Question about 2000 Daewoo Nubira

1 Answer

My nubira 2000 incident

Dear sirs

please be informed that i exposed to an incident with my car that's when i was going with my car at 50 km suddenly a car in front of my car stopped and fastly i used the brake to stop my car and fortunately i stopped before touching this car but unfortunately another car shocked my car from the rear and made some damage for the car back.
after that i heared some noise and roughness in my car, could my automatic transaxle or engine have been affected and is the effects of that incident on my car components.

your quick reply is highly appreciated

regards,

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,615 Answers

You need to bring this to a body shop. They can give you the best advise. You have damage we can't see. Everything you get from us is just a guess and i'm sure your allready doing that.

Posted on Jul 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need timeing belt diagram for 2000 dawoo nubria how to instill


CLICK HERE and HERE for timing belt information on the Nubria

blueextc3221_1.gif

Thanks for using FixYa

Aug 03, 2011 | 2000 Daewoo Nubira

1 Answer

Nubira 2000 model sticky clutch.


Regards Darryl, you have a leak try bleeding the system then lube the contact ball which you should of done when replacing the slave, also could have master going out happens all the time weakest point in the system is the first to go out.

Jul 01, 2009 | 2000 Daewoo Nubira

1 Answer

Nubira 2000 automatic transaxle fluid


can't shift out of park unless key is in emergency release. Is there possibly an electrical problem, problem with the transaxle...

Jun 06, 2009 | 2000 Daewoo Nubira

1 Answer

Nubira 2000 all engine air hoses positions


not many hoses to mix up did you get cam timming correct one tooth out can make difference any more than 3 teeth and it could bend valves
check for vacuum leaks depending on engine type look under inlet manifold at middle section to see if you have knocked one off

Jun 06, 2009 | 2000 Daewoo Nubira

1 Answer

Nubira 2000 user manual pdf manual (english)


try this link to manual even though its 2004 manual is basically same just they updated info and put all paper based books into electronic form.(this link works !!)

http://www.onlinefreeebooks.net/automotive-machinery-power-equipment-ebooks/daewoo/daewoo-nubira-lacetti-service-manual-my2004-transaxle-drive-axle-pdf.html

Jun 06, 2009 | 2000 Daewoo Nubira

1 Answer

Run over a cavity "deep excavation" with high speed


this needs a motor vehicle technician to lift vehicle and inspect the damage ,but it will not be cheap because i should imagine that the lower track control arm is damaged ,and the tyre is now running out of alignment which is caused by the above

May 28, 2009 | 2000 Daewoo Nubira

1 Answer

Need turn circle dimensions


curb to curb turning circle (mm): 5,304
Here is a link to all the other specs.
http://www.internetautoguide.com/car-specifications/09-int/2000/daewoo/nubira/index.html

Please rate this solution

Jan 16, 2009 | 2000 Daewoo Nubira

2 Answers

Coolant over flowing while driving, not overheating, 2000 deawoo


change cylinder head gakate and check cylinder head that not bend from heat.

Jan 16, 2009 | 2000 Daewoo Nubira

1 Answer

Replacing timing belt on daewoo nubira 2000 model


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.

If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/2000/make/daewoo/model/nubira/2000_daewoo_nubira_timing_belt_diagram_marks.htm

Dec 15, 2008 | 2000 Daewoo Nubira

Not finding what you are looking for?
2000 Daewoo Nubira Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...