Question about 1998 Hyundai Tiburon

1 Answer

Timing a 2.0L hyundai - 1998 Hyundai Tiburon

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 382 Answers

RETAIN PUSHROD WITH SUITABLE PIN THROUGH HOLE IN TENSIONER BODY.
INSTALL AUTOMATIC TENSIONER UNIT TO TENSIONER BLOCK. TIGHTEN BOLTS TO 22-27.
FIT TIMING BELT IN ANTI-CLOCKWISE DIRECTION, STARTING AT TENSIONER PULLEY.
SLACKEN TENSIONER PULLY BOLT. TURN TENSIONER PULLEY CLOCKWISE TO TEMPORARILY TENSION BELT. TIGHTEN BOLT TO 43-45NM.
TURN CRANKSHAFT SLOWLY 1/4 TURN ANTI CLOCKWISE.
TURN CRANKSHAFT CLOCKWISE UNTIL TIMING MARKS ALIGNED.
SLACKEN TENSIONER PULLEY BOLT. FIT TOOL TO TENSIONER PULLEY.
APPLY CLOCKWISE TORQUE TO TENSIONER PULLEY. TIGHTEN BOLTS.
INSERT SPECIAL TOOL IN TIMING BELT REAR CASING.
SCREW IN TOOL UNTIL PIN CAN BE REMOVED FROM AUTOMATIC TENSIONER.
REMOVE SPECIAL TOOL.
TURN CRANCSHAFT TWO TURNS CLOCKWISE. WAIT 15 MINUTES.
ENSURE TIMING MARKS ALIGNED.
CHECK EXTENDED LENGTH OF PUSHROD IS 3.8 - 4.5MM
RE-ASSEMBLE

Posted on Jul 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hyundai Sonata 2.4 2006 Timing chain tensioner


Watch the video. Also this engine has a timing belt not chain. You must replace the pulleys, the timing belt and the water pump when doing this service
Hyundai Timing Belt

Jul 05, 2016 | 2006 Hyundai Sonata

2 Answers

My 2002 vw cabreo does not idle very erratic it has the 2,0L gas


1) Ignition time is incorrect. Reset the ignition timing to the specification of manufacturer.
2) Test the ignition system. see the diagram attached. God bless you.

5_15_2012_6_51_13_am.jpg5_15_2012_6_51_32_am.jpg

May 15, 2012 | Volkswagen Cars & Trucks

1 Answer

How to aline crankshaft position and camshaft position


Timing marks for a 2002 Volvo S40 2,0L engine:

tdisline_335.jpg
tdisline_336.jpg

Oct 13, 2011 | 2002 Volvo S40

1 Answer

Does the 2002 hyundai santa fe have an interference engine? It has a 2.4L 4-cylinder.


Hi:
All of the engines in Hyundai santa fe are interference engines, so you should regularly change your timing belt. The timing belt also drives the water pump, so it is always a good idea to change that too, if you have the engine apart for the timing belt. Here is a link to check out!

http://www.theautopartsshop.com/auto+car-usa+parts/hyundai+santa-fe+engine-timing-belt.html

Apr 21, 2010 | 2002 Hyundai Santa Fe

2 Answers

Need the timing marks for 2001 hyundai tiburon


1.5L And 1.6L Engines

a826891.jpg

Fig. Proper pulley alignment for timing belt installation at TDC-Hyundai 1.5L DOHC engines


4e7384e.jpg

Fig. Proper pulley alignment for timing belt installation at TDC-Hyundai 1.5L SOHC engines



1.5L Engines

238c1f1.jpg

Fig. Proper pulley alignment for timing belt installation at TDC-Hyundai 1.5L DOHC engines


b1c71ee.jpg

Fig. Proper pulley alignment for timing belt installation at TDC-Hyundai 1.5L SOHC engines


c200f83.jpg

Fig. Proper pulley alignment for timing belt installation at TDC-Hyundai 1.5L SOHC engines, 1.6L similar



1.8L (VIN M) And 2.0L (VIN F) Engines

656db91.jpg

Fig. Proper alignment of the timing belt alignment marks for belt removal and installation-Hyundai 1.8L and 2.0L (VIN F) engines



2.0L (VIN P) Engines

7208166.jpg

Fig. Oil pump and crankshaft inner timing belt sprocket alignment marks-Hyundai 2.0L (VIN P) engines


7080ea8.jpg

Fig. Timing belt sprocket alignment mark locations and positioning for belt removal and installation-Hyundai 2.0L (VIN P) engines



3.0L (VIN G)

3b377fb.jpg

Fig. Installation of the timing belt-3.0L (VIN G) engine




7b32092.jpg


Fig. Timing belt sprocket alignment mark positioning for belt removal and installation-Hyundai 3.0L engine


Hope this helped (remember comment and rated this post).

Apr 13, 2010 | 2001 Hyundai Tiburon

2 Answers

Assent 2002 timing


try Hyundai.com...maintenance manual available in online form

Aug 07, 2008 | 2002 Hyundai Accent

2 Answers

Timing belt replacement


here are the marks you request

May 29, 2008 | 2003 Hyundai Santa Fe

Not finding what you are looking for?
1998 Hyundai Tiburon Logo

379 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...