Question about 1986 Ford Mustang

1 Answer

Gas odor on 1996 ford mustang, no leaks visible

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 103 Answers

There was a problem with these. i think it was the evap canister or try the purger solenoid line if no fuel leaks found. make sure fuel line to fuel rail are ok and not rubbing

Posted on Jul 15, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Smell gas aftr driving

Was the fuel pump recently replaced? If so, the smell is coming from the seal where the fuel pump seals to the gas tank. It's a large o-ring and if not put in properly you get the gas odor.

May 10, 2014 | 2002 Ford Mustang

1 Answer

Ammonia type odor coming from ac vents.......why?

Please shut off the a/c immediately and check for gas leak. It oculd be dangeorus if children are in and so be careful to find out the leak. You will need to get assistance from an A/C service centre as the leaks have to identifed using pressurised air.

Jun 28, 2010 | 1996 Ford F150 Regular Cab

1 Answer

I have a 1996 mustang 4.6. when i start my car it runs at 2000rpm.will finally sttle at 1000rpms after few min. the rpms will not drop when you push in the clutch. just put a new idle air control valve on...

perhaps there is a air leak at the mating surface. if you have a bottle of propane, use it to ckeck for leaks around the gasket/mating surface. start the engine. open the valve on the bottle DO NT LIGHT direct the gas around the mating surface. if the r's go up you have a leak. it is possible that since this is new, the computer was used to the old one and needs time to adjust

Feb 24, 2010 | 1996 Ford Mustang

1 Answer

2002 mustang gas tank

Contact customer service for ford the # is in your owners manual.

Jan 10, 2010 | 2002 Ford Mustang

2 Answers

Strong gas odor

  1. The fuel lines may have a leak: Replace leaking fuel lines and/or fuel line fittings.
  2. The engine may have mechanical problems: Check vacuum lines and fittings for leaks. Check engine compression. Check for broken fittings and mounts.
  3. The fuel pressure regulator may be operating at too high a pressure: Perform fuel pressure test and repair or replace faulty component(s).
  4. The ignition timing may be set wrong: Check and adjust ignition timing.
  5. The fuel injectors may leak: Clean or replace fuel injectors.

Sep 15, 2009 | 1996 Ford Explorer

1 Answer

Mustang gas tank removal

yes to do it the right way you should take the tank out of the car empty and rinse out then replace when completly dry

Jun 24, 2009 | 1996 Ford Mustang

2 Answers

1996 ford mustang convertible ac blows cold only from defroster

Check the vaccum line at the vacuum distribution block (to the right of the brake master cylinder). It's the smallest vacuum hose.

Jun 11, 2009 | 1996 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5653 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides