Question about 1993 Toyota Corolla

2 Answers

Need to replace the shift solenoid. where is it located?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,129 Answers

Drain trans. fluid remove the trans. pan to expose the shift solenoids next to the valve body call the dealer to identify which solenoid is the primary and secondary sometimes there is only one but if you see two identify which one to replace.

Posted on Jul 14, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 75,822 Answers

Inside the transmission.

Posted on Jul 14, 2009

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 142 Answers

SOURCE: What does code P0753 Shift Solenoid mean?

P0753 means your powertrain computer detects a continuous open, short to ground or short to power in the circuit to your transmission's 1-2 shift solenoid. When the code is active, your transmission runs in a fail safe/limp home mode that only lets certain gear ratios function in the transmission.

The solenoid in your application looks like this
1edc2e6.jpg and it is located sometimes on the side of the transmission, but my guess is from the looks of it, it might be found inside the transmission, only accessible with the oil pan removed.
The problem might be the solenoid itself, or the wiring going to the solenoid from the computer that controls the transmission, or the computer itself.

Posted on Sep 09, 2009

alicantecoli
  • 22156 Answers

SOURCE: shift solenoid

sorry only manuals sold in spain,havent a clue

Posted on Dec 12, 2008

  • 507 Answers

SOURCE: need to replace the shift solenoid on a 1996

depends on which solenoid and its located on the valve body,have to remove trans pan to get to it,price depends where you buy it from eg;dealer or parts outlet,usually $100_$180 may be cheaper

Posted on Oct 21, 2009

  • 7353 Answers

SOURCE: need to know where the 2-3 shift solenoid is and how to replace

Its in the pan, it will have a RED and YELLOW wire to it. I believe its on the side of the trans. under the side pan,

Posted on Nov 19, 2009

  • 4044 Answers

SOURCE: how to install shift solenoid 2003 monte carlo

I have no information on transmissions. Sorry. Another expert should be able to answer your question.

Posted on Nov 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is location of shift solenoid a located on 05 cobalt?


The shift solenoid valves are two identical, electronic exhaust valves that control upshifts and downshifts in all forward gear ranges. These valves are normally open. These shift solenoid valves work together in a combination of ON and OFF sequences in order to control the positions of the 1-2, 2-3, and 3-4 shift valve trains. The TCM monitors numerous inputs to determine the appropriate solenoid state combination and transmission gear for the vehicle operating conditions.
Remove the transmission side cover. Refer to Control Valve Body Cover Replacement . Remove the 1-2 shift solenoid retainer clip (304), the 1-2 shift solenoid (305) with O-ring (303), the 1-2 shift valve (302), and the 1-2 shift valve spring (301).
Remove the PNP switch. Refer to Park/Neutral Position Switch Replacement . Remove the transmission upper side cover bolts. Install the engine support fixture. Refer to Engine Support Fixture in Engine Mechanical. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information. Remove the left front tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels. Remove the left inner fender liner. Refer to Front Fender Liner Replacement in Body Front End. Remove the wheel drive shaft from the transmission. Refer to Wheel Drive Shaft Replacement in Wheel Drive Shafts. Remove the power steering gear mounting bolts. Refer to Steering Gear Replacement in Power Steering. Remove the frame. Refer to Frame Replacement in Frame and Underbody.
This is a tough repair an needs special tools to do it . your best bet is take it to AAMCO

Dec 04, 2015 | 2005 Chevrolet Cobalt

1 Answer

Location of shift solenoid


If your talking about the shift solenoids in the transmission, they are located on the valve body and will require removal of the transmission cover. If your talking about the BTSI (brake transmission shift interlock solenoid this is located on the shifter module.

Apr 07, 2014 | 2000 Chevrolet Malibu

1 Answer

I'm replacing the shift solenoid in my 2004 Buick Rendezvous but I can't find any diagrams showing the location or how to change it out. Can you please help?


WHen you refer to the shift solenoid, are you meaning the solenoid that locks and unlocks the shift lever? If so, before you change this, check if your brake lights are working! A common fault for this solenoid to not work is either a blown fuse or failed brake light switch- the solenoid is activated by you pushing the brake pedal which sends its signal from the switch!

I hope this helps? Good luck!

Nov 11, 2013 | 2004 Buick Rendezvous

1 Answer

Where is the overdrive solenoid located on my 2001 Buick park avenue? I have the transmission pan off , can i put that back on and still put the solenoid? i would like a diagram of where it is located


You will need to pull off the side pan cover thats where the overdrive solenoid is located, lets see if i can get you a diagram to help you loacte it.i will tell you that there are two shift solenoid to control the gears and overdrive, there have been problems with jerking in overdrive this is due to the tcc solenoid and wiring harness and also the computer must be reflashed, dealer has update shifting and thats a must, i would replace that as far as the overdrive solenoid here are diagrams. the computer uses the shift solenoid with the pressure solenoid to control the overdrive i have circled the solenoid to replace , as theres not just one to control overdrive i have listed the one that control it .hope this helps.johnjohn2_161.gifjohnjohn2_162.gifjohnjohn2_163.gif

Sep 24, 2011 | 2001 Buick Park Avenue

2 Answers

Shifter is stuck in park. had to remove little cover over hole, by the shifter, to insert key into hole, to get shifter to remove shifter from park. what causes this and is it something i can fix on my...


