Question about 1994 Oldsmobile Cutlass Ciera

1 Answer

20A fuse for stop lites/emer. flasher blows. Still blows with harness to rear of car disconnected. Flashers work until brake pedal is pushed. Mechanical switch at brake pedal operates normally. Unable to follow wire under dashboard panel to find short.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,129 Answers

Check the price on the stop switch if it is reasonable replace because sometimes these switches can become faulty.

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1986 20 silverado suburban 454ci 3/4 ton all functions normal, repaired faulty wire to rear L brake light by removing fuses and disconnected connections for testing.upon re-connecting fuses and clips no...


I would bet bad flasher. Try swapping the flasher for the emergency lights with the turn signal light. GM's have two flashers and usually one is easy to get to and one not so easy. If there is a new flasher, give if a minute to try to operate. I use to sell auto parts and the first use of a flasher would take 30 seconds or so, something to do with manufacturing. Good luck.

Dec 26, 2014 | 1986 Chevrolet Suburban

1 Answer

2003 GRand Prix, the 3rd brake light works , replaced bulbs and fuse under brake pedal, brake lights still don't work, any ideas?


The button is stuck in? Which button? If it is the flasher button then I would think that is why the brake lights and the flashers don't work. If it is the button behind the brake pedal that is stuck in it should keep the brake lights on and that would stop the flashers from working. I need more clarification on which button you are talking about being stuck.

Oct 16, 2014 | 2003 Pontiac Grand Prix

1 Answer

No brake lights


There could be 2 switches on the brake pedal. The other thing to check is wiring harness on back of the vehicle.

Feb 17, 2014 | Dodge Stratus Cars & Trucks

3 Answers

1994 Chevy C1500 truck. No rear brake lights


Most likely this is a brake light switch issue. Replace switch.

If your emergency flashers don't work, all flasher bulbs are fine, but flashing too fast, then check and replace Hazard light switch.

Oct 29, 2012 | 1994 Chevrolet C1500

1 Answer

Brake lights and turn signal don't work???


turn on the emergency flashers(e-flashers)if they work check the bulbs at the same time.if this is good then check the fuses.you may have a problem with the turn signal flasher needing replacing.this is a different flasher than that of the e-flasher,looks the same but a different flasher.usually located on or around the fuse panel under the dash.the brake light problem could be a misadjusted switch or a bad switch.the switch is at the base of the brake pedal and has two wires to it.one wire will have power all the time and the other wire will only have power on it when the brake pedal is pushed.if not then the switch will need replacing.check for broken wires at the switch as these sometimes break causing a problem.

Feb 08, 2012 | 1996 Pontiac Sunfire

3 Answers

My brake lights are not working, the signal and 4 way flashers work but not the brake lights, what could be the issue? My suv is a 96 gmc jimmy sls 4 door, 4wd.


If both brake lights stopped working at the same time it could be the bulb even though the flashers work, but more than likely it is a fuse. Check your fuse panel in the dash and also the fuse box under the hood.

Sep 22, 2010 | GMC Jimmy Cars & Trucks

1 Answer

No brake lights or emergency flashers. Changed


Try adjusting the brake light switch on the brake pedal.

The flashers have a relay in the circuit, test it and see what you get . The flasher switch may be the culprit also. By pass the switch with a pair of jumper wires and see if flashers work.

Apr 24, 2010 | 1991 Jeep Cherokee Briarwood

1 Answer

No brake lights. Fuse good. flashers work


check power into & out of brake switch if good then start testing wire to back untill you find a spot where you lose power

Jul 11, 2009 | 1997 Dodge Dakota

4 Answers

95 ford explorer xlt, all the blinkers quit working after I had an oil change and new tires installed. We bought a blinker relay [for the hazard lights] but can not find where it is.


Just fixed my flashers today on my 95 explorer, All my lights worked but no turn signals or emer flashers. First make sure all lights are working. Next check the fuses on the left side of the dash, I believe # 10 & # 11, if all is good you can replace the flasher relay, which actually called a flasher unit, or just flasher, Note : that did'nt work for me, but it is located under the dash even with the stering column, it is a small yellow or green box, mine was attached by plastic clips, just twist back an forth till it comes off, now let it hang down , being carefull not to pull on the wires, and use a screw driver to disconnect the box, its not very easy, the New flasher unit will have 5 prongs and the old will probibly have 6 prongs, don't worry the small 6th one doesn't connect to anything anyway. just plug the new one in and put it back up under the dash. My Problem was simply the emer flasher button on top of the stering column it must have a loose connection, because all I did after all that was to lift it up with the key on and jiggle it then pushed it back down , I turned the turn signal on and nothing, then left the turn signal on and jiggled the emer flasher button again when it was down, and I had turn signals, no problem since, but remember to leave the button down!!

Dec 11, 2008 | 1995 Ford Explorer

Not finding what you are looking for?
1994 Oldsmobile Cutlass Ciera Logo

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...