Question about 2008 Mazda B Series Pickup

1 Answer

After running the engine for about 10 minutes it turns off,i want to know what is the problem. my car is mazda B2200 1993.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 583 Answers

Sounds like the ignition control module is not getting required pressure.or the spark plug wire is getting overheated and leaving it crossed.after some time it again gets cool and starts.this continues.check spark plug also. Two reasons why the engine would quit running after a few minutes: it dies from flooding or it dies from starvation. Starvation may be due to a clogged fuel filter or the needle valve is too much to the closed position. Flooding may be due to the needle valve being too much in the open position or the float being stuck in the open position. this will help. thanks.please do rate the solution.thank you for using fixya.keep updated.

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A/c not cooling compressor need oil but dont know what brand and how much to put in


run the engine at fast idle run the ac in maximum cooling and after a few minutes check the sight glass if bubbles present in the sight glass there is insufficient amount of refrigerant you'll need to recharge freon and about 10 ml of refrigerant oil PAG is best.

Mar 09, 2014 | 1990 Mazda Protege

1 Answer

1993 RX7 - cooling fan always comes on when engine is shut off.


I would want to know if the computer is grounding the fan relay to make it come on, or if the relay is faulty. On some models the computer turns the fan on to keep the radiator from overheating when the engine is stopped, but that should only happen with the engine at operating temp.

Sep 28, 2012 | 1993 Mazda RX-7

1 Answer

How to rekey a pontiac sunfire 2004


Im assuming you are refering to the anti theft security key relearn process.

1. Perform a security system relearn.
2. Let the vehicle sit for more than 10 minutes with the key off.
3. Attempt to start the engine, leave the key in the run position monitoring the security system indicator.
4. After 10 minutes, the security indicator will change state.
5. Turn the key off and wait 10 seconds.
6. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.
7. After the second 10 minute timer has expired, turn the key off for 10 seconds.
8. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.
9. After the 3rd 10 minute timer has expired, shut the key off for 10 seconds.
10. The security system will relearn on the 4th starting attempt and the engine should start and run.

If that doesnt work, look into this link http://vatspasslockpasskeysecurityhelp.yolasite.com/

Aug 07, 2011 | 2004 Pontiac Sunfire

1 Answer

How to reprogram key


1. Perform a security system relearn.

2. Let the vehicle sit for more than 10 minutes with the key off.

3. Attempt to start the engine, leave the key in the run position monitoring the security system indicator.

4. After 10 minutes, the security indicator will change state.

5. Turn the key off and wait 10 seconds.

6. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.

7. After the second 10 minute timer has expired, turn the key off for 10 seconds.

8. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.

9. After the 3rd 10 minute timer has expired, shut the key off for 10 seconds.

10. The security system will relearn on the 4th starting attempt and the engine should start and run.

If this doesnt work, and you are having STARTING issues, go to this link.

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Jul 29, 2011 | 2005 Pontiac Grand Prix

1 Answer

My MAzda 2003 MPV ES.The evap and EGR still incomplete, need reset on the monitor- drive test; everything else passed the smog. no codes show on scanner. FEw months ago, I chage the battery, but I was told...


Here is the procedure for allowing system to run each of the separate mode tests.
EGR : Start engine and warm up completely. Make sure all electrical loads are off (A/C headlights, blower fan, and rear window defroster) Accelerate to between 49-57 mph and hold a very steady speed for 1 minute. Decelerate to a stop and turn off engine.
EVAP : Ensure Baro pressure is 21.3 inHg or higher, Intake air temp is 41-95 'F, Fuel tank level is between 25-75%, Battery voltage is 10.9-14.6 volts. Start engine and idle for more than 10 seconds then turn key to off. Leave vehicle to sit for 5 hours or more. Start engine and race to 3500 rpm to warm up completely the idle for more than 15 minutes. Accelerate and then drive vehicle at very steady speed between 40-50 mph for more than 5 minutes. Stop vehicle and turn key to off. Leave vehicle undisturbed for 20 minutes or more.
When I say steady speed in the above, try to keep dead on to a set speed to help ensure the test is run. Especially for the EGR as this is when the test will be performed and if speed/rpm is not very steady then test will not be performed. The Evap test will be ran during that final 20 minute or more sitting period (or should be anyway).

May 20, 2011 | 2002 Mazda MPV

1 Answer

Charge light going out but not charging battery.


what is the voltage of the battery when running, voltage when turned off, voltage after headlights are on for 10 minutes. is the battery good? how do you know. these take a sealed gell cell battery.

Sep 18, 2009 | 2000 Mazda MX-5 Miata

1 Answer

1994 Mazda B4000 4WD V6. Check engine light on. Truck


if i remember right if the battery light and check engine light is on, your alternators may be bad. your battery may just have enough to keep it running for a minute or so. you can take it out and get it tested at a auto parts store. or try charging your battery for awhile and see if it stays on longer. if this is completely wrong let me know

Apr 08, 2009 | 2007 Mazda B4000

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...