Question about 1994 Land Rover Defender

3 Answers

Hi, I'm interested in buying a 1985 Land Rover Defender V8.Owner says the clutch is slipping when engine is warm. What is required to fix this and what would approximate cost be?

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 520 Answers

Aftermarket clutch kits for this vehicle run $500-750 and about the same for labor to remove transmission and service clutch and plate...allow $1500 for this repair.Dealer price for parts and labor could double this estimate...good luck

Posted on Jul 15, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

ON THE NEWER LAND ROVERS THERE IS PLATE YOU CAN REMOVE TO CHECK THE CLUCH. IT IS NOT THAT HARD TO REPLACE THE CLUCH,BUT PRTS ARE HARD TO COME BY. THE D110 CAME TO U.S. IN 1993 AND D90 CAME IN 1994,95,97. SEARCH FOR LAND ROVER PARTS ON THE NET.

Posted on Jul 29, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Land Rover Master
  • 2,359 Answers

STOP.

You will need a rear main seal / rear engine seal.RIGHT NOW!!!

You will need to drop the engine + trans to get to the rear engine seal.

It's not a EZ job.

Do not salvage any clutch part because that are soak in oil already.


You will need rear main seal,clutch set and lot of labor to get back on the road.

Great barging power if you are doing the working yourself,

Posted on Jul 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My land rover defender 110 v8 is over charging the battery, what is wrong with it?


The alternator regulator is faulty. You will need to take it to a auto electrician to repair it or just replace the whole alternator.

Oct 20, 2015 | Land Rover Cars & Trucks

1 Answer

Spark plug gap for rover v8


on a land rover theyre between 0,38 y 0,41... you may wanna go inbetween on yours..

Jan 27, 2012 | 1993 Land Rover Defender

1 Answer

Land rover v8 carburetor - starts cold fine but


check the distributor advance unit pull the pipe off and then **** on advance unit to see if the diaphragm moves and stays in ,because the membrane goes then it will not start ,so you advance the distributor and it will start ,but once it gets hot the engine will not start unless you ****** the timing that bit .then when you do that it will not start when cold .

Apr 19, 2010 | 1993 Land Rover Defender

1 Answer

Removing Filler Cap on a 1986 Landrover County Wagon


no there is no trick .its just jame ....so put some wd40 on it .especally key hole & some on sides ....U will open it ...tc

Mar 12, 2010 | 1993 Land Rover Defender

2 Answers

Hi , I am considering purchasing a 1986 Land Rover County wagon (110 Defender), the engine is a petrol V8. What sort of fuel consumption should I expect or can you direct me to a www that may have that...


The car you are looking into has the same engine as this car (link) http://www.fueleconomy.gov/feg/sbs.htm The gas millage on that car would be 12MPG (city), 14MPG (highway) and a combined gas millage of 13 MPG. Hope it helps and please rate the answer if it was helpful to you, thanks!

Mar 08, 2010 | Land Rover Defender Cars & Trucks

1 Answer

Unsure if this is the paint part number BTR0171


if yours is a defender 110 then thats a rare machine .. there were only 500 in the country. ..
here is some good info on identifying all land rovers
http://www.roverparts.com/How_to_Identify_Rover.cfm

this is info on your defender
http://www.roverparts.com/Model/Defender110.cfm

under ..body parts.. they show lots of stuff for land rovers but little for your model since its so rare.
they claim they have a full line of parts for the defender so maybe a call to them might hit pay dirt

some interesting stuff about the defender here including some colors ..
http://en.wikipedia.org/wiki/Land_Rover_Defender#Special_editions

here is some paint colors for 93 land rovers
http://www.automotivetouchup.com/choosecolor/choosecolor.aspx?year=1993&make=Land+Rover&model=All+Models

this gives the color as alpine white and gives instructions on how to find paint codes
http://www.roverparts.com/Parts/PPNUC.cfm

maybe too much information but everything about that machine is so interesting .. and it still has high value .. maybe a classic

1993 land rover defender specs
http://www.parkcity4x4classics.com/index.php/specs/defender

a forum on the defender
http://forum.landrovernet.com/forumdisplay.php/69-Land-Rover-Defender/page3?order=desc

Feb 19, 2010 | 1993 Land Rover Defender

1 Answer

Fitting rear view mirror


Hi you can buy little double sided pads to do this but make sure the cab is warm when you fit it.

Alternatively superglue but you will need to hold it in position and tape it up to dry, Pads are the better option. let me know if you need a stockist and I will post you the link.

regards

dan

Feb 01, 2010 | 1995 Land Rover Defender

1 Answer

Squeaking from clutch


hi my name is neil and im time served on land rovers this was a problem with the first ones that came out and it was the clutch that was at fault. it was made on the cheap and needed to get replaced most landy dealers should be able to do the job in under 3 hours but i think the book time was 6 so if you do get it done watch them do it so they dont over charge you.

Dec 16, 2008 | 1997 Land Rover Defender 90

Not finding what you are looking for?
1994 Land Rover Defender Logo

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...