Question about 2000 Chevrolet Monte Carlo

1 Answer

Want to know how hard it is to install power steering pump on 2000 monte carlo ss 3.4 v-6

Posted by on

  • mightyroofer Jul 16, 2009

    that doesnt tell me aloT.I KNEW THERE WAS 4 BOLTS BUT HAVE HEARD ITS A PAIN BECAUSE OF WHERE IT SITS ON THAT MOTOR.WANTED TO KNOW IF YOU HAD 2 RAISE CAR UP FOR EASIER ACCESS OR HOW WOULD BE A GREAT WAY 2 GET OLD 1 OUT AND NEW 1 IN

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 297 Answers

It is a skill level 6 to take this out. it is only two hoses and 4 bolts.

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Monte carlo 2000 power steering hard going to right


Take it to a front end shop and have it checked out. Could be any number of things which, if you are asking this question here, you probably are not equipped to fix by yourself.

Dec 20, 2014 | 2000 Chevrolet Monte Carlo

1 Answer

How do i replace oil pump on 01 monte carlo ss


If the oil pan will clear the steering components without jacking up the engine then drop the pan and unbolt the oil pump. You'll need to get a new pan gasket for the oil pan too.

Sep 25, 2014 | 2001 Chevrolet Monte Carlo

1 Answer

How do i remove the tenioner and Power steering pully to access my water pump bolts? 2001 Monte Carlo SS 3.8L


You loosen the power steering pump ,not remove the pulley
Everything in the way ,unbolts if you have the right tools

Aug 21, 2011 | Chevrolet Monte Carlo Cars & Trucks

1 Answer

I have a 2000 Monte Carlo SS 3800 V6. It was driving fine last night and now the steering is tight it will barely turn. The power steering fluid isn't low. What could be the problem?


well if u mean its hard to turn then i would suspect its the power steering pump is bad just because its not low on fluid doesnt mean its not bad

Jan 22, 2011 | 2000 Chevrolet Monte Carlo

1 Answer

Need to replace high pressure power steering hose on 2004 Monte Carlo SS. Need tips to effectively do the job myself. Tools needed, tricks to make the job easier, what not to do...etc. Thank yiou so much...


Power Steering Line/Hose: Service and Repair
Pressure Hose
Power Steering Pressure Pipe/Hose Replacement (3.8L)
Removal Procedure
1. Place a drain pan under the vehicle.
2. Remove the accessory drive belt.
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Remove the tire and wheel assembly.
5. The power steering pressure hose is the lower hose at the power steering gear.
Remove the power steering pressure hose from the power steering gear.
6. Remove the power steering pressure hose from the power steering pump.
7. Remove the power steering pressure hose from the clamps on the power steering gear.
8. Remove the power steering pressure hose from the vehicle.
Installation Procedure
1. Install the power steering pressure hose to the vehicle.
2. Install the power steering pressure hose to the clamps on the power steering gear.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the power steering pressure hose to the power steering pump.
^ Tighten the fitting to 27 Nm (20 ft. lbs.).
4. Install the power steering pressure hose to the power steering gear.
^ Tighten the pressure hose fitting to 27 Nm (20 ft. lbs.).
5. Install the tire and wheel assembly.
6. Remove the drain pan from under the vehicle.
7. Lower the vehicle.
8. Install the accessory drive belt.
9. Fill the power steering system with power steering fluid.
10. Bleed the power steering system.
11. Inspect the power steering system for leaks.

00d203e.jpg

Sep 15, 2009 | 2004 Chevrolet Monte Carlo

1 Answer

2000 monte carlo how to replace water pump.last bolt


there should be holes in power steering pump pulley that when positioned correctly the bole should go through one of those holes, if not then you have to remove the pump

Apr 29, 2009 | 2004 Chevrolet Monte Carlo

1 Answer

Need to replace all belts on my chevy monte carlo ss with a 305 engine and air condition


if it is a v-belt set up the alternator power steering pump and maybe the ac can be loosened and they pivot to take the belt off

Mar 29, 2009 | 1984 Chevrolet Monte Carlo

2 Answers

My 2000 monte carlo ss with a 3800 engine tends to start and stall about six times befor running, I pulled 3 codes 0108, 0404, and 1404 from the the computer .


I believe the codes are emmission related. I would have the fuel pump pressure checked. The fuel filter and fuel pressure regulator seems to be the failrue. The restarting of the engine several times is making the system build up enough pressure to start running . I would take to a shop to have the fuel pressure checked.

Mar 15, 2009 | 2000 Chevrolet Monte Carlo

1 Answer

My 2000 Monte Carlo ss is making a high pitched whine


it could be your power steering pump or the pump in the trany

Feb 03, 2009 | 2000 Chevrolet Monte Carlo

1 Answer

Lost power steering on 2001 Monte Carlo SS


I don't know how much this will help but some common problems with loosing power steering is that your power steering pump is gone.your pump is about a foot below the alternator on the side of the firewall - hard to get to it under the hood without removing some items, I got some prices for you and a new pump couls cost anyware from $18 to $70. also the belt could have loosened up just enough that your power steering wont work. hope this helped.

Jan 11, 2009 | 2001 Chevrolet Monte Carlo

Not finding what you are looking for?
2000 Chevrolet Monte Carlo Logo

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...