Question about 2001 Oldsmobile Silhouette

2 Answers

2001 Oldsmobile Silhouette....Power lock on my power door doesn't come up completely and the door doesn't open with or without the button. What can I do? I also believe my van has other electrical issues because the rear gate doesn't open with the button and back wiper doesn't work.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 27 Answers

From the back of the front door slide your hand in the sliding door crack and find the child-safety-lever. Push the lever up and/or down while moving the sliding door manual lock/unlock button to the up position. Also works on the non-powered sliding door.

Posted on Jul 18, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 398 Answers

The actuator is bad on the door lock. Check the fuse for the rear and check to see if you have power back there

Posted on Jul 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 OLDSMOBILE SILHOUETTE DOOR LOCKS INOP


Switch go to bad or loss or broke wire connections.

Apr 23, 2012 | 2001 Oldsmobile Silhouette

1 Answer

Unlock button doesn't work


need new switch about 45$ at junk yard

Feb 12, 2012 | 1999 Oldsmobile Silhouette

1 Answer

Power sliding door does not open


Check the buttons on the ceiling. There's one that locks the sliding doors from opening from the back. I hit it all the time by accident.

Jan 14, 2011 | 2000 Oldsmobile Silhouette

1 Answer

The passenger side power sliding door on my 2003 Silhouette binds up when opening and shuts automatically before fully opens. I have disabled the power control to the door to open manuallly. It still is...


sounds as if the cable is shot which means that the motor will have to be replaced cause i think after 01 they went from cable pulley to sleeved cable and cause of the frayed cable in the sleeve is causing the stiff door btw i have installed power sliding doors on my 02 venture and know the system intimatly

Sep 11, 2010 | 2001 Oldsmobile Silhouette

2 Answers

When in anything but park there is a constant beeping coming from the back of the van? what could this be? it is a 2001 oldsomobile silhouette


one of the doors is not shut properly prolly the power slider. "help" it close and it'll go away, or turn on the lock on the panel above your head.

Jan 27, 2010 | 2001 Oldsmobile Silhouette

1 Answer

05 caravan passenger power sliding door will lock but not open


READ YOUR MANUAL. THERE IS A SEQUENCE INVOLVING REMOVING A FUSE WHICH RESETS THE ELECTRIC DOOR OPENER. IT IS DESCRIBED IN THE MANUAL. EASY TO DO ONE YOU HAVE THE BOOK IN HAND.

Apr 15, 2009 | 1997 Oldsmobile Silhouette

1 Answer

2002 Old Silhouette Driver Power Sliding Door will not open


Look in your owners manual there is a procedure to reset the door controls. If that dosen't work maybe the motor is burnt out, it's in the left rear access panel.

Mar 25, 2009 | 2002 Oldsmobile Silhouette

1 Answer

Power door locks won't work


You need to have someone or yoursef check the body control module with a compatible scan tool. Thats where the problem you are having resides. It may need a software update or replacement. You can also disconnect the battery for a few minutes, that will cause the BCM to reset and may fix it.

Jan 21, 2009 | 2000 Oldsmobile Silhouette

3 Answers

Passenger power sliding doors won't open


most likely it is the child safetyy lock next time the door is open make sure the child safety is in the off setting

Aug 15, 2008 | 1997 Oldsmobile Silhouette

Not finding what you are looking for?
2001 Oldsmobile Silhouette Logo

1,269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...