I believe this vehicle is equipped with a shift lock that necessitates depressing the brake pedal before it can be shifted out of "Park". This is a safety feature designed into almost every car made nowadays to prevent unintended movement of the vehicle when shifting out of "Park". The Shift Lock solenoid is triggered by the brake light switch located near the top of the brake pedal arm. Starting with the "basics", check to see if the brake lights are working (they should illuminate when the brake pedal is pressed. If the brakes lights do not come on. then proceed to check the brake/stop light fuse. Replace if needed. Once the brake lights are functioning, the shift lock should "disengage" and allow you to shift out of "Park" when the brake pedal is pressed. If the fuses are okay, but still no brake lights, then the Brake Light Switch may need to be replaced.

Brake lights working but won't shift out of "Park"? Check for a separate fuse for the Shift Lock Solenoid. Replace if needed. Otherwise the Shift Lock Solenoid may need to be replaced. This will require disassembly of the console to access the part.

Apr 09, 2011 | Kia Optima Cars & Trucks

1 Answer

I need to know where the shift solenoid is located on 1999 Ford 150.


SHIFT SOLENOID INSIDE TRANSMISSION ON THE VALVE BODY.YOU NEED A REPAIR MANUAL WITH SAME TRANSMISSION IN VECHICLE TO LOCATE SHIFT SOLENOID SINCE YOU HAVE OTHER SHIFT SOLENOIDS.

Aug 07, 2010 | Ford F-150 Cars & Trucks

2 Answers

2002 Kia Sedona XL suddenly downshifts


What was the codes exactly that Auto Zone gave you.??? it might just be a simple wire harness that may have gone loose since you did some work on the speed sensor.
Here are the trouble codes for your car.  Good Luck and get the car scanned again for a more define information.

P0751 Shift Solenoid A Performance or Stuck Off

P0752 Shift Solenoid A Stuck On

P0753 Shift Solenoid A Electrical

P0754 Shift Solenoid A Intermittent

P0755 Shift Solenoid B Malfunction

P0756 Shift Solenoid B Performance or Stuck Off

P0757 Shift Solenoid B Stuck On

P0758 Shift Solenoid B Electrical

P0759 Shift Solenoid B Intermittent

P0760 Shift Solenoid C Malfunction

P0761 Shift Solenoid C Performance or Stuck Off

P0762 Shift Solenoid C Stuck On

P0763 Shift Solenoid C Electrical

P0764 Shift Solenoid C Intermittent

P0765 Shift Solenoid D Malfunction

P0766 Shift Solenoid D Performance or Stuck Off

P0767 Shift Solenoid D Stuck On

P0768 Shift Solenoid D Electrical

P0769 Shift Solenoid D Intermittent

P0770 Shift Solenoid E Malfunction

P0771 Shift Solenoid E Performance or Stuck Off

P0772 Shift Solenoid E Stuck On

P0773 Shift Solenoid E Electrical

P0774 Shift Solenoid E Intermittent

P0780 Shift Malfunction




May 05, 2009 | 2002 Kia Sedona

2 Answers

Shift solenoid relay.. internal or external?


Trans model is the 4L60E,and the shift solenoids are mounted on the valve body,just inside the bottom pan.There are 2 shift solenoids,one EPC solenoid (Electronic Pressure Control)One TCC PWM solenoid (Torque Convertor Clutch,Pulse Width Modulated),one 3-2 kickdown solenoid,and a manifold pressure switch.As far as a shift solenoid relay switch,i have never heard of that.The power for the transmission solenoids comes through the ignition switch ,and uses a fuse,not a relay.Accessing the solenoids only requires dropping the bottom pan,and the valve body does not have to be removed,to change the solenoids.The shift solenoids are the TWO solenoids right side by side and look identical..They are the only two solenoids inside the pan that are in fact identical.Good luck.

Sep 28, 2008 | 1996 Oldsmobile Bravada

3 Answers

Code0755 shift solenoid b after about ten miles next day whilst driving in fourth transmission goes into second


If you were to take the solenoid pack apart you would find a bad connection on that solenoid. You sill need a new pack installed.

Aug 11, 2008 | 1993 Chrysler Town & Country

Not finding what you are looking for?
1993 Toyota Corolla Logo

1,425 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...