NO I don't but if you go to the FG Falcon section of the Ford Forum in the link below, and ask for help politely, then i'm sure one of the guys there will help you out.
fordforums com au
SOURCE: volvo 940 se turbo towbar fitting
are you wanting to install a trailer hitch behind the volvo to tow the van?
SOURCE: fitting a towbar
thank you very much for replying i solved my problem by getting an audi manual.
regards
denise
SOURCE: How to Remove the Rear Bumper - BA Fairmont/Falcon
Firstly, you need to remove the rear splash shields from within the rear wheel arches and also the tail lights. Then remove the scrivets from the lover edge of the bar. Next remove the scuff plate at the boot opening and fold the carpet back. There are four nuts which hold the bar on, undo these and then lift the sides of the bar up and pull out. The bar has large clips on the side which hold it in place.
SOURCE: fitting instructions for the towbar electics on a
Behind the left reversing light is a grommet that you can put the towbar wire through, and just behind this is a large black connector, this has all the wires for the towbar, unfortunately there are several wires of the same colour that do different things, best use a test lamp on each one as you connect them. The indicators are "self monitoring" so you do not need a buzzer or light on the dash to tell you that the trailer is working, when you indicate with the trailer connected the ticking sound of the indicators changes to a pinging sound.
SOURCE: Towbar Wiring Instructions Ford Focus
On the left inside the boot behind the carpet is a blue connector, this has all of the wires for the rear lights. if you use a test lamp you can identify which wires do what and connect as you go. Use a self tapping screw for earth.
341 views
Usually answered in minutes!
×