Question about 1997 Subaru Legacy

1 Answer

Clutch shudder and loose gears

I took my Nissan Almera Tino 1.8SE+ in to have the clutch replaced. When I got the vehicle back the gears felt very loose and there was a shudder whenever I pulled away in 1st gear. I took the vehicle back to the garage who said that there was nothing wrong with the clutch and that there was nothing that they could do!! Please help as it seems to be getting worse....

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,201 Answers

Who ever did the job has a right to fix it. They probably didn't want to deal with it and waste their time and money to remedy the problem. Call them, and tell them, that if they don't want to find the cause, that you will get a lawyer involved, that should put a fire under their butts. Keep your receipts for proof of what was done.

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of nissan almera tino crankshaft sensor


if you are under the car it should be on the firewall side. It is black piece or a light grey color.

Jan 08, 2016 | Nissan Cars & Trucks

1 Answer

We have a tino 1.8 petrol 2005 and it has gone from 34mpg to 22mpg any ideas please


The vehicle will make a great a pollution, and it is harm our environment. Try to change your vehicle. because of this, it may happen.

Feb 28, 2015 | 2005 Nissan Almera Tino

1 Answer

Clutch makes a screetching noise when pressed in and cannot find gears while driving


Gregory, your throw out clutch bearing is worn. You should just install a new clutch kit.

Apr 21, 2014 | 2004 Nissan Nissan almera tino

1 Answer

Nissan almera loose clutch pedal


It sounds like the hydraulic clutch is failing or the car just has a light clutch feel. I suggest you have a local shop push the clutch and see what they think.

Sep 07, 2012 | Nissan Cars & Trucks

1 Answer

Failed emissions test nissan tino


Mine just failed emissions test garage said its burning oil what is the soulution

Apr 19, 2012 | 2004 Nissan Nissan almera tino

1 Answer

Our 3 week old Fortuner 3.0 manual 2010 model has had 2 replacement clutches. The problem was eveident when we took delivery on the 19/7/2010. The vehicle shudders in first gear. Toyota is happy to just...


lol. That sounds unusual to me that they would change the clutch.But, I would ask them if the shudder in first gear is due to loose engine mounts or if when they changed the clutch, they used a new pressure plate and checked the flywheel for warpage?

Aug 10, 2010 | Toyota Passenger Cars & Trucks

2 Answers

Clutch shudder and loose gears


It sounds to me like the clutch is slipping or it was not properly adjusted. I would take it back and tell them to take it out for a drive around the block. If they still refuse to do anything about it, take it to another garage and get their opinion. Better yet, get a written estimate. Then take it back to the garage that put the clutch in and tell them either fix the problem for free or you are going to take it elsewhere to get it fixed and sue them in small claims court. I do know that when i replaced my clutch, you need to have about a 100 mile break in. But still, the gears should not be loose and it should shudder. If anything, a new clutch will grab hard with very little play untill it is broke in.

Jul 14, 2009 | 2001 Nissan Altima

Not finding what you are looking for?
1997 Subaru Legacy Logo

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...