Question about 2003 Jeep Liberty

2 Answers

How do i switch the serpentine belt - 2003 Jeep Liberty

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,498 Answers

Here's how to get a serpentine belt on or off (You'll need to do both). It's easy and doesn't require a prybar. Be sure to make note of the belt routing prior to taking the belt off.


On:

  • Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar.
  • Get the belt around all the pulleys except the A/C compressor or Alternator.
  • Locate the tensioner pulley. It's one of the smaller ones and is mounted on a spring loaded arm. It's job, as the name suggests, is to keep the belt tight. Get your socket on the center nut of this pulley.
  • Slowly pull the ratchet toward the center of the engine. The pulley will pivot on the arm allowing you to get the belt on the final pulley.
  • Slowly release the tension.
  • You're done
Off:
  • Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar.
  • Locate the tensioner pulley. It's one of the smaller ones and is mounted on a spring loaded arm. It's job, as the name suggests, is to keep the belt tight. Get your socket on the center nut of this pulley.
  • Slowly pull the ratchet toward the center of the engine. The pulley will pivot on the arm allowing you to get the belt off one of the pulley's (A/C or Alternator is best)
  • Slowly release the tension.
  • You're done

Mike

Posted on Aug 01, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 30 Answers

There is a "belt tentioner' on the front of the engine you will be able to get a wrench or socket on it to take the tention of the belt then slide it off to put it back on repeat the process using the diagram on the radiator suport

Posted on Jul 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Serpentine belt diagram 2002 Ford escort zx2


The picture is for a zetec. Let me know if wrong diagram?
26017169-0d1su300qx55v1h5u01lpo5r-3-0.jpg

Dec 21, 2015 | Ford Cars & Trucks

1 Answer

Serpentine belt


Nope. As long as it's a serpentine belt and not the timing belt. the serpentine belt is exposed and the timing belt is covered.

May 09, 2013 | 2007 Chevrolet Aveo 1.5

1 Answer

Just put serpentine belt on 1999 ford explorer, now it wont turn


I know this is an obvious answer, but I would guess its not on correctly.
If you don't have a diagram on the hood or the radiator support, let me know. It can be easy to switch pulleys when you change the belt.

Jul 24, 2012 | 1999 Ford Explorer

2 Answers

Trailblazer serpentine belt diagram


Hi, first, keep this diagram around as you will need it to route the serpentine belt when you reinstall it. There may also be a diagram under the hood by the radiator.
7e98dff.jpg Next, follow this link and watch the video that shows you how to replace a serpentine belt...
http://www.wonderhowto.com/how-to/video/how-to-inspect-and-replace-your-car-s-serpentine-belt-267229/
Take care

Aug 03, 2010 | 2002 Chevrolet TrailBlazer

1 Answer

Looking for diagram of serpentine belt


0996b43f80208ca1.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-3.0L (VIN U) engine


0996b43f80208ca2.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-3.0L (VIN S) engine


0996b43f80208ca1.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-Ford 3.0L (VIN U) engines


0996b43f80208ca2.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-Ford 3.0L (VIN S) engine


0996b43f80208c9f.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-Ford 3.4L SHO engine


0996b43f80208ca0.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Water pump drive belt routing-Ford 3.4L SHO engine
i wasnt sure what engine you had hope this helps good luck

Jan 15, 2010 | 2000 Ford Taurus

2 Answers

Need diagram of drive belt assembly forcaddy


You didn't list your motor size so please pick the applicable diagram:

ba0b112.gif
Accessory serpentine belt routing—4.8L, 5.3L & 6.0L engines

9dcebd3.gif
Accessory serpentine belt routing—5.7L engines with A/C

bb89ba7.gif
Accessory serpentine belt routing—5.7L engines without A/C

27f4999.gif
Accessory serpentine belt routing—6.5L Diesel engines

4d67005.gif
Accessory serpentine belt routing—7.4L engines

491a0a4.gif
Accessory serpentine belt routing—8.1L engines

Oct 26, 2009 | 2002 Cadillac Escalade Ext

3 Answers

NEED DIAGRAM FOR ROUTING THE SERPENTINE BELT


PLEASE DON'T FORGET TO RATE--You didn't post the size of motor so please pick the applicable one:

e8f5627.gif
Accessory serpentine belt routing—4.8L, 5.3L and 6.0L engines

793398d.gif
Accessory serpentine belt routing—4.3L, 5.0L and 5.7L engines without A/C

b701ba4.gif
Accessory serpentine belt routing—4.3L, 5.0L and 5.7L engines with A/C

a8d5a93.gif
Accessory serpentine belt routing—6.5L Diesel engines

7f5d3cb.gif
Accessory serpentine belt routing—7.4L engine

10dba31.gif
Accessory serpentine belt routing—8.1L engine

Oct 22, 2009 | 2004 Chevrolet Express

2 Answers

Diagram needed


HELLO THERE: Here is a link that will help you out ok dont forget to rate this soultion this helps me out too 1994 buick lesabre serpentine belt removal 1994 buick lesabre serpentine belt removal. Custom made wrestling belts ... money belt zipper. chest injuries from seat belts. serpentine belt diagram 30 mitsubishi ...beltpedia.info/1994-buick-lesabre-serpentine-belt-removal.html

Aug 15, 2009 | 1994 Buick LeSabre

2 Answers

Is a "starter belt" and a "serpentine belt" the same thing???


No such thing as a "starter belt". If they are refering to the belt that routes around the alternator, part of the power supplying system...then yes. But, this is only if you have 2 seperate belts. A serpentine belt is one entire belt that routes over all of the pulleys. Easy way to check, look at your belt. If you see one, it's a serpentine. If you see two, you have accessory belts. But, you should have a serpentine belt....1 belt.

Your motor has one belt, a serpentine...

86ac409.jpg

Jun 28, 2009 | 2006 Ford Taurus

Not finding what you are looking for?
2003 Jeep Liberty Logo

557 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...