Question about 1999 Isuzu Trooper

2 Answers

2000 isuzu trooper 3ltr flywheel broke fitted new one at 6oclock position turned engine before fitting clutch and gearbox it started.then fitted clutch and gearbox won,t start. help

Posted by on

  • mdunne999 Jul 15, 2009

    yes flywheel fitted properly but engine will not start

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

Is it turning over now? Is it turning over fast enough? Sometimes when you do this, it needs extra power to turn over fast enough. Try hooking up another car like you are going to jump start it and see if it then starts. With the added resistance, it may just need an extra boost on the first time.



Benjamin

Posted on Jul 15, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,124 Answers

Notsure what you mean by "wont start" now.. Is the motor turning over ? Is the flywheel working properly ?

Posted on Jul 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Isuzu trooper 2004 model 4jx1 engine what was the fly wheel marks if it was at tdc


if flywheel is fitted in correct position the timing mark on the front top cambelt gear is at 12 O clock and with starter motor removed you will see 3 lines stamped in the interuptor ring that is bolted to the rear of the flywheel if manual on early builds, also there is a notch in flywheel which you can see if gearbox is out this goes at 6 O clock
25312290-55d4lqh0wtq3cergg12nnjcv-3-0.jpg

Dec 07, 2014 | Isuzu Cars & Trucks

1 Answer

POOR ENGINE PERFORMANCE AFTER CLUTCH AND FLYWHEEL REPLACEMENT ON A 2006 NISSAN FRONTIER


This is a pure shot in the dark. I had a similar problem with an Isuzu Bighorn. The flywheel on my car could be replaced in any one of six positions, and it was replaced incorrectly. There is usually one bolt hole that is not quite in the same position as the others, or a dowel which makes it impossible to fit the flywheel incorrectly., but on the Isuzu there is a timing mark on the flywheel, and it can be fitted incorrectly.
If you've fitted a new flywheel, make sure it is for exactly your car - the timing slots which are picked up by the crank angle sensor could be wrong.
Just a shot in the dark . . .

Oct 08, 2014 | Nissan Pickup Cars & Trucks

1 Answer

GEARBOX 1995 USUZU MU 3.1 DIESEL


If the clutch is not disengaging when you put your foot on the clutch ( if the system has been bled correctly or cable fitted correctly ) then the problem is that the clutch plate is in the wrong way round and the clutch hub with the springs is hitting on the flywheel bolts

Jan 10, 2014 | Isuzu Pickup Cars & Trucks

1 Answer

My Isuzu Bighorn 4JX1 RJM Engine stalled after fitting it with new oil pump. It can crank but is emits smoke but not run. What could be the problem? I have tried to check if the fuel pump is not working...


the engine oil pumps are in the rear of the engine(trans out) and behind flexplate /flywheel, were any of these 2 engine oil pumps touched if so the flywheel /flexplate has to be timed to crankshaft position, so you might have it in the wrong position, if your talking about the diesel lift pump (injector pump) that also supplies high pressure engine oil to injectors, after replacing this there is a learn procedure for the rail pressure control valve that is on pump. this can only be done by dealer or some one with Tech2 scanner tool.

Jan 21, 2011 | 2000 Isuzu Trooper

3 Answers

Just had new clutch and flywheel fitted,now wont start,is there a specific place for timimg the flywheel


No timing of the flywheel to the starter. Flywheel does not affect ignition timing.

Mar 11, 2010 | 1999 Isuzu Trooper

1 Answer

How do i set flywheel timing on a 3ltr diesel isuzu trooper


#1 on TDC and the small cut out in the flywheel sits at 6o'clock.

Dec 16, 2009 | 2001 Isuzu Trooper

1 Answer

1998 Isuzu Bighorn 3.1 turbo diesel. Proceedure for replacing engine rear main seal.


Drop the gearbox down and out, take off the flywheel and you can see the seal then , prise it out ,cut off the wearing if it has one, tap on the new wear ring ,fit the new seal and replace the gearbox .

You maybe gotta jack up the back of the box to get the top bolts out , depends how handy you are .

Nov 26, 2009 | 1998 Isuzu Trooper

1 Answer

Do 3.1 liter turbo diesel isuzu engines have a one way valve fitted to their turbo cooling hoses?


Can I fit a 3ltr turbo isuzu engine to my 2000 model holden rodeo it is fitted with a 3.2 ltr V6 at the moment

Apr 29, 2009 | 1994 Isuzu Trooper

1 Answer

Isuzu trooper problem!with a 00 3 litre diesel engine not starting


Was it lined up right as the trigger point for the sensor is important.Is the fly wheel fitted one position only that the bolt holes line up or will it fit no matter which position it bolts up Line up the flywheel trigger with the sensor after you have put the engine to Top Dead Centre.Put at tdc and see if the trigger and sensor are together.

Oct 18, 2008 | 2000 Isuzu Trooper

3 Answers

Fitting 3.1ltr diesel engine to Isuzu Trooper


Yes this is no prob, best get complete 3.1l jeep to do just finished one and it is perfect.

Oct 09, 2008 | 2000 Isuzu Trooper

Not finding what you are looking for?
1999 Isuzu Trooper Logo

Related Topics:

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...