Question about 1995 Isuzu Rodeo

1 Answer

Help replacing radiator support 1995 Isuzu Rodeo

I am replacing the radiator support on a 1995 Isuzu Rodeo. I would like any advice, instructions or illustrations that might help in this project.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

Chiltons from any parts store or haynes manual will help you out alot

Posted on Jul 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to know where is the location of switch to turn on the radiator fan


1995 Isuzu Rodeo is equipped with a belt driven fan with a viscous fan clutch for engine cooling. The electric fan is for A/C condensor cooling only. The condensor fan is switched on and off by the A/C fan relay, which is operated by the triple pressure switch located in the A/C line on the left side of the engine compartment.


12_4_2011_8_54_27_pm.gif
DO NOT
attempt to replace the triple pressure switch without first using the proper equipment to evacuate and recover the freon in the A/C system. The A/C system is under high pressure and attempts to replace parts without discharging the system can result in serious injury.

Dec 04, 2011 | 1995 Isuzu Rodeo

1 Answer

My 1995 isuzu rodeo is overheating, We have already changed out the water pump and the thermostat. What else could it be?


if it overheats quickly, you may have a blown heat gasket - if it overheats slowly, check your fan clutch - if it is worn out the fan won't turn fast enough - also check inside the radiator to see if the passages are clogged - if there is a lot of build up around the openings then you will need to replace the radiator or take it to a radiator shop and have the top removed so they can clean out the passages - also make sure there is nothing obstructing the flow of air through the radiator like leaves or paper that might have blown up from the road - good luck and have a nice day :O)

Aug 05, 2011 | 1995 Isuzu Rodeo

1 Answer

What does repairing the freeze plug on a 95 Isuzu Rodeo entail?


ENGINE BLOWING FREEZE PLUG IS CAUSED BY RUST OR CORROSSION DUE TO TIME WEAR, HEAT STRESS, OR ENGINE GETTING TOO HOT PRESSURE BUILT UP DUE TO.ENGINE BLOCK CLOGGED NEED FLUSHING ALSO RADIATOR.REPLACE THERMOSTAT ALSO.

Jun 22, 2011 | 1995 Isuzu Rodeo

1 Answer

Replace the timeing belt on1995 isuzu rodeo


I have instructions in .pdf that you can view on your computer. Send me your email with the subject TIMING BELT and I'll be happy to forward it to you.

sernst@insightbb.com

Apr 05, 2011 | 1995 Isuzu Rodeo

1 Answer

Camshaft sensor went out on my 1995 isuzu rodeo, i just bought one, but cant seem to find out where it goes. Can i get help on this?


on the 3.2L its located right on the right front of the timing cover just behind large radiator hose

Aug 13, 2010 | 1995 Isuzu Rodeo

1 Answer

1995 Isuzu Rodeo 4cyl 5-speed 2.6L engine starts and runs smooth for 1 min then idles rough, misses and dies. Just replaced oxygen sensor, had head and gasket replaced after overheating, fan clutch...


make sure you are using the right firing order and all the plugs are good i head this problem could just need to adjust the timing just a bit

Aug 08, 2010 | 1995 Isuzu Rodeo

2 Answers

Crank Sensor in 94 Isuzu Rodeo


it's on the bottom of the motor, towards the back on the passenger side. It has a small clip of wires and one screw holding it on. You may want to pull it up on ramps- if it'll run- otherwise, get under the Rodeo, it's up a little higher than the oil pan, and to the passenger side. (it's right on top of the two lines that run to the bottom of the radiator.) You will need a 10mm socket to remove it. I have added a few pics showing the location (i just completed this task myself)
bfcf016.jpg61ae995.jpgdeffbd6.jpgdd2e415.jpg

Jul 13, 2009 | 1994 Isuzu Rodeo

Not finding what you are looking for?
1995 Isuzu Rodeo Logo

Related Topics:

297 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14378 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...