Question about 1998 Dodge Caravan

1 Answer

Where is the throttlebody sensor on a 98 dodge caravan?

I've been told to replace throttlebody sensor, where is it and what does it look like? Also what years caravan's parts are interchangeable?

Posted by on

  • gunitjenny Jul 15, 2009

    Sorry it's a 3.3 liter engine...now I'm being told crankshaft sensor, cam sensor, today the van took a complete dump on my way home...couldn't pick up spped at all...

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 721 Answers

Well i need to know what engine it has & there's no such part called a throttle body sensor. There's a throttle postion sensor. As far as interchangable parts,you can try one from a '96.

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1990 Dodge Dakota/3.9/2wd and I believe that my choke stopped working. When it's cold I have to feather the gas pedal until it is at about 100 degrees before it'll idle on it's ow


replace the TPS ,@ throttlebody, throttle position sensor, either needs replaced, or the 2 bolts that hold it on came loose, sensor needs to be turned a little , to increase throttle, then retighten bolts. should also tighten the throttlebody bolts to intake manifold,

Feb 05, 2013 | 1990 Dodge Dakota

1 Answer

05' Grand Caravan, told that 2 of the rear bumper parking sensors need to be replaced. What is the proper term for these, as I can't find them anywhere, and how invasive to replace?


I wish I had good news but rarly does this sensor go out. unless someone rear ended you. in this case the bumper cover has to be removed.

Dec 20, 2011 | 2005 Dodge Grand Caravan

1 Answer

I have a 99 Caravan 3.8l that won't start. It will turn but doesn't start. I've changed plugs, wires, crank shaft positioning sensor, coil pack, and tcm still won't start. Now I'm told...


I had a caravan that would not start as well double check and make sure you have a spark at the plugs. I replaced everything I could think of as well and it turned out that the timing belt was broken if there is spark at the plug than you know you have a good timing belt I know this does not answer your question about the pcm serial numbers but I wanted to give you another thing to check before getting into the sensors.

Jul 23, 2011 | Dodge Caravan Cars & Trucks

1 Answer

1998 Caravan: where is the crank sensor located on the 98 carava...


The crank sensor is located on the top side of the transmission about 11:oo clock position

May 18, 2010 | 1998 Dodge Caravan

1 Answer

How to remove oil pressure sensor in 98 dodge caravan I am able yo unscrew it but unable to release the sensor to replace


To remove the electrical connector on oil pressure sensor, you must move the red secondary lock to the right. Then press down on connector to release it.

Jan 25, 2010 | 1998 Dodge Caravan

1 Answer

98 Dodge Caravan Oil Light/Alarm comes on Intermittently (High and Low RPM)? Any Ideas?


Remove, check and replace the Oil Pressure Sensor. It should be located adjacent (just left of) the oil filter.

Jan 02, 2010 | 1998 Dodge Grand Caravan

4 Answers

1996 dodge grand caravan transmission will not shift out of 1st gear, speedometer doesn't work either


Mounted on the trany is a speedometer sensor. The vehical will not up-shift it, sensor, is malfunctioning. The vehicles computer doesn't know that it is not going fast enough to change gears.

Dec 08, 2009 | 1996 Dodge Caravan

1 Answer

Transmission Removal and replacement instructions


I replaced the tranny in my 98 Grand Caravan Sport. It was time consuming but not terribly difficult. All of the sensors were on different jacks so it was easy to put the electrical parts back together. The flywheel was a pain though, the holes didn't quite match up but the person I bought the replacement tranny from told me to drill the hole out larger and it was fine. I would label every thing you can. Get a script for valum and take your time, thats what I did. It helped to have someone there to help me drop the tranny and lift the new tranny in. Hope this helps. I will keep an eye on this post in case there is something I can help with.

Feb 07, 2009 | 1998 Dodge Grand Caravan

2 Answers

98 dodge caravan


The 3.0 liter is a Mitsubishi design and is not a free wheeling engine or a non interference design, this does not mean the valves are bent, install the belt and then check for bent valves.

Sep 18, 2008 | 1998 Dodge Caravan

Not finding what you are looking for?
1998 Dodge Caravan Logo

Related Topics:

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...