Question about 1998 Jeep Cherokee

2 Answers

I need a fuse panel diagram to replace the turn signal flasher. Thanks

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,615 Answers

Before replacing the flasher does the hazards work, Try wiggling the turn signal lever up and down and back and forth with the key on and the lever in each position. If the blinkers or hazards start flashing you'l need a multifuntion switch. This isnt a definative test if you get nothing you may have a blown fuse. As fas as the flasher goes, go buy one and then you will know what it looks like.

Posted on Jul 14, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Blinkers work, driver side hazard flasher works but NONE of the others work. I have been told by 3 auto parts stores that I need to replace the flasher relay which NO ONE can seem to locate. I do not have the manual and I am trying to locate where the flashing relay is located. Is that the same thing as the multifuntion switch? Where are either of these located for a 1998 Jeep Cherokee Limited?

Posted on Sep 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I find the turn signal flasher on a 1995 ford ranger?


You may need to get a shop manual to get the wiring diagrams.
You have a flasher for the hazards and one for the turn signals. They are two different circuits. It is unlikely both have failed at the same time.
One flasher should be on the fuse box under the dash and the other is probably behind the radio.

Sep 10, 2012 | Ford Ranger Cars & Trucks

2 Answers

Have a 1988 Jeep Wagoneer with a few issues. My turn signals no longer blink or flash that I know of..?


Okay, the first thing to check is to turn on the signal on one side and see if the outside signal light comes on. if the light comes on then try replacing the flasher. Also see if your 4way flashers work or if they are also out. if they are out then check your fuse first.
If the fuses are good then try the flasher, if the flasher does not solve the problem then you may need to replace the turn signal switch. I have worked on a few of these and most of the time it was a flasher or the turn signal switch. good day.

Mar 02, 2012 | 1988 Jeep Cherokee

1 Answer

Signal lights stopped working


If the fuse is good and the flashers work then you have a bad signal flasher, this car uses two flashers in one located under the dash, one controls the hazard lights and the other the signals, these are all inside one flasher, so turn on the hazards to locate it by listening to clicking noise. i have inclosed a diagram to help locate it. its on leftside kick panel by your left foot, replace the flasher and see if that does it, good day12_6_2011_6_03_02_pm.gif

Dec 06, 2011 | 1991 Honda Accord

2 Answers

Turn signals don't work,fuses good, on my 1998 mitsubishi galant


Hi, replace the flasher. It's below the instrument panel, left of the steering column. Looks like the picture below.



jturcotte_365.jpg

Mar 26, 2011 | 1998 Mitsubishi Galant

2 Answers

Where is the turn signal flasher relay?


If you have the owner's manual there will be a fuse box diagram and it should include all relays. If not you can purchase a Haynes manual that will also include the diagrams. Most likely the flasher is in the high amp fuse box under the hood and there is usually a diagram on the cover or in the fuse box itself.

Feb 14, 2011 | 1996 GMC Jimmy

3 Answers

Looking for fuse box on 1998 ford windstar


Fuse panel is located behind the instrument panel to the left of the steering column. There is also a fuse panel located on the left side of the engine compartment. Fuses #25 and #27 on the interior fuse panel are both associated with the turn signals.
I hope this helps you!

Apr 10, 2010 | 1998 Ford Windstar

4 Answers

Replace flasher relay on '04 Lincoln Aviator (Ford Explorer)


Check this fuse diagram for remove the FLASHER Relay...

4e4fb80.gif

This and other details you can find in the 2004 Lincoln Aviator - Owners Manual.

Hope this help to solve your problem (remember rated and comment this) Have a nice day.

Mar 31, 2010 | 2004 Lincoln Aviator

2 Answers

My turn signals stopped working, I assume maybe a blown fuse. I looked for that fuse under hood but its not there. I looked at the fuse panel under the driver side dash but the fuse box cover is gone, and...


your flasher fuse is generally a round, or rectangular metal fuse.It should be in the fuse panel under the dash.If you look closely at the back of the fuse,sometimes they are stamped. You may be able to obtain a diagram of your fuse panel from your owners manual,check the index,or appendix in it.If you still have problems after replacing the flasher fuse,you may have a bad signal switch in the collum.Also try your hazards.On my truck the hazard signal sometimes does not fully engage,although the hazards stop flashing the turn signals wont work.more than likely,if the flasher fuse is blown,your hazards wont flash either. the lights for the signal should appear on your instrument panel and stay on steady,and not flash. good luck

Feb 14, 2010 | 1996 Honda Accord

1 Answer

Turn signals wont flash


;ook in the fuse panel diagram and find the flasher fuse if it is of replace the flasher that is the fuse panel also

Jun 26, 2009 | 1983 Cadillac DeVille

Not finding what you are looking for?
1998 Jeep Cherokee Logo

939 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...