Question about Dodge Caravan

1 Answer

1997 dodge caravan adjust a/c belt. I can see the

1997 dodge caravan se w/3.0 I need to adjust a/c belt. I can see the tentioner bolt. now what? Thanks...

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,674 Answers

Just loosen nut in center of pulley, tighten adjuster, then re-tighten nut in at pulley

Posted on Jul 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the pully located to losen tention on belt so I can get belt on altinator


Usually the bolt is just above the altenator so the pulley moves down Hope this helps

Apr 12, 2011 | 2005 Dodge Caravan

1 Answer

Belt tensioner removal


it haves 1 bolt you will need to find the right size socket and put it on a braker bar to get it loose then reverse to put new one on

May 05, 2010 | 1997 Pontiac Grand Prix

2 Answers

Need step by step to replace water pump on 1997 dodge caravan v-6 3,0 mits. motor...


Chrysler Caravan/Voyager/Town and Country 1996-1999 Water Pump - REMOVAL & INSTALLATION
3.0L Engine
See Figure

a812cd7.jpg

Fig. 3: Water pump mounting detail-3.0L engine
  1. Disconnect the negative battery cable.
  2. Drain the cooling system.
  3. Remove the drive belts. Remove the timing belt covers and the timing belt.
  4. Remove the water pump mounting bolts.
  5. Separate the water pump from the water inlet pipe and remove the water pump.
  6. Inspect the water pump and replace as necessary.

To install:
  1. Clean all gasket and O-ring surfaces on the water pump and water pipe inlet tube.
  2. Wet a new O-ring with water and install it on the water inlet pipe.
  3. Install a new gasket on the water pump.
  1. Install the pump inlet opening over the water pipe and press until the pipe is completely inserted into the pump housing.
  2. Install the water pump-to-block mounting bolts and tighten to 20 ft. lbs. (27 Nm).
  3. Install the timing belt and timing belt covers. Install and adjust the drive belts.
  4. Reconnect the negative battery cable. Fill the cooling system to the proper level with a 50 / 50 mixture of clean, ethylene glycol antifreeze and water.
  5. Run the engine and check for leaks. Top off the coolant level, if necessary.

Hope this help (remember comment and rated this).

Apr 13, 2010 | 1997 Dodge Grand Caravan

1 Answer

I can change the serptine belt but i wanna know how do i take out the small belt right next to it,because I dont see a tentioner for that small belt.1998 dodge caravan.


Good day
it sounds like the power streeing pump belt, all you have to do is loose the pivot bolt and then loosen the adjustment bolt and you will be able to move the pump to remove the belt. If you don't know what the pivot or adjustment bolts are look at the pump and you will see bolts just loosen those until the pump moves

hope this helps

Cheers.

Jul 13, 2009 | 1998 Dodge Caravan

1 Answer

Starter 1997 caravan se


If you dont have a lift , you will have to crawl under the car and work on your back, there are 2 bolts that hold the starter to the transmission housing and then there are electrical connections for the starter, you should disconnect the battery before you do any work.

Jul 04, 2009 | 1997 Dodge Caravan

2 Answers

I cant figure out how to put alternator belt on. im not sure which pully loosens tention


RUN THE ENGIJNE AND WATCH THE BELT U WILL SE ONE OF THE PULLEYS IS ON AN ARM AND JITTERS AS IT AUTO TESIONS THE BELT THAT IS THE ONE U MUST RELEASE WITH A SPECIAL WRENCH.

Jul 04, 2009 | 1997 Dodge Caravan

1 Answer

Need to replace just the belt for the ac on a 2000 doge caravan


there should by a small pully (called a tentioner) under the alternator pully, get a wrench that fits the nut in the middle and turn it counter clockwise this will loosen the belt to get it around the other pully. Ps. this is easier with two people, one to release tention and one to put the belt on.

May 15, 2009 | 2000 Dodge Caravan

1 Answer

1997 dodge caravan waterpump replacement


OK, disconnect neg battery cable, drain cooling system, remove splash shield under right front fender for easy access to water pump bolts, loosen clamps and disconnect hoses from pump, remove drive belt, remove water pump pulley bolts, remove pulley (tip: loosen bolts on pulley before removing belt), remove water pump bolts (5) , separate from the front cover, clean the bolt threads and the threaded holes in the front cover to remove any corrosion and sealant, remove and discard o ring and clean mating surfaces, careful not to gouge or scratch mating surfaces, install new o ring into the groove, install the pump to the front cover and tighten to 105 INCH pounds, pulley bolts are 21 FOOT pounds.Good Luck! countrycurt0

Oct 05, 2008 | 1997 Dodge Caravan

2 Answers

1999 dodge caravan


There is a tension pully located under the alternator. It has a bolt head in the middle of it. Place a long box end wrench on it and pull it towards you. The tensioner will move forward. first put the belt on the pullies properly. (see diagram placed at left side of the hood release). Then leave the belt off the pully that is located just under the motor mount. Pull back on the wrench that is placed on the tensioner as you at the same time place the belt onto the pully under the motor mount. Done. Remember that the tentioner may need to be replaced also. It might be a good idea to do that since that is the usual reason the belts jump off. Just a couple bolts with that and done. It is not expensive.

Sep 28, 2008 | 1999 Dodge Caravan

1 Answer

Serpintine belt


nope just the idler pully or the belt tentioner

Jul 07, 2008 | 2000 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

290 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...