Question about 2001 Ford Explorer Sport Trac

2 Answers

Where is the resistor in a 2001 ford explorer

Where is the blower motor resistor in a 2001 ford explorer sport trac?

Posted by on

  • purpledol466 Jul 15, 2009

    thank you very much

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 410 Answers

You have to remove your glove box and it is behind there. Here is a picture of where it is. This particular picture is from a 4 X 4 so if you don't have that it won't have the 4X4 part. Let me know if you have any more questions. Thanks for using FixYa!where is the resistor in a 2001 ford explorer - 5877c26.jpg

Posted on Jul 15, 2009

  • Keith Heavilin
    Keith Heavilin Jul 15, 2009

    If I solved your problem and helped you, a FixYa rating, or four thumbs up, is greatly appreciated as it helps my overall rating. If I didn't completely help you solve your problem, please let me know if you have further questions. Thanks again for using FixYa!

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,036 Answers

Check the blower motor housing.

Posted on Jul 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing blower switch resistor


its located in the air box under the passenger side dash about 8" from the blower motor. if you follow the wires off of the blower motor back it will take you to the resistor. unplug the connector and remove the bolts(small) and pull it out.

Aug 18, 2014 | 2002 Ford Explorer Sport Trac

1 Answer

What causes 2007 explorer sport trac heater blower to work only on high


heater blower motor resistor is defective....the resistor is not used when the fan switch is on high. Resistor requires replacement

Jul 15, 2014 | 2007 Ford Explorer Sport Trac

1 Answer

Replace blower motor resistor on 2002 Ford Sports track


On top of the blower motor where the electric wires are, you should see a plug end! unplug that wire plug, and you will have 2 smaall 1/4 inch screws ( 1 on each side of the prongs)! remove the 2 screws, and then remove that plate (the resistors will be on the inside of that plate.

May 17, 2014 | 2002 Ford Explorer Sport Trac

1 Answer

Ballast resistor


If you are talking about the blower motor resistor you can usually find it by looking at the blower motor and back tracing the wires. The resistor is usually mounted in the Firewall area, in the underhood ducts, and has a single electric plug-in. Usually 2 bolts hold the part to the duct. Check the Web for photos of your part.

Apr 23, 2014 | 2001 Ford Explorer Sport Trac

1 Answer

Blower motor resistor


Under the dash to the right .

Jan 27, 2013 | 2001 Ford Explorer Sport

1 Answer

Up and down movement on rear axle 2001 ford explorer sport trac


how do i pull out rear axle from my 2001 ford explorer sport trac

Jul 04, 2012 | 2001 Ford Explorer Sport Trac

1 Answer

Heater does not work makes clicking noises when turned on


With test light, verify you have power & ground to the motor, when ignition is on & switch is on high.If so, blower motor will need to be replaced. If not check fuse or blower motor resistor.

Jan 17, 2011 | 2005 Ford Explorer Sport Trac

1 Answer

2001 ford explorer sport trac wont start all the function turn on


check what the diagnosis machine will give if there is no data then check if the starter crank sensor is getting any power

Jul 26, 2010 | 2001 Ford Explorer Sport Trac

1 Answer

How do i get to the blower fan for2001 ford explorer dead mice in


How did they get past the cabin filter, if you have one?

Feb 08, 2010 | 2001 Ford Explorer Sport Trac

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

654 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...