Question about 2005 Dodge Ram 2500 Truck

1 Answer

Pulling front axle shafts on dodge

How do you get the drivers side axle shaft out on the front of a dodge 2500?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,615 Answers

They pull right out when you get the knuckle off. Hardest part is getting there. Be sure to test the ball joints before you remove the tires. You may need some replaced.

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace my inner axle on the passenger side of my 2002 Dodge Ram 4x4 4.7L. I lent my truck out and the C clip let go of the CV axle. The intermediate axle spline is stripped and I need to change...


Lift and support front end on suitable jack stands preferably on frame. Remove right front cv axle, stub shaft, and seal. You will need to pull the right front brake caliper assembly loose and place to the side. Then remove bolts from shock and upper control arm and hub nut to do this. Next, remove axle lock actuator on passenger side of front axle. Place a drain pan underneath front diff cover and remove cover and drain axle. In the center of differential there will be an 8 mm head bolt holding spider gear cross-shaft. Remove bolt and cross-shaft only! Push inner axle in until clip clears inside of passenger spider gear. Set clip aside and push/pull axle shaft straight out to passenger side.

Feb 09, 2015 | Dodge Cars & Trucks

1 Answer

Is there a c clip in the front driver side holding the half shaft in on a 05 ram 2500 diesel. Trying to replace universal!


There is a spring-type C-clip on the end of the CV housing spline shaft. Disengage the CV joint from the axle housing by using a pry bar between the CV joint and the axle housing. It can be pretty tough to get it to let go. I have found it helpful at times to place the end of a pry bar on the back of the CV housing (as good as I can) and smack it with a BIG hammer. Putting it back in is not nearly as hard.

Jul 09, 2011 | 2005 Dodge Ram 2500 Truck

1 Answer

I have a 2004 dodge ram 2500 4x4 . the front drive shaft has a ball kit in it . how do i replace this and how does it work?


If it is the tipical cvshaft you must replace the whole shaft if you have the old style straight axle you have to take the four wheel assembly apart remove the rotor assembly this means that in some Dodges you have to have the bearing unpressed and a new bearing installed when you change the universal joint in the wheel shaft good luck these are tuff to do

Feb 24, 2010 | 2004 Dodge Ram 2500

3 Answers

My front differential is leaking!


I cannot see it, but I am guessing that you need to replace your axle seal. To do this,you have to pull your CV shaft out. Remove the tire, remove the caliper from the top of the rotor. Using a hammer on the back, remove the rotor. Take off the spindle (axle) nut, separate the axle (CV shaft) from the hub. Replace seal. It should pop right out. Good luck!

Aug 05, 2009 | GMC Sierra 1500 Cars & Trucks

2 Answers

Replacing front drive axle universal joints.


remove front wheel brakes,rotors, axle nut,remove the four bolts on the bake side of your unit bearing using one of the 4 bolts removed from the unit bearing (also knowin as wheel bearing) go get a half dozen of the same bolt only 1 to 2 inchs longer theard them into the unit bearing from the back side and start beating. the unit bearing is a sob to get out but will come out with time once you get it out pull out your axle shaft replace the ujoint and reassemble anti seize everything as you re assemble it

Jul 09, 2009 | 2004 Dodge Ram 2500

1 Answer

1999 dodge cummins 2500 front axel seals


you need to pull off wheels,brakes, rotor /unit hub bearing, both axles and intermediate shaft, as well as the vac disconnec ton the front axle tube. if only the right side leaks then only then only pull the right axle and intermediate shaft and vac disco. it is a trick with a miller tool to replace the seal. the left side seal is inside the diff and the carrier has to come out to replace it. pete

Jun 09, 2009 | 2004 Dodge Ram 2500

2 Answers

How do I remove the front axle shafts in a 2003 Dodge 2500 4x4?


they just pop out. i get behind then and pop them out with a screw driver or small pry bar

Jun 04, 2009 | 2004 Dodge Ram 1500

1 Answer

Front axel/hub


the hub is seized into stering knuckle..you can try putting a socket or a small 1/2" drive extension between 1 ear of front axle shaft and axle housing and turning wheels all the way to whatever side you have socket in..this will push hub out of knuckle..try doing this both ways with engine running..keep axle nut on shaft

Apr 25, 2009 | 2006 Dodge Ram 2500

1 Answer

No 4wd in a 1998 dodge ram 2500 w/360


check behind the right side of the front axle and look for 2 vacuum lines to see if they are still connected. also check on driver side just infront of the transfer case and check the vacuum lines to see if they are still connected. usually the problem is the vacuum lines have become caught on something and disconnected themselves.

Mar 24, 2009 | 1998 Dodge Ram 2500 2WD

1 Answer

Grinding noise when in 4x4


check RF axle where it meets shaft coming out of front diff..cv axle splines and stub shaft splines may be stripped..have seen this before

Feb 21, 2009 | 2004 Dodge Ram 2500

Not finding what you are looking for?
Cars & Trucks Logo

485 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...