Question about 1990 Chevrolet K1500

1 Answer

Where is the bolt to release the belt from the alternator ?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

Looking at the front it should be top center it is a belt pully (tinchner)

Posted on Jul 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I adjust the tension on the alternator belt for my 2003 Hyundai Tiburon?


Adjusting alternator belt tension - bolt & pivot bracket design ...

? 13:06
https://www.youtube.com/watch?v=8JN0RtZk_2Y
Nov 26, 2012 - Uploaded by backyardmech
Releasing tension on the alternator belt to remove the alternator- 4 cylinder Honda in this video. ... How to ...

How To Install replace Alternator Belt 1999-06 Hyundai ...

? 4:51
https://www.youtube.com/watch?v=6IWgXTijclo
May 15, 2013 - Uploaded by 1A Auto Parts
How To Install replace Alternator Belt 1999-06 Hyundai Elantra 2.0L .... Adjusting alternator belt tension ...

Dec 21, 2015 | 2003 Hyundai Tiburon

1 Answer

How do i intall a/c belt alternator Belt and power steering belt for 350 engine


The power steering pump has has mounting bolts that also serve to hold tension on the belt. Same for the alternator. Loosen the bolts but don't take completely out, push the pump or alternator towards the engine to release tension. Replace the belts. Use a long handled pry bar to push against the alternator or power steering pump to apply tension to the new belt while simultaneously tighten the bolts.

Aug 20, 2014 | Cars & Trucks

1 Answer

2006 yaries removal of fan belt


- Loosen the alternator (generator) upper adjustable bracket bolt.
- Loosen the alternator lower bolt with 14 mm socket.
- Push the alternator toward the engine block to release the belt and take it out.
- Place the new belt on pulleys.
- Pull the alternator away from the engine block and make sure that the belt is aligned and seated properly on all the pulleys .
- Place a wooden hammer handle between the engine block and the alternator and pull the alternator away from the engine while
monitoring the tension of the belt.
- Do not over stretch the belt. Half inch of free play will be sufficient for the safer operation of the belt and bearings.
- Tighten the upper alternator bolt.
- Tighten the lower alternator bolt.

Mar 01, 2012 | 2007 Toyota Yaris

4 Answers

How to remove alternator on a 2005 range rover


Hi
Click here

the link above should tell you all you need to know if you get stuck or have any problems give me a shout back ok

Oct 26, 2010 | Land Rover Range Rover Cars & Trucks

1 Answer

How to replace the alternator on a 2003 Mazda MPV


Disconnect the battery at the positive terminal by turning the bolt counterclockwise. Disconnect the alternator's terminal by turning the nut counterclockwise and removing the loop from the terminal bolt. Store these connectors away from the battery.

Remove the belt by pressing on the tension pulley arm firmly, then sliding the belt form underneath the idle pulley wheel. Release the tension pulley and the belt will slacken; it can then be removed from the alternator pulley wheel.

Remove the alternator by turning the mount bolts counterclockwise, then sliding them out of the mount arms. Some models may have mount bolt heads that must be held in place with a wrench while turning the nut. With the mounts free, the alternator can be exchanged for a new unit. Position the new alternator into the mount arms and slide the mount bolts into place, locking them down with the nuts turned clockwise.

Wrap the drive belt around the alternator pulley wheel (groove side down), then press the tension pulley arm and slide the belt back under the idle pulley wheel. Release the tension arm and the belt will automatically adjust to the proper tension.

Reconnect the alternator's terminal loop by placing it over the bolt and turning the nut clockwise. Connect the battery by turning the positive terminal bolt clockwise.

Oct 21, 2010 | 2003 Mazda MPV

1 Answer

I want to change two belts (A/C and Alternator) on my 1999 Mitsubishi Mirage 1.5 car. What steps I am suppose to do.


First, feel the tightness of your belts. You will have to tighten the new belts to the proper tightness. If they are too tight, they will wear the bearings prematurely. If they are too loose, they will slip.

