Question about 1998 Ford Taurus

1 Answer

How do you remove interior door trim on 2001 GMC Yukon?

Window won"t go up

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 56 Answers

There are two Bolds kinding Behind the Handle on the door.
One under the Lock cover ( the little square one) that you move to manually lock and unlock side is red the other is black.
then You remove that little panel with the panel by the door handel ( the one that pops open the door) and basiclly take a soft plastic Wedge and stick it between the door and frame. Dont forget to pop up the window and door lock switch with a soft screw driver. And disconnec the harnesses( dont worry they all are Sizes diffrent) so they all go ack in the their own place. Then Pop off the door panel sofftly if it is your first time. bc Gm is Cheap and things break.

Posted on Jul 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to take off door panel of a 1996 GMC Yukon


  1. Remove the window handle by depressing the door panel and removing the retaining clip.
  2. Remove the door lock knob.
  3. Remove the armrest.
  4. Snap off the trim covers and remove the screws retaining the assist strap, if so equipped.
  5. Remove the 4 screws securing the lower edge of trim panel.
  6. Remove the screw at the door handle cover plate and the screw located under the arm rest pad.
  7. Remove the trim panel by carefully prying out at the trim retainers located around the perimeter of the panel.

Jun 13, 2015 | 1996 GMC Yukon

1 Answer

How do I remove the driver side door panel on a 1994 Lincoln Mark VIII


Remove mirror mount cover assembly.
Remove inside door handle cup (22634).
Remove door lock control bezel.
Remove window control bezel.
Remove interior lamp lens.
Remove screw from interior lamp assembly body.
Remove screw from window control bezel opening.
Disconnect mirror, lock switches and memory seat on driver side from bezels and wire harness.
Disconnect window switches from window bezel and wire harness.
Lift front door trim panel (23942) vertically, out of weatherstrip and over lock rod.
Disconnect interior lamp (13776) from wire harness.
Remove front and rear door trim retention hooks into door inner panel.
To install, reverse Removal procedure, paying special attention when inserting inner door trim into weatherstrip. Rock inner door trim into weatherstrip and push downward until lower trim belt character ditch lines up with score mark on inner door panel.

Aug 16, 2014 | 1994 Lincoln Mark VIII

2 Answers

How do I remove the inner door panel on a 2007 GMC Yukon XL Denali to get access to the door opening/lock rod system?


Welcome to Fixya

Disconnect the negative battery cable first to ensure your safety. You will see a small trim panel a few inches above the interior door handle (behind the armrest). Pry off the panel with the trim panel tool or a flat-head screwdriver. Remove the two 10 mm bolts that are behind the small trim panel. Pry off the vertical trim panel mounted on the handle that connects the power window controls and the door panel. Once the panel is removed, use the socket wrench to pull out the two bolts behind it. Pry off the small plastic piece around the door lock tab (upper part of door handle). Once the piece is removed, detach the door lock tab with your hand. Unfasten the sail panel using the trim panel tool or the flat-head screwdriver. The sail panel is on the corner of the door panel, directly across from the outside mirror. The panel is only attached by clips. Pull your interior door handle toward you, and pry off the trim panel behind it. Remove the bolt made visible with the panel removed. Pry up the power window control panel. Then unhook the electrical harness from the rear of the panel. Use the door trim tool to unhook the door panel clips. Insert the tool between the door panel and the door, and release the clips. There are several clips on each side of the door panel. Push the door panel up, then pull it away to remove it from the door.'

Thank you for using Fixya!

Aug 21, 2011 | 2007 GMC Yukon XL Denali

1 Answer

Need to put new window motor on gmc yukon


Remove door panel to get at it. Motor may be good and regulator or other issues need attention. Open it up and check it out.

Mar 26, 2010 | 2001 GMC Yukon XL

1 Answer

How do you remove factory stereo amplifier on 2001 Yukon XL


There is an outer trim that circumferences the Dash and radio panels. This trim is a snap in. I pulled mine out by hand. After pulling the trim loose I had to lower the steering column all the way and put the car in drive to easily remove the loosened trim.

Dec 20, 2009 | 2001 GMC Yukon XL

2 Answers

How do I remove the passenger side interior rear door panel on a 2000 Yukon to access the window regulator?


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Pull back the weather seal and you'll be able to get to everything.

Sep 18, 2009 | 2000 GMC Yukon

1 Answer

How do i remove the front drivers interior door trim. I need to resecure the door lock to the door frame on the 2001 town car


remove any screws you see, including the plate and screws by mirror, and remove lock and window controls, then take a big flathead screwdriver or pry bar and pry around the panel exactly next to the plastic screws pins that hold panel on door. After door is completely loose, then lift up and pull off.

Jul 20, 2009 | 2001 Lincoln Town Car

1 Answer

Passenger power window in my 2002 GMC denali keeps sliding down


well look for little pop outs first then then look for screws in those little openings then look on the outside edge of the trim panel for retainers to remove then pull the mirror cover off just pops of then pop out bottom of the door and then pop out the sides of the trim then pull up and out should come right off after that take vapor barrier off and then you will see the interior parts of the door and mechanics of the door/ Please rate my response thank you very much

Dec 29, 2008 | 2002 GMC Yukon Denali

1 Answer

2001 Yukon XL Rear Air


all trim is vissible screws or plastic dowel cover with screw under and plastic push clips on the side you cant see so grap a corner and pull

Sep 24, 2008 | 2001 GMC Yukon XL

Not finding what you are looking for?
1998 Ford Taurus Logo

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...