Question about 2003 Chrysler PT Cruiser

2 Answers

Where is the map sencer located - 2003 Chrysler PT Cruiser

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 321 Answers

To install:

  1. Make sure that the manifold is clean.
  2. Install sensor to manifold.
  3. Tighten screws.
  4. Connect the electrical connector to the sensor.
  5. Connect the negative battery cable
  6. Install the air cleaner cover.

    where is the map sencer located - 0900c15280225b0f.jpg enlarge_icon.gif Fig.



http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?partName=Manifold+Absolute+Pressure++MAP++Sensor&pageId=0900c15280225b0e&partId=0900c15280225b0e#hd1-1-2

Posted on Jul 14, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 94 Answers

Hi, around the air box area but of course it depend on what type of car it is.
George.

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 94 gmc suburban and I removed the catalytic converter but now the check engine light stays on why is that


the engine is controlled by a computer, the computer is now getting bad readings from the O2 sensor, some are located in the cat, or just before it. wich will also efect the egr valve and posably the map sencer

May 06, 2014 | Cars & Trucks

1 Answer

Plugs, destributer, destibuter cap,wires, map sensor replaced. still not running right


check the raideator temp sencer and massflow sencer get a diagnosticreading done and work from that

Jan 24, 2013 | 1994 Cadillac DeVille

1 Answer

2000 silverado 1500 4.8 bank 1 and bank 2 to lean how can i fix


I have a 2001 Silverado 1500 with the 4.8 that had the same error codes. It turned out to be intake manifold gaskets were bad. With the engine running spray some carb cleaner on the intake where it bolts up to the heads and listen for the engine to speed up. If it does you've got a leak. With mine I couldn't find the leak with the carb cleaner but after I replaced the gaskets the problem was solved. Hope this helps.

Jan 18, 2012 | 2000 Chevrolet Silverado 1500

1 Answer

Were is the map sencer located on a 1991 honda accord?


The map sensor is located on the passenger side fire wall

Dec 24, 2011 | 1991 Honda Accord

1 Answer

I have a 94 chevy lumina it idles high in park and when i put it in gear it stalls i have replaced (one of the o2 sencers, egr vaule, map sencer, trottle sencer, and another sencer but not sure what it is....


throttle position sensor can cause the high idle as will a hole in the egr valve tube as far as stalling as soon as u put in to gear could be torque converter not unlocking but id check the egr tube first

Jun 07, 2011 | Chevrolet Chevy Cars & Trucks

2 Answers

Where ist he maf sencer located on a 94 firebird 3.4l v6, i cant find any good info on google, like a pic or something?


I'm pretty sure the MAF is sandwiched between the Air Filter Box and the intake tube. Should be 4 screws.

zeevert_31.jpg

Jan 06, 2011 | Pontiac Firebird Cars & Trucks

2 Answers

Ware is the map sencer located


At the passenger side end of the upper intake. Between the coil pack and the alternator.

Nov 17, 2010 | 1998 Buick Park Avenue

1 Answer

Runs rough too rich replaced oxy. sencer &temp. sencer.1987 suburban 350 .thinking about changing maps sencer next


That may help. Also check for fouled plugs. Also check the fuel pressure regulator on fuel rail, check for vacuum at the regulator.

Mar 06, 2010 | 1987 Chevrolet Suburban

1 Answer

Car wants to stall changed injecter,egr valve iac


hi
check the all vacuum pipes is their any leaks.

Feb 21, 2010 | 1994 Saturn Sl

Not finding what you are looking for?
2003 Chrysler PT Cruiser Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...