Question about 1993 Chevrolet Suburban
Idle Air Control Valve most likely.
Posted on Jul 14, 2009
Low / uneven idle problem can cause by a lot of components.
Dirty air filter
Dirty injectors + o-rings
Vacuum leak at intake manifold and vacuum hose.
Bad Idle Air Control Motor (IAC)
Low compression (170 psi + is OK)
Start cleaning and repair these trouble spots and see is there any improvement.
For more advance DIY'er then you may try this.
Use a can of Berryman carburetor clean to locate the vacuum leak.
SEE SAMPLE PICTURE HERE
This is a 20-30 minutes job.
Vacuum leaks can occur in following locations.
Intake manifold AND/OR vacuum lines.
Intake manifold is not accessible unless the engine head if off.
You can still check the potential leak by spraying some Berryman near the intake manifold.
Listen for rpm increase after you introduce the Berryman (FUEL) at idle.
Do the same starting from the brake booster unit (the round unit) on the drive side fire all.
Carefully listen for increase of RPM right after to spray the Berryman to the potential vacuum spot.
Get a friend to HEAR the ROM increase or monitor for RPM on the tech.
DO NOT AIM the Berryman into any heat source.
PLEASE RATE my answer if it is useful to you.
Posted on Dec 14, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jul 22, 2008 | 2003 Toyota 4Runner
Jan 03, 2014 | 2004 Ford Taurus
Nov 13, 2013 | Cars & Trucks
Feb 18, 2013 | Cars & Trucks
Oct 27, 2010 | 1997 Nissan Maxima
Sep 08, 2009 | 1994 Chevrolet S-10 Blazer
Jun 28, 2009 | 1999 Mercury Cougar
Jun 22, 2009 | 2001 Mitsubishi Eclipse
Mar 15, 2009 | 2000 Ford Expedition
195 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: