Question about 1992 Jeep Wrangler
Drop your gas tank. a couple of screws and it slips off.
Posted on Jul 30, 2009
Pump is in the tank...check it carefully before removing it. relay and filter can also give you similar problems.
Posted on Jul 14, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1988 jeep wrangler no fuel
check your fuel pump relay and your ignition switch those numbers you gave for voltage are not right, please recheck that you have a ground and 12volts at the pump while cranking please rate -jeff
Posted on Sep 04, 2008
check foe fuel pump presure at fuel rail,,,if u have fuel pump presure check all fuses with a test light not buy sight,,could be deceviving ,look at and check to see if fuel pump relay is working if no fuel presure i,if u have presure in fuel rail ,replace the cranck shaft sensor
Posted on Jul 03, 2009
The auto shutdown relay in your vehicle is controlled by the computer. If the computer does not see a signal from the crank or cam sensor, it will turn off power to the relay which in turn shuts off power to the fuel and ignition system. Unlike those in many passenger vehicles, it's not connected to an impact sensor. (as jeeps are off road vehicles as well as being transportation, if they had an impact sensor, they would be prone to shutdown when traveling over rough off road terrain)
The fuses to the relay are affected by shorting or overload of any components they serve, or by a problem with the relay itself.
Posted on Nov 01, 2009
Tips for a great answer:
Feb 08, 2011 | 1992 Jeep Wrangler
Dec 21, 2009 | 1992 Jeep Wrangler
Jul 03, 2009 | 2000 Jeep Wrangler
Jun 15, 2009 | 1995 Jeep Wrangler
Aug 13, 2008 | 1992 Jeep Wrangler
186 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: