Question about 2005 Chevrolet Silverado

2 Answers

NO TOW HAUL NO POWER TO SWITCH,NO POWER AT BOX UNDER DASH WHERE IT GOES INTO A HARNESS.LITE COMES ON IF POWER SUPPLIED.NO FUSE,NO RELAY????NO CODES PRESENT.SHOULD I REPLACE THE SHIFTER WITH THE BUTTON IN IT.?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Tow haul mode will not work on my 2005 chevy silverado, the light will not come on or anything and i tried pushing it while driving and the tranny still shifted the same..

Posted on Aug 26, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Likely wire in steering colum that goes to button, Remove bottom off of colum and check wire( on mine I had to pull off the lever for tilt before I could remove lower cover, it just snapped in). There is a spot it kinks when shifting

Posted on Feb 20, 2013

  • Robert Turley
    Robert Turley Jan 23, 2015

    I had the sme thing with mine it worked when I got it then eventually would not turn on again then I found out possibly the cable was sliced and took me to droping my drive shaft while fully loaded or overloaded and changing out my rusted out rear axle and differntial to finally remove the column and what did you know it was the wire ws broken. all i did was splice it and reconnected the wires then magic it works 'til this day.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the power window relay 1994 toyota camry


The power window master switch is supplied from the power main relay and M-fuse located in junction block 1, under the dash on the driver's side. See here p-9
http://www.turboninjas.com/camry/be.pdf

Jun 22, 2016 | 1994 Toyota Camry

1 Answer

No power to head lites cab lite fuel pump or igmition switch new starter start relay battery @13.04 volts


After you check all fuse & relays look under the dash & engine for melted wire harness.

Sep 14, 2015 | 1988 Ford F 150

1 Answer

2002 elantra no power to wipers radio head lights and heat


Please check for codes in the OBD system. Check Battery and Charging System. If no codes perform following test procedure.
Tests/Procedures: 1. Check the Black power connector in the under dash fuse box. Wiggle it with the lights on and see if they malfunction.

2. Wiggle the wiring harness from the ignition switch around the steering column with the lights on and see if they malfunction.

3. Monitor the key on battery voltage from the ignition switch at terminal 3, Red wire at the ignition switch to terminal 3 of connector I/P-E in the under dash fuse box.

4. See if the vehicle has any aftermarket accessories installed that may be tapped into that Red wire from the ignition switch to the fuse box.

Potential Causes With OEM Direct diagrams, components, TSBs, and R&R procedures
Ignition Switch
Output Speed Sensor (OSS)
Power Connector
Radio Wiring
Steering Column Wiring

Apr 07, 2015 | Hyundai Motor 2002 Elantra

1 Answer

2005 mercury mountaineer where is my power window dues box


dues box ? do you mean fuse box . There are fuses for the power windows in the under hood fuse / relay box ! F1.62 30amp fuse an there is a relay in the CJB - central junction block ,located under the driver side dash panel . Accessory delay relay , first one top left in the fuse box. That's a good place to start ! what if fuse an relay are good ? then what ? do you know how to use a DVOM - digital volt ohm meter ? Do any of your windows work ? The best place to start is the drivers door window switch ! All power to all windows come through that switch .The lite blue with black stripe wire is power wire at the switch !

Mar 15, 2015 | 2005 Mercury Mountaineer

1 Answer

My 2007 ,5.7L,Ram 1500 truck shuts down when upshifting, however if I put the transmission in the O/D switch off it does not. If the transmission is in normal or tow/haul mode the enginu suts down. A...


Your ASD should be powered by a fuse located under the hood in the power distribution center. I would check that fuse, then replace the actual relay as that is the cheapest easiest possible solutions. If the problem persist then that indicates that there is a problem causeing the computer to shut down the engine, seeing that it is linked to your transmission it could be a short in the harness but that is speculation with out a formal diagnosis.

Jan 16, 2014 | Cars & Trucks

1 Answer

Fuse for the Tow Haul switch


No, the switch is powered from the transmission, and if the had no power, you would not move. If the light is not coming on, then there is something wrong, like you are in S instead of D.

Oct 30, 2012 | Chevrolet Cars & Trucks

1 Answer

98 mercury trace no 12 v going to the ac compressor


check your fuse box for a blown ac fuse, fuse box usually under dash, sometime under the hood of the car usually on drivers side. bad switch?
check if you hot wire lead might be pinched and grounded out or broken wire between battery and switch

May 25, 2012 | 1998 Mercury Tracer

1 Answer

2001 dodge stratus 2.7l no crank no start. No codes present with diagnostic tool. When ignition switch is open cil light comes on but the wipers the Radio and the most of the dash lights do not come on....


look inside the fuse/relay box under the hood . remove the lid from fuse/relay box and look inside the lid. the location for the ignition system and the start system (fuse/relay) will be marked. check the fuses with a testing light for faulty fuse or relay. also check battery voltage with ohm meter for correct voltage. remove relay and use test light to check for power at the plugs with key on.

Apr 11, 2010 | Dodge Stratus Cars & Trucks

2 Answers

No brake lights,have replaced all bulbs and brake light switch is good what left


you could just have abrake light switch problem located on your brake pedal. i have ran across a bad connection at the fuse box.

1. Check power in and out of the dash fuse box. Power comes in through connector JB-10 and goes out of JB-05 and JB-07, all White/Green wires. The connectors plug into the back of the dash fuse box. If there is power in and no power out, the problem is in the dash fuse box.

Nov 07, 2009 | Mazda 626 Cars & Trucks

6 Answers

Trailer wiring for 2005 Ford Escape without factory tow package


I had the sam problem with my '02 escape when I installed the hitch. I changed the turn signal relay under the dashboard on the drivers side of the dash with one from an escape that had a tow package(one was blue and the other was yellow...). worked fine for me after that. Don't know if it changed later...

Oct 17, 2008 | 2005 Ford Escape

Not finding what you are looking for?
2005 Chevrolet Silverado Logo

1,507 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...