Alternator Belt Removal

db56f56.gif


  1. Loosen the alternator lock nut.
  2. Loosen the adjuster bolt.
  3. Rotate the adjuster bolt counter clockwise to release the tension on the belt.
  4. Remove the belt.
Similarly for the compressor belt

98b2b36.gif
  1. Loosen the lock nut.
  2. Loosen the adjuster bolt.
  3. Rotate the adjuster bolt counter clockwise to release the tension on the belt.
  4. Remove the belt.
5. Install the new compressor belt

6. Rotate the adjuster bolt clockwise until the belt is tight like it was before you removed it.

7. Tighten the lock bolt.

8. Install the new alternator belt

9. Rotate the adjuster bolt clockwise until the belt is tight like it was before you removed it.

10. Tighten the lock bolt.

11. enjoy life

Oct 12, 2010 | 1999 Mitsubishi Mirage

2 Answers

Alternator replacement: How do I release tension


there is a tensioner pully located in the belt path this part has a pulley on it... but it is flexable just put a socket on a breaker bar and put the socket on the pulley bolt and move the pulley the opposet way of the belt.... the tensioner can generlly move only one way reroute the belt on the motor

Mar 01, 2010 | 2002 Ford SVT Focus

1 Answer

How do you replace the alternator on a 2000ford contour



Removal & Installation

2.0L Engine
  1. Disconnect the negative battery cable.
  2. Remove air intake resonators.
  3. Remove the air cleaner-to-throttle body tube and the mass airflow sensor.
  4. Unplug the connectors and remove the cables from the alternator.
  5. Raise and support the vehicle.
  6. Release the drive belt tensioner and remove the drive belt from around the alternator.
    NOTE It is not necessary to remove the drive belt from the engine.
  7. Remove the alternator mounting bracket bolts and remove the mounting bracket.
  8. Lower the vehicle.
  9. Remove the power steering pressure hose bracket retaining nut and bolt and remove the bracket with the hose from the engine lifting eye.
  10. Remove the alternator mounting bolts and remove the alternator from the vehicle.
  11. To install:
    1. Place the alternator into position and install the mounting bolts finger tight.
    2. Install the power steering hose bracket and tighten the retaining nut and bolt to 70-106 inch lbs. (8-12 Nm).
    3. Raise and support the vehicle.
    4. Install the alternator mounting bracket and retaining bolts and tighten to 15-22 ft. lbs. (20-30 Nm).
    5. Release the drive belt tensioner and install the drive belt pulley over the alternator pulley.
    6. Lower the vehicle.
    7. Tighten the alternator mounting bolts to 15-22 ft. lbs. (20-30 Nm).
    8. Install the alternator connectors and the cables. Tighten the terminal nut to 80-97 inch lbs. (9-11 Nm).
    9. Install the air cleaner-to-throttle body tube, mass airflow sensor, and the air intake resonators.
    10. Connect the negative battery cable. To install:
      1. Place the alternator into position and install the mounting bolts finger tight.
      2. Install the power steering hose bracket and tighten the retaining nut and bolt to 70-106 inch lbs. (8-12 Nm).
      3. Raise and support the vehicle.
      4. Install the alternator mounting bracket and retaining bolts and tighten to 15-22 ft. lbs. (20-30 Nm).
      5. Release the drive belt tensioner and install the drive belt pulley over the alternator pulley.
      6. Lower the vehicle.
      7. Tighten the alternator mounting bolts to 15-22 ft. lbs. (20-30 Nm).
      8. Install the alternator connectors and the cables. Tighten the terminal nut to 80-97 inch lbs. (9-11 Nm).
      9. Install the air cleaner-to-throttle body tube, mass airflow sensor, and the air intake resonators.
      10. Connect the negative battery cable.


Sep 28, 2009 | 2000 Ford Contour

2 Answers

How do I release the tension in the serpentine belt?


there is an 8mm bolt right under the alternator. loosen that up then loosen the bolt on the idler pulley and itll come right off

Jun 14, 2009 | 1996 Nissan Sentra

1 Answer

I am changing my alternator and need to release the belt tensioner to remove?


if you need to release the belt. look at the front of you hood next to your raditor where all the stickers are. it should show you the diagram of the belt and it should show you where the tensiner is. you will need to release the tensiner to take the belt off. usually it is a pully about mid way down. you will either have to stick and 1/2 drive into it and pull it towrads you or use a crow bar to grap the bolt that sticks out. and pull on it that way. if you do not see a tensioner. than do this.

look at your alternator and see it should have 2 bolts holding it on. look and see if the is a slot where one of the bolts can slid back and forth. if so than all you need to do is loosen the bolt that does not slide but do not take it off. and than loosesn the bolt that slide. it will allow you alternator to move freely and release the belt. after that take the alternator off and install the new one. after that do not tighten the bolt the is able to slide as you will need this to move when putting the belt back on.
put the belt back on the use a crow bar to push the alternator away from you so it will tightn the belt. than have someone tighten the bolts back up and you should be good to go.

Jun 26, 2008 | 2002 Ford F350 Super Duty DRW Reg. Cab

Not finding what you are looking for?
1990 Chevrolet K1500 Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...