SOURCE: Replacing head gasket on 1995 honda civic, require torque specs and secquence
wow. a lot of bad information on this site. Refer to a manual for the proper torque sequence. The civic I believe is a two step torque procedure. First 22 ft lbs, than 53 ft lbs.
SOURCE: head bolt torque specs for 200 honda accord 3.0
its a three step process 1st 29ft/lbs 2nd 51ft/lbs 3rd 72.3ft/lbs
SOURCE: hi what is the head torque on a 2002 honda civic
Dont forget to apply clean engine oil to the threads of each bolt for proper torquing. Then finger tighten. Then
SOURCE: need torque specs for bolts
Hello claudian1535,
Below is an image showing the torque sequence. The torque procedure is a three step process:
Step one torque all head bolts to 14 ft.lbs.
Step two torque all head bolt to 36 ft.lbs.
Step three torque all head bolts 49 ft.lbs.
I hope this helps.
Regards,
netvan
SOURCE: 99 Honda civic 1.6 engine
Tighten the cylinder head bolts to their final torque
specification in two steps. Use a crisscross sequence starting with the
bolts at the middle of the head and working toward the outer bolts.
Fig. Cylinder head bolt loosening sequence - 1.6L (B16A2) engines (click image for zoom)
Hope helps.
Help need torque spec for cylinder head bolts 1986 honda civic dx 1.5 pls...
6,192 views
Usually answered in minutes!
×