I need to see the interior of this boat in order to restore it correctly please

ARE YOU PARKED KEY OR KEY ON RUNNING.
SEE QUOTE PAGE32.
READ THE USERS GUIDE FREE IN THE GLOVE BOX
MINE 2010, DAY 1, I SET ALL LAMPS INSIDE TO DISABLED
THAT WAY NEVER COME BACK TO CAR WITH DEAD BATTERY NOW FOR 12 YEARS NOW, BY MY ACTS.
BUT MANUALS SWITCHES DO WORK.
This gets tricky with 3 switches in the car ,mine , 2 dome
and one on the head lamp lever.
even opening doors on mine, no dome lamp, by may settings, in the manual.
car run perfectly day or night ,correct?
one can say manual 2ways.]
at lever /button on dome.
or open any door is a manual act,
I disable every one allowed, by my needs. cover how in the guide
NO LED upgrades correct.?
mine the dome switches are on, off , auto, so I use off, and they never come on. ever.
on yours it is different PAGE 32 USERS GUIDE QUOTES,
"To protect the battery, the interior lights will
turn off automatically 15 minutes after the
ignition is moved to the LOCK position.
THIS SAVES BATTERY IF THEY FAIL.(MY COMMENT)
"This
will occur if the interior lights were switched
on manually or are on because a door is open.
This includes the glove compartment light
and the cargo area light.
To restore interior
light operation, either place the ignition in
the ON/RUN position or cycle the light
switch."

THIS IS A SUPER GOOD FEATURE,.
WRECKING $175 BATTERY IS NOT. CHEAP OR EVER FUN.

The best solution you' ll get from books at www.reliable-store.com

These are books containing info on repair, service, troubleshooting, parts info, assembling dissemble, removal, error/fault codes, wiring diagrams and everything on any vehicles cars, atv, trucks. forklifts, boats, excavators etc

This is a random choice for your engine.
You would really need the model and probably the serial to get the correct specs.
The Perkins Model AD3.152 engine used in Massey Ferguson 135 tractors built between 1968 and 1975 had the following torque specs.
45 hp
1211 ft pounds of torque at 1300 RPM
Max RPM was 2000

1. If you have the light switch in the wrong mode the lights will not operate when you open the door.

2. If the interior lights do not operate at all (ie you cannot switch them on and off manually)then you need to check the fuse for the interior lights.

3. When set to the correct mode, the interior lights will operate from a door operated switch so if the switch has failed the lights will either stay on or not operate at all when you open and close the door. Eventually these door switches fail with repeated use and need to be replaced. (Consider how many times the small door switch has been operated since 1996).

You shorted the interior lamps/or it is burned out. get the car manual and look for where the interior lamp fuse is located to check if its the fuse. IF all the courtesy lights on your doors are working, then your dome light bulb is burnt, check modifiedlife.com for the correct size bulb and order it from an online automotive lighting store for a fancy color or go to your local auto store for the standard bulbs they have available.

1-8-4-3-6-5-7-2 Distributor rotates clockwise vehicle , #1 cyl is on left side of engine

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

if it is 4 cylender it would be 1-3-4-2 hope this helps!. john

Yes, It's under the intake manifold. The manifold would need to be removed Lower hose from radiator is attached to steel pipe leading to it. It will not be an easy mission,and the new thermostat is rated for I believe 170 degrees. That's not much help to keep the interior warm with a rag top when it's 20 below zero.

You can boost the heating level by adding vinyl cover over the front portion of grill. Any boat interior shop has the material. Modify any large air leaks. Use the fan to keep fresh air filling vehicle, not recirculate.