Question about 2001 Ford Focus

2 Answers

2001 ford focus brakelights not working

The brake lights on my ford focus are not working neither are the turn signals. would replacing the brake light swith help or since the signals are not working could it be something else.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Ford Master
  • 3,433 Answers

First chk fuses, of course,
Second chk bulbs on both sides. Yes it has happened
Third check the condition of your turn signal control. If it binds or is sloppy. Have it evaluated. The brake and 4 way circuits run through the turn signal control.

Posted on Jul 14, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Check the fuses, and bulbs first, if not that, i might be the switch

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

One side of my back stop light does not work i have ford focus 2001


The brake and turn signal lamps are controlled by what Ford calls a multifunction switch [the blinker control on the column]. If the lamp works on turn signal but not on brake, it definitely is the multifunction switch. If neither work, it still could be the switch or a bad wire.
Rock Auto carries some quality replacement parts at reasonable prices.
sm605.jpg
RockAuto Parts Catalog

Feb 07, 2015 | 2001 Ford Focus

1 Answer

2001 ford focus left tail light not working... left brake light does


You should have the computer scanned for trouble codes for the warning light.
As for the tail light, I would check the socket with a test light or meter to see if the socket is getting power for that circuit. The brake-turn signal circuit of the bulb is different from the tail light circuit.

Sep 25, 2012 | 2001 Ford Focus

1 Answer

Rear brakelights and turn signals do not work


The turn signal and brake lights are controlled by the turn signal switch.
You did not mention parking lights so I will assume they work.

Could be a faulty turn signal switch or a wiring problem between the dash and the rear of the van.
Do the hazard flashers work on all four corners ?

Jun 27, 2012 | Ford Windstar Cars & Trucks

2 Answers

Left turn signal doesnt work and my brakelights


  1. Check the fuse make sure it is not busted and also use a designated amp only.
  2. Check the bulb and the wires also.

Mar 28, 2010 | 1997 Chevrolet Lumina

3 Answers

Rear blinkers and brake lights on 2001 ford focus not working


yes it sounds like the turn signal switch is defective, the brake lights go through that switch as well.

Sep 06, 2009 | 2000 Ford Focus

4 Answers

Brake light, Turn signal not working rear right 06' Focus


I have a 2000 ford focus no brake lights. with the brake lights the transmission would not go into drive .replaced the brake light switch checked fuse replaced turn signal switch with no results then i moved onto the wiper switch and replaced it as much to my supp rise it fixed the problems

Jul 26, 2009 | 2000 Ford Focus

1 Answer

Brake lights not working but centre mount is!!


the problem is most likely in the turn signal switch. the power for the left and right brake lights goes through the turn signal switch, but power for the center mount comes straight from the brake light switch. this allows the brake light to be turned of so the turn signal can operate as they use the same filimant in the bulb.

Jun 04, 2009 | 2000 Ford Focus

1 Answer

No brake lights on 2000 taurus


check the feed to your brakelight switch
using a long,long piece of #18 gauge wire connected to the + (positive) battery post/cable then to the brakelight switch press the brake pedal if the brakelights come on run a new supply wire to the brakelight switch

May 22, 2009 | 2000 Ford Taurus

1 Answer

1988 ford thunderbird brake lights and turn signals not working


When this happens the problem is most likely the multi-funtion switch aka turn signal switch. Check to see if the 3rd brakelight comes on when the brake pedal is pushed. If so replace the MFS. The 3rd brakelight in late 80's fords bypasses the turnsignal switch.

Dec 29, 2008 | 1988 Ford Thunderbird

1 Answer

Ford Focus ZX5...


Yes, did. It turned out to be a short in the wires that powered the center brake light. This short caused power to be refed back through the brakelight switch and through the GEM. Once this was fixed everything started working again, including the cruise control.

Sep 24, 2008 | 2000 Ford Focus

Not finding what you are looking for?
2001 Ford Focus Logo

448 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...