Question about 2005 Chevrolet Aveo

1 Answer

All of my break lights are out. I have replaced the bulbs, and checked the fuses, and still nothing.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chevrolet Master
  • 3,433 Answers

Check the switch that is actuated by the brake pedal arm under the dashboard. good luck

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

We changed the light bulb but the light will not come on is there a fuse box


Not enough info in question. What type of car, year, model???
Most cars do have a fuse box...check the user manual

Dec 03, 2014 | Cars & Trucks

1 Answer

Tail lights dont work, break lights do


Did you check the fuses all so in the engine compartment fuse block? If you did check for loose wires at the bulb sockets, Loose ground wire conecting to the body, A break in a wire, If that is not the cause there is a short in the wireing, That should be check out at a auto electric shop,

Nov 28, 2012 | 1995 Mercury Grand Marquis

2 Answers

No break lights ,tail lights on a 1999 suberban check the fuse and they are all good when i turn my lights on and put on the turn singal and press on the break they start blinking very fast when i thouch...


it sounds like a ground problem...sounds like the ground is trying to go through the bulbs to make connection....check all ground wires battery, engine and rear frame...

May 27, 2011 | 1999 GMC Suburban

1 Answer

Back break lights


Same problem have someone check the ECM and the turn signal assembly voltage. The ECM is located by fuse box under dash and turn signal assembly is in the steering wheel. But they can check the voltage on both before replacing. Good luck

Apr 14, 2010 | 1996 Mercury Mystique

1 Answer

Blinker and Hazard light fuses


maybe the blinker or flasher is defective or one the bulbs is defective or open

Aug 29, 2009 | 1993 Toyota T100

1 Answer

Fuse keeps blowing


Depending what amperage fuse was blown, ( agreeing with jtarin if you are dealing with the brake lights) Then you could have a possible short to Ground. Meaning that there is a break in the wire insulation allowing the bare wire contacting metal. This Break in the insulation is before the Load ( bulb, motor, etc) Allowing the fuse to blow.

Check wires for cracks and breaks. replace/repair as needed.

Jul 13, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

1996 Ford Ranger No Tail lights. I have brake lights, but no Tail. I changed the bulbs, checked the fuses, nothing.


If you happen to have a trailer wiring adapter plugged into the harness, remove it first and see if they start working. I've more than one of those mess up the rear lights. If you have the three-bulb tail lights, use a test light to see if there is power to the tail bulb sockets. If there isn't, replace that fuse just to be sure, then trace back the harness to find the break in the wiring.

May 04, 2009 | 1996 Ford Ranger SuperCab

1 Answer

1998 honda acord break lights dont work


check the fuses then check the flasher fuse if you need any more info go to collisionrepairadvice.com

Mar 02, 2009 | 1995 Honda Accord

1 Answer

Brake Lights


Braking sensor attached to the pedal or calipers ?

Suggest replacing, try google search the parts or check service manual.

Aug 10, 2008 | 1999 Toyota Camry Solara

Not finding what you are looking for?
2005 Chevrolet Aveo Logo

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...