Question about 2003 Mitsubishi Eclipse Spyder

1 Answer

Had amplifier nd radio tested and they work. still get no sound!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have you checked the fuse. Open the drivers door, and right there at the edge of the dash is the fuse panel cover. Remove it. You will see relays on the left and bottom, 3 rows of fuses in the middle and 2 30 A fuses above that. ABOVE that behind the wire harness is another 4 fuse block. The fuse on the upper right is for the power amp.

Posted on Oct 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lost sound on 2005 impala. radio works. seems like amp problem.


Do you have base or up;level system ?

Table 1: Radio Features
Table 2: Cassette Features
Table 3: Compact Disc Features
Table 4: XM Advisory Messages
The radio receives power from the RADIO fuse in the junction block-right I/P. Ground is provided via G201 and G202. The radio is enabled/disabled by class 2 messages from the body control module (BCM). The radio routes audio signals from the digital radio receiver or the vehicle communication interface module (VCIM) to the speakers and/or amplifier when directed by class 2 messages.
The Entertainment System on this vehicle is configured with an AM/FM stereo radio with the radio data system (RDS) and either a cassette player or a CD player or both. CD and cassette. The uplevel system provides the customer with extended range speakers and an audio amplifier. Satellite digital radio (U2K) is available with uplevel systems.
The following list shows the radios available for this vehicle:
• Radio (ULO) - AM/FM Stereo, Cassette with RDS
• Radio (UNO) - AM/FM Stereo, CD and RDS
• Radio (UPO) - AM/FM Stereo, Cassette with CD and RDS .The complexity of the radio systems on these vehicle is mind blowing .

Your best bet take it to a GM dealer , has features you are unawear of .
DTC B1025, B1035, B1045, or B1055
When the radio is powered up, the radio supplies low level audio signals to the speakers. If the vehicle is equipped with an audio amplifier, the amplifier will boost the signal sent to the speakers.
DTC B1025 Audio Output Circuit
Install a scan tool.
Turn ON the ignition, with the engine OFF.
With the scan tool, monitor the DTC Information for DTC B1025.
Does the scan tool indicate that DTC B1025 is current?

Jan 31, 2017 | Cars & Trucks

1 Answer

Hogar - No sound from Boss Radio after initial installation test.


If you are hooked up to the factory wiring harness i would think there may be a factory amplifier that is not getting power or is bad.

Test the stereo by hooking a speaker up to the speaker out wires from head unit. if it has sound try to find out if there is a factory amplifier.

Good Luck

May 24, 2016 | Cars & Trucks

1 Answer

I have a 2009 GMC Yukon and rear speakers aren't playing


Does the system have an amplifier ?
Circuit/System Verification
Radio ON, Rear Seat Audio (RSA) OFF (if equipped), adjust the fade and balance controls on the radio to test all four channels individually. Each of the four channels should produce clear and even sound.
Without Amplifier Radio ON, verify clear audio is heard from each audio speaker.
?‡'
If audio is inoperative from all speakers, replace the radio.


?‡'
If audio is inoperative from one or more, but not all, speakers or the audio emitted from the speakers is not clear, refer to Speaker Circuit Malfunction - without Amplifier.
With Amplifier Radio ON, verify clear audio is heard from each audio speaker.
?‡'
If audio is inoperative from all speakers, refer to Amplifier Circuit Malfunction.


?‡'
If audio is inoperative from one or more, but not all, speakers or the audio emitted from the speakers is not clear, refer to Speaker Circuit Malfunction - with Amplifier.


Circuit/System Testing
Speaker Circuit Malfunction - without Amplifier

  1. Ignition OFF, disconnect the harness connector at the appropriate speaker.
  2. Radio ON, test for 5.0-7.5 volts between the signal circuit terminal A and ground.
  3. ?‡'
    If greater than the specified range, test the signal circuit for a short to voltage. If the circuit tests normal, replace the radio.


    ?‡'
    If less than the specified range, test the signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the radio.

  4. Test for 5.0-7.5 volts between the signal circuit terminal B and ground.
  5. ?‡'
    If greater than the specified range, test the signal circuit for a short to voltage. If the circuit tests normal, replace the radio.


    ?‡'
    If less than the specified range, test the signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the radio.

  6. If all circuits test normal, replace the speaker.

Apr 17, 2016 | GMC Cars & Trucks

1 Answer

2002 Mazda protege LX - Factory radio and after market radios both test good on the bench but dont work when installed in the car. Connectors seem to be OK. Speakers in the car test out good. Occasionally...


one of your speakers is blown and shorting out your deck. disconnect one sspeaker at a time and when it starts working fine you know that's the blown one.

Jan 03, 2014 | 2002 Mazda Protege

1 Answer

Ls430 radio


see this steps and fix it God bless you
It is overheating due to power issues. Check your power ratings to be sure they match the amplifier's specifications. There is a problem with the amplifier. If the power ratings are correct, the amplifier needs to be sent to a service center.There is a problem in the sound system or wiring. Try swapping amplifiers or bypassing that amp. If the problem persists on the right channel on both amps, check the wiring and sound system. There is a problem with the amplifier. Replace the amplifier that displays the problem or send it to a service center .

Jul 28, 2013 | Cars & Trucks

1 Answer

Dtc = B1025 Driver/pass Deploy Loop Short To Voltage What does this mean?


If your asking about the radio DTC this is what it is



Circuit Description

When the radio is powered up, the radio supplies low level audio signals to the speakers. If the vehicle is equipped with an audio amplifier, the amplifier will boost the signal sent to the speakers.
Conditions for Running the DTC

The test is performed when the radio switches from OFF to ON. The radio will continue to test for the fault once every 0.5 seconds.
Conditions for Setting the DTC

The radio sets a current status for this DTC when a short to ground or voltage is detected on any of the speaker channels for 1.5 seconds.
Action Taken When the DTC Sets

No sound is present from one or more of the speakers.
Conditions for Clearing the DTC

The fault condition is not present for 5 seconds.

What to do:Test the speaker outputs from the radio for short to ground or voltage. Inspect for poor connections at the harness connector of the radio. Reprogram the radio. Replace the radio.

Sep 10, 2011 | 2003 Chevrolet Silverado 1500

1 Answer

Radio won't turn on. Fuse blocks don't identify a radio fuse?


w/out amplifier; dome, and Cig. hint if you cigarette lighter is working and your dome light is working ,the problem is not fuse is the radio.

With amplifier. Amp, Cig, and Dome; again if cigarette lighter and dome light and amp fuse is good then amplifier is bad, or Radio is bad the only hint in this one is that the amplifier control sound if radio has ilumination then the amplifier could be the cause.

All this fuses are located by the lower left side of the steering column.

Jan 03, 2011 | 2005 Toyota Corolla

1 Answer

Radio quit working but they say it has an external amplifer is that true?


It hard to say, it could be the radio itself not putting out any sound or it could be the external amplifier. assuming the radio work fine, than it will be the external amplifier or visa-versa. the radio out put low frequency sound which we call it pre-amp line which run to and connected to the ext. amperfier, ext. amprefier then amplify the sound to the speakers. if the ext. amplifier if faulty than you will get no sound even though the radio is working properly. hope that make sense..good luck, if you need to replace the stock ext. amplifier, check on ebay for good deal, don't buy it new from a dealer, will cost you arm and a leg. you can also just replace the new entired radio systems (after market) but use the same speakers.

Oct 14, 2009 | 2006 Hyundai Sonata

Not finding what you are looking for?
2003 Mitsubishi Eclipse Spyder Logo

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...