Question about 1992 Dodge Dakota

2 Answers

Sputtering when accellerating . I have changed spark plugs and wires,put new distruber and rotor on and changed the heat-oxygen sensor at the manifold. cleaned the erg filters and checked for any vaccuume leakes. and still when i accellerate it has a sputtering. The higher the gear the more noticable.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,129 Answers

In adequete fuel pressure change the fuel filter, first depressurize the fuel line. run dry gas in the vehicle once a month. Check for OBD codes it may need a MAF sensor.

Posted on Jul 14, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 37 Answers

Have you checked the fuel filter

Posted on Jan 07, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1996 Taurus. When I press the gas pedal when cold it sputters, lack of power. Once it heats up it runs fine. code p0305


A code P0305 may mean that one or more of the following has happened: 1 Faulty spark plug or wire 2 Faulty coil (pack)3 Faulty oxygen sensor(s) 4 Faulty fuel injector 5 Burned exhaust valve 6 Faulty catalytic converter.
Possible Solutions If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back. If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.

Oct 21, 2014 | 1996 Ford Taurus

1 Answer

2001 chevy malibu idles anywhere from 1500-2500 rpm then sputters and dies while driving.


I'LL TRY, GOOD TO SEE SOMEONE TRY AT LEAST ! IDLE SEEMS HIGH, BACK TO BASICS !!!!!! THE AIR & FUEL FILTERS NEED REPLACED, SPARK PLUG WIRES, YOU FORGOT THEM !!! DISTRIBUTOR CAP & ROTOR, YOU FORGOT THEM !!! THESE ARE AS IMPORTANT AS THE AIR WE BREATHE !!!!! VACUUM LEAKS, CHECK ALL VACUMM LINES, THOROUGHLY ! THIS LINE COMING OUT OF THE TRANSAXLE PORTION OF THE INTAKE MANIFOLD ?????????????????/ YOUR NEED TO REPLACE WHATEVER IT IS, WHAT KIND OF LINE ? METAL, RUBBER , WIRE ??? MOVING ON, GOOD YOU REPLACED THE OXYGEN SENSOR, & IDLE AIR VALVE, & TPS, RECHECK TPS, IS IT LOOSE, ALSO TIGHTEN THROTTLEBODY BOLTS, THE ONES THAT HOLD IT DOWN. SO, CHANGE YOUR FILTERS,WIRES, ETC., MENTIONED ABOVE, CAP & ROTOR, ETC.,ETC.,.........GO FROM THERE, SEE HOW THAT WORKS

Mar 24, 2013 | 2003 Chevrolet Malibu

1 Answer

Sputtering t-100 pickup truck


Check spark plugs and plug wires.
Wires may be dirty-causes arcing under load.
O 2 sensors must be changed at 100,000 miles or sooner.
50 K is recommended.

Mar 02, 2013 | 1997 Toyota T100

1 Answer

I have a 1997 nissan quest xe and it runs pretty good in the morning when the motor is cold, but as soon as it warms up it starts to spit and sputter and sounds like it is fixing to die. We have changed...


When your engine is cold it runs in open loop, and bypasses the oxygen sensor. When warm it goes into closed loop, with the oxygen sensor controlling the fuel mixture. Replace the sensor.
murf427

Aug 04, 2012 | 1997 Nissan Quest

1 Answer

1990 mustang 5.0 runs ruff and spits and sputters and fluds out black smoke out exhaust .sometimes straightens out and runs good.what could be the problem?changed throtle positon sensor and still same


Hi,just to see if the spark is ok there is a light that fits inbetween the ht lead and spark plug so you can see if the spark fails why the car is running,hope this was some help.
you should be able to get one from your local car spare shop or on ebay,all the best hope you sort it.

Jul 20, 2017 | Cars & Trucks

3 Answers

Sputters and spits when running


you may have bad injectors and will have to have them replaced

Sep 09, 2009 | 1993 Ford Crown Victoria

2 Answers

Neon sputtering on take off


i had a problem like that for a while so what i did was i ran cold spark plugs (ngks r) and booch 8mm spark plug wires but try checking the injectors if thats not it replace the spark box that sits on the valve cover.
goodluck
later

Jun 06, 2008 | 2000 Dodge Neon

Not finding what you are looking for?
1992 Dodge Dakota Logo

Related Topics:

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...