Where is the thermostat located on a 2005 dodge durango?

Question turned around for clarity.
Question moved to model category.

Bank one is drivers side.
Sensor 1 is closest to the engine and before the Catalytic Converter.
Sensor 2 is just after the Cat in the exhaust.

Same as this

https://www.2carpros.com/questions/where-is-the-bank-i-oxygen-sensor

More here. Check that the wiring is intact, as it is odd they have both failed.

https://www.google.com/search?q=2005+Dodge+Durango+4.7L+V8.+Bank+1+sensor+1+and+2

..

Fuse F17

View more images Web results

Dodge Durango (2004-2009) fuses and relays

https://fuse-box.info > dodge > dodge-durango-2004-2...
2005 - Interior Fuse Box. It is located in the left kick panel behind the cover. The location of the ...

Your best resource for support on Chrysler products is here Allpar Dodge Chrysler Plymouth Jeep and related cars minivans and trucks

Have you looked on the transmission just behind the engine block? A lot of the Dodge vehicles get readings of the flexplate/flywheel.

I believe it is located on the passenger side firewall.

Thermostat is located near the bottom of the engine, unlike most thermostat locations.

To install the EGR Valve on a 2005 Durango first it is necessary to remove the air intake hoses and palce them to the side. Next, in order to get the EGR valve you will need to remove the windshield wiper motor, which is a pain but necessary to do get to the EGR valve. After removing all of the itemsthat are in the way you will be faced with a task that will try your patience, the EGR valve is located on the right side of the motor, (as if you were facing the motor from the front) just behind and to the rear of the throttle body. After you locate it you will need a rachet with a flexible head because it is fairly difficult to reach otherwise. A mirror and light will also help so you can see what you are doing since the EGR valve is located in such a hard place to see and get to that you will only be able to see part of it while you are removing the screws. After removing the EGR valve, simply reversethe procedure and your done. P.S. I own a 2005 Dodge Durango SLT with a 4.7L engine and I replaced mine this year after a check engine light came on and I checked the code on the OBD. By the way the EGR valve is a pain in the rear to change. Good luck!

where the top radiator hose connects to the engine,remove the hose and that is the thermostat housing,remove the two bolts holing it to the engine and pull it from the engine,there is your thermostat

THERMOSTAT IS LOCATED ON ENGINE FRONT TIMING COVER ON A 4.7L ENGINE..FOLLOW LOWER RAD HOSE FROM RAD,YOU WILL SEE A PLASTIC HOUSING WITH 2 BOLTS IN IT..THERMOSTAT IS LOCATED HERE..TIIMING COVER..TRY TO GET AN OE THERMOSTAT..MAKE SURE YOU REMOVE BLEED PLUG AT ENGINE SIDE OF UPPER RAD HOSE WHILE REFILLING COOLING SYSTEM..MAKE SURE ALL HOSES GET HOT AND LOTS OF HEAT FROM HEATER..REINSTALL BLEED PLUG WHEN COOLANT STARTS COMING OUT OF IT..LET ME KNOW HOW YOU FAIR OFF

under the glove box there is an access panel remove panel and replace filter