Question about 1991 Toyota Pickup

1 Answer

My 4x4 toyota pick-up was stored for two years without running now my clutch stuck at the end i start my engine when it is engaged in first gear and it run ,i try to push on the clutch or change gear a couple of time and nothing work,the master cylinder is full of oil all my gear work but i have to shut down the vehicule to engage any gear please help me

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 6,982 Answers

Clutch system works exactly like hydraulic brake system. Check everything for leaks, make sure slave has not rusted and frozen in place and check that master cylinder is not bypassing internally. It's a good idea to bleed it out as well...fluid is hygroscopic and likely has drawn in water from the air over time (not good for system) That applies to brakes as well.

Posted on Jul 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 Toyota 4x4 truck. Why doesn't it roll when I let the clutch out?


When you "let the clutch out" I'm assuming that you are removing your foot from the clutch pedal. That essentially connects the transmission to the engine.
The vehicle will not roll for several possible reasons:
1) The transmission is in gear and the engine is not running.
2) The parking brake is ON.
3) The brake pedal is depressed.
4) The brake shoes (or pads) are stuck or rusted to the drums or rotors.
5) It is still sitting on blocks
6) It has 4 flat tires
7) It is stuck in a mud bog

Apr 05, 2016 | Toyota Cars & Trucks

1 Answer

1995 Toyota Tacoma 3.4L 5-speed manual feels like 4x4 is not fully engaging.


check that the clutch is fully engaging by checking if there is free play at the throw out lever and clutch push rod . If you cannot push the rod back into the cylinder then the slipping is because the clutch is only partially engaged. Replace the clutch master cylinder if that is the case. If it is right then the fault will be in the pressure plat/ cutch plate and it may require a clutch kit.

Feb 05, 2014 | Cars & Trucks

2 Answers

I have a 93 Toyota pick up 4x4 standard transmission. Sometimes when I go to reverse, there is a grinding noise, which won't let me shift into reverse. I then need to turn off the vehicle, then engage....


Could be the clutch.
Reverse and first do not have gears that line up like the others do. So if the clutch is not disengaging all the way, they will grind.

Dec 13, 2012 | Cars & Trucks

1 Answer

92 Toyota Pick up clutch doesnt enagage after replacing clutch, and flywheel?


are you sure the driven plate is on the correct side? The clutch bearing is correct on high? Does the slave or master cylinder works ok? do they keep steady pressure when needed? Is the clutch kit the correct part according to engine type?

Nov 12, 2012 | Cars & Trucks

1 Answer

Iam trying to figure out what the gear ratio in my rear end of my 92 toyota 4x4 4cyl pick


i have 92 toyota pickup with 4cyl running 36's with 5.29 gears pulls them just fine

Jul 29, 2012 | 1992 Toyota Pickup

1 Answer

I can put my 1994 toyota tercel in gear without pushing in the clutch, what could the problems be?


Do you mean with the engine off? If so, that is normal. The clutch just allows you to disconnect from engine when it running. With the clutch released and engine running the gears are spinning all the time. When in neutral, the chain of gears to the final drive is incomplete. When you engage a gear you are completing a chain of gear connections to the wheels. If engine is running, you will grind gears untill you press clutch, making a temporary break in the chain, allowing the gears to stop spinning and you to engage one.

You can infact use 1st gear as a kind of parking brake as it holds the car from rolling (in most cases) , with engine OFF, - BUT this is not advised as the only parking brake.

Jan 10, 2011 | Toyota Tercel Cars & Trucks

1 Answer

I have a 1988 4X4 pick up 4 cylinder. When i start to pull a hill the rpms go up and you can hear the engine revving up but the truch won't pick up speed. I thought the clutch might be slipping but I can...


I would suspect the pressure plate and clutch need replacing. Your truck is 22 years old and if it has never had the clutch replaced you can almost bet it needs a new clutch and pressure plate. It slips in 4th & 5th gear due to the fact the the ratio is high and it takes more pressure to hold the clutch in place.

Aug 16, 2010 | 1988 Toyota Pickup

1 Answer

I have a Toyota Corolla AE 100 manual gear shift gets stuck


why my 2006 corolla car gearbox is stuck in third gear and cannot move

May 29, 2010 | 1991 Toyota Corolla

1 Answer

I own a toyota 4x4 pick-up 1989 it was stored outside without running for 2 years ,now my pedal clutch stay stick.How can i fix it? Also how can i put oil in the gearbox(transmission)?


I assume the clutch won't release. Put the trans in neutral and start the engine. Let it get warm. MAKE SURE THERE IS ROOM TO DRIVE THE TRUCK, WITH NOTHING IN THE WAY. Stop the engine, put the trans in first, and start the engine. The truck will jump forward when the engine starts. Get it on a clear road, push the clutch pedal in, and hit the gas. It should come loose in one or two tries.

Jul 14, 2009 | 1991 Toyota Pickup

3 Answers

Hello, 1986 Toyota 4X4 Truck 22R carb engine manual transmission. My son was driving it and the rear wheels locked up. Driving in 2 High mode. He got the truck pulled over to the side of the road using 4X4...


I've seen a similar issue on other transmissions where the shifter slips out of the slots in the shift forks, either due to shifter bushing wear or just general wear on tte trans. It can usually be remedied at least temporarily by popping the shifter top off the trans and resetting the forks all back to nuetral and then reinserting the shifter. It gets jammed when two forks are trying to engage two different gear sets.
On one of the 4x4 sites, they tell you how to replace the shifter bushings, cheap fix if you are lucky.
Good luck.

Dec 09, 2008 | 1986 Toyota Pickup 4WD

Not finding what you are looking for?
1991 Toyota Pickup Logo

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...