCE: Lost my key to ford explorer sport 1999. Local
not as far as im aware. if you dont have another key, then they should be able to get your key code from their database. they may have to plug a computer into the car to access the cars key code.
SOURCE: my 97 blazer wont start or turn over, now my key is stuck
I had this same problem. Under your steering wheel column is a tab that pops out. Stick a small screw driver up about 5 inches. There is a plunger that is keeping your key in. It should pop right out.
SOURCE: '97 Sebring Convertible Replace Ignition lock cylinder w/o key
Go to the dealer with the VIN and they can cut a new key to fit the original cylinder.
320 views
Usually answered in minutes!
×