Question about 1997 Oldsmobile 88

2 Answers

Where is my EGR valve at on a 2005 chrysler pacifica

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 108 Answers

It may not have one. If your unsure, haven't verified it has one due to many newer engines not needing them anymore, check an online parts store like advanceautoparts.com or autozone.com to see if its offered or even call around to see if its offered. If you know it has one, then check between the exhaust and the intake manifold. If there is a 1/2 inch metal tube on the intake then trace it back and you should find the EGR valve.

Posted on Jul 15, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 2,359 Answers

EGR = exhaust gas recirculation

A code may come up if the sensor do not get any deflection/detection of the valve opening.

Looking for an unit that bridge the exhaust to intake area on the passenger rear area.

The passage/tube can build up with carbon over time.

Clear out the tube also to prevent poor NOx emission test result.

Posted on Jul 15, 2009

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: program instruction garage door opener in 2005 chrysler pacifica

You can download the operators manual for free at chrysler.com. It has the instructions to program the garage door opener. It's fairly easy with the instructions.

Good Luck,
Ray

Posted on May 11, 2009

hotrodtod38
  • 141 Answers

SOURCE: Brake fluid reservoir on a 2005 Chrysler Pacifica

WHEN YOU OPEN YOUR HOOD LOOK DOWN THE DRIVER SIDE FENDER THEN LOOK LEFT ABOUT 10 INCHS AND YOU SOULD FIND IT IT WILL BE WHITE IN THE ENGINE COMPARTMANT AREA

Posted on Feb 14, 2009

shadtremonky
  • 353 Answers

SOURCE: How do you replace the EGR valve on a 2004

check with you dealer, that part may have a manditory extended warranty by law

Posted on Jun 24, 2009

  • 412 Answers

SOURCE: 2005 Chrysler T&C EGR valve solenoid problem

YOU NEED TO DISCONNECT THE BATTERY FOR 5-10 MINUTES FOR FAULTS TO CLEAR COMPLETELY..HAVE SEEN THIS PROBLEM BEFORE AFTER REPLACING AN EGR VALVE..IT WAS A TECH TIP FROM CHRYSLER ENGINEERING..THE EGR VALVE WAS THE PROBLEM,BUT THE PCM WOULD NOT LET THE CODES GO EVEN AFTER CLEARING THEM WITH SCAN TOOL..ALSO CHECK CONNECTIONS AT EGR CONNECTOR FOR SPREAD PINS

Posted on Jul 26, 2009

  • 93 Answers

SOURCE: im having trouble locating the egr valve on a 2005

should be on or near the head

Posted on Mar 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change egr valve on a 2005 chrysler pacifica ?


If car does not stay runnin or stalls wen slowin down is egr effects. It may be the gasket wher it connects to engine. Sonetimes u can blow out carbon in the valve itself. Seek a shopmanual at local library

Jul 27, 2015 | 2005 Chrysler Pacifica

1 Answer

How to put wires in egr solenoid


WOW THIS TOOK A LOT OF TIME TO FIND if image isn't below you can find it at autozont library

Oct 19, 2014 | 2005 Chrysler Pacifica

1 Answer

How to replace a EGR valve on a 2004 pacifica 3.5


The EGR is on the drivers side of the engine near the firewall side next to the exhaust pipe it has a wire to disconnect then take out the two bolts that hold the tube to the valve now remove the two bolts that hold valve to engine put back in reverse order

Sep 17, 2014 | 2004 Chrysler Pacifica

1 Answer

2004 chrysler pacifica 3.5l this code came up on my scanner and i was wondering if some one could help me if it is the valve, solenoid stuck.. Symptoms are rough idle some times my car dies but it has


Trouble Code: P0403

EGR Solenoid Circuit

Possible Causes:


EGR solenoid ground circuit is open.EGR solenoid control circuit is open or shorted to ground or to voltage.EGR solenoid power circuit is open.EGR solenoid is damaged or has failed.http://www.autozone.com/autozone/parts/Duralast-EGR-Valve/2004-Chrysler-Pacifica-2WD/_/N-jlfixZ93xpy?itemIdentifier=857100_0_0_PCM has failed.HERE IS THE EGR VALVE.CLICK ON LINK TO VIEW.

Oct 21, 2012 | Cars & Trucks

1 Answer

Chilton manual chrysler pacifica 2005 free


EGR is on drivers side rear by valve cover by exhaust pipe

Dec 11, 2011 | 2005 Chrysler Pacifica

1 Answer

How do i change the egr valve on a 2005 pacifica


How do i change the egr valve on a 2005 pacifica

Jun 26, 2009 | 2005 Chrysler Pacifica

Not finding what you are looking for?
Cars & Trucks Logo

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...