Question about 1992 Chevrolet Lumina

1 Answer

92 chevy lumina dies when braking hard also the cruise control doesn't hold speed. Both of these happen only after 1/2 hour of driving

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,129 Answers

It sounds like a faulty check valve, it is located inline with the cruise control vacuum line or the vacuum brake booster vacuum supply line.

Posted on Jul 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

TROUBLESHOOTING WHY YOUR CRUISE CONTROL DOESN'T WORK


There are many things that can cause your cruise control to act up or not work at all. This article will lead you in the correct direction on finding a solution to your problem. This article is for any type of vehicle.<br /> <br /> <b>If your cruise control won't hold proper speed, </b>you need to look at the following parts. <br /> <ol> <li>Faulty Cruise Control</li> <li>Faulty Speed Sensor</li> <li>Faulty Vacuum or Vent Valve</li> <li>Faulty Stepper Motor</li> <li>Faulty Transducer</li> <li>Incorrect Cable Adjustment</li> <li>A Binding Throttle Linkage</li> <li>Leaking Vacuum Tank</li> <li>Leaking Vacuum servo diagram</li></ol> <b>If your cruise control surges, </b>check the following parts.<br /> <ol> <li>Faulty Cruise Control Module</li> <li>Faulty Speed Sensor</li> <li>Binding Throttle Linkage</li> <li>Kinked Speedometer Cable</li></ol> <b>If your cruise control cuts out on you, </b>check the following parts.<br /> <ol> <li>Faulty Transducer</li> <li>Faulty Cruise Control Module</li> <li>Short or Open Circuit in Cruise Control</li> <li>Brake or Clutch Switch Adjusted too tight</li></ol> <b>If your cruise control doesn't work at all, </b>check these parts.<br /> <ol> <li>Faulty Cruise Control Module</li> <li>Short or Open Circuit in Cruise Control</li> <li>Faulty Clutch or Brake Switch</li> <li>Leaking Vacuum Circuit</li> <li>Faulty Stepper Motor</li> <li>Faulty Speed Sensor</li> <li>Faulty Transducer</li> <li>Faulty Cruise Control Switch</li> <li>A Blown Fuse</li></ol>

on Jul 20, 2011 | Ford F-150 Cars & Trucks

2 Answers

How do I set cruise control on 2001 buick lesabre limited. just bought car have no manual. cant get it to set.


If you push on and set and nothing happens, the system may not be working properly.
You can get an owners manual on Ebay.

Mar 22, 2015 | 2001 Buick LeSabre Limited

1 Answer

How do i set the cruise control on my 1994 mercedes c220 elegance automatic


Cruise Control
Any given speed above approximately 22 mph (35 km/h) can be maintained with the cruise control by operating the lever.
-see photo

  1. Accelerate and set: Lift lever briefly to set speed. Hold lever up to accelerate.
  2. Decelerate and set:
    Depress lever briefly to set speed. Hold lever down to decelerate.
    Normally the vehicle is accelerated to the desired speed with the accelerator. Speed is set by briefly pushing
    the lever to position 1 or 2. The accelerator can be released. The speed can be increased (e.g. for passing)
    by using the accelerator. As soon as the accelerator is released, the previously set speed will be resumed automatically. If a set speed is to be increased or decreased slightly, e.g. to adapt to the traffic flow, hold lever in position 1 or 2 until the desired speed is reached, or briefly tip the control lever in the appropriate direction for increases or decreases in 0.6 mph (1 km/h) increments. When the lever is released, the newly set speed remains.
  3. Canceling
To cancel the cruise control, briefly push lever to position 3.
When you step on the brake or the vehicle speed drops below approx. 22 rnph (35 km/h), for example when driving upgrade, the cruise control will be canceled.
4. Resume
If the lever is briefly pushed to position 4 when driving at a speed exceeding approx. 22 mph (35 km/h), the vehicle resumes the speed which was set prior to the cancellation of the cruise control. The last memorized speed is canceled when the key in the steering lock is turned to position 1 or 0.
Note:
If the engine does not brake the vehicle sufficiently while driving on a downgrade, the speed you set on the cruise control may be exceeded and you may have to step on the brake pedal to slow down.
As soon as the grade eases, the cruise controlled speed will again be maintained as long as the brakes were not previously applied, or the lever may be used to resume the previously set speed if the brakes were applied.

set-cruise-control-1994-mercedes-c220-sufrpujyrsap3pvz3w2boz5j-3-0.jpg
http://www.benzworld.org/forums/attachments/w202-c36-c43/153145d1197313761-pdf-owners-manual-w202-1995-2000-1999-c280_owners_manual.pdf

Feb 14, 2015 | Mercedes-Benz C-Class Cars & Trucks

1 Answer

CRUISE CONTROL WON'T WORK ON 2005 CHEVY TRAILBLAZER


check cruise control fuse and check the brake lights see if brake light working because the brake light switch will deactivate cruise control when brakes is applied.if brake lights dont work either fuse blowed or switch bad.if all is good have vechicle code scan because cruise control control by PCM and vechicle speed sensor and thottle actuator control motor.

Apr 17, 2013 | 2004 Chevrolet TrailBlazer

1 Answer

Cruise control on 1996 Chevy Silverado won't hold speed


Possibly a broken wire in the steering column. Wires goint through the steering column for the cruise are so fragile when the tilt is used alot causing the wires to brake. Part is $70.00 through advance auto. Cheapest I've found if you order online.

Feb 18, 2013 | 1996 Chevrolet Silverado 2500

1 Answer

I've been having problems with my cruise control, 2006 Ford Fusion SE. Sometimes it will set correctly and sometimes it doesn't. At times if I brake hard I can hit the off button and it will set...


cruise controls are funny things
you have to accelerate to a speed then turn it on and press set
It will cruise at that speed
if you touch the brake it will unset and you will have to press on the accelerator again to the speed and pres resume
if you want to accelerate to pass just press the accelerator until you have passed , then just take your foot off the accelerator and it will coast until the set speed
if you change gears , it will unset
if you touch the brake , it will unset
if you have it set and find the speed to fast , hold the set button and it will slow down to the speed you want
let the button go and it will set at the speed
if you want to go faster than the set speed press the resume button and it will speed up until you get the speed you want
from your description of the problem , it appears that you have misread the instructions in the owners manual

Mar 28, 2017 | 2006 Ford Fusion

1 Answer

How to use cruise control


Here are the steps in using cruise control:

  1. Get on a road you will be traveling at the same speed for a long period of time, such as a freeway.
  2. Reach your desired speed. Choose a speed that allows you to move with the flow of traffic and not go over or under the designated speed limit for that road.
  3. Locate the ON and SET buttons on your steering wheel. Press ON first and SET after. Your cruise control is now activated. Most vehicles must be traveling at least 30 miles per hour to set the cruise control.
  4. Press and hold the SET button if you wish to use cruise control at a higher speed. Hold until your desired speed is reached.
  5. Decrease speed by pressing the COAST button.
  6. Push the brake pedal to disengage the cruise control function. If you wish to return to the previous set speed, use the RES (resume) button. You must be traveling at least 30 miles per hour for this function to resume.
  7. Erase any previous speed by pressing the OFF button.

Feb 11, 2010 | 2000 Nissan Maxima

1 Answer

Cruise control not working on my Chevy Lumina 1998


Check the switch above the brake pedal. This is the switch the turns off the cruise when you hit the brakes. Make sure it is adjusted properly to allow the cruise to come on.

Sep 29, 2009 | 2001 Chevrolet Lumina

Not finding what you are looking for?
1992 Chevrolet Lumina Logo

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...