Question about 2004 Mercedes-Benz C-Class

1 Answer

I have a 2001 olds silhouette 4*2 6-3.4l-F1 4d And i have a problem with my Gas tank sending Unit my car had got vandlized in 2008 and someone had put something in my car something like a green coolant in fuel tank and i took my car to Chrysler plymouth inc. in 2008. and they fixed the problem but when i went to pick up my car my fule gauge was not working but i took my car back in 2009 and they are saying that it have nothing to do with them it's on me what do i do so fare as the sending unit go.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers

Testing by FixYa Staff

Please do not rate this post!

We apologize for any inconvenience.

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oldsmobile Silhouette gas gauge, circuit board and arm are not making good contact?


You must replace the fuel level sending unit, it is not repaired.

Sep 12, 2016 | 2002 Oldsmobile Silhouette

1 Answer

How to fix stuck fuel gauge on 2008 pontiac torrent?


Someone will need to figure out if it is the gauge on the dash or the sending unit inside the gas tank.

Sep 11, 2014 | 2008 Pontiac Torrent GXP

1 Answer

My gas gauge does not work on my 2000 olds silhoutee, it jumps up and down. What does this mean?


Your problem is in the fuel pressure sending unit. It senses the level of the gas with floats on the fuel pump and the sensor on the sending unit (on the ring @ the top of the fuel tank) sends a signal to the computer in the van telling you how much gas you have by showing it on the gauge. Unfortunately you will have to change the whole sending unit.

Jun 29, 2012 | 2000 Oldsmobile Silhouette

1 Answer

2001 Olds Silhouette: plenty of gas in the tank but the gage will read full, 3/4 full, 1/2 full, and everywhere in between. Van runs fine. No other issues except the gage goes crazy and can't depend on...


2000 Olds Silhouette: plenty of gas in the tank but the gage will read full, 3/4 full, 1/2 full, and everywhere in between. Van runs fine. No other issues except the gage goes crazy and can't depend on what it says. ...

Aug 12, 2010 | 2000 Oldsmobile Silhouette

1 Answer

What can be the problem if the fuel gauge says


Ground from sending unit to frame could be corroded.

Jul 23, 2010 | 2003 Oldsmobile Silhouette

1 Answer

My 2008 chevy malibu fuel gauge dose not read only some times when its a full tank the gauge is dead but about 1/4 tank it reads but gos in and out ?


this is caused by a defective gas gage sending unit, the sending unit is part of the fuel pump module inside the gas tank, the gas tank must be removed to replace the fuel pump module that also contains the sending unit.

May 30, 2010 | 2008 Chevrolet Malibu Classic

1 Answer

Gas guage is floating around and not reading right.


fuel pump sending unit in the fuel tank is more than likely faulty,installing a new fuel pump module should fix the problem

Jan 19, 2010 | 2001 Oldsmobile Silhouette

1 Answer

How to replace gas sending unit on 99 olds cutlass


First disconnect and remove the battery.
Then, remove gas cap to release pressure. Than remove fuel lines and drain gas into suitable container. Next, loosen the bolts (you can use a tranny jack or have someone else help hold tank and lower it down.
Now you will want to use a BRASS punch. (do NOT use metal or it will cause a spark)
Use brass punch and hammer and loosen nut on tank counter-clockwise to loosen sending unit.
Once nut is loose, pull out sending unit and unplug the wire harness.

Reverse procedure to reinstall

May 23, 2009 | 1999 Oldsmobile Cutlass

Not finding what you are looking for?
2004 Mercedes-Benz C-Class Logo

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...