Question about 1986 Ford F150 SuperCab

3 Answers

Location for fuel shut off switch for 1990 f 150

5.0 auto engine reg cab. no fuel going to engine.

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,201 Answers

My manual is showing, it's in the cab, driver side, up against the firewall, to the left of the brake pedal.To reset, push on button at the top of the switch.

Posted on Jul 14, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,124 Answers

Could be a fuse or the fuel pump is bad

Posted on Jul 14, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

Usually by driver or passenger foot just foreward of the door jamb. hole in plastics.

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 KIA Sorrento 2.4 were is the fuel pressure regulator located. put on adjustable fuel reg .need to disconnect stock one


fuel pressure regulators are normally located in the fuel manifold. They are either vacuum controlled or electronic controlled to maintain the right fuel pressure for engine requirements and to shut off the fuel pump when the ignition is turned off
If your manually adjusted unit will not do all that then you are asking for fault codes to appear and all sorts of problems to occur

Jan 18, 2016 | Kia Cars & Trucks

1 Answer

1989 f-250 inertia fuel shut-off switch switch location


This should be in the owner's manual. I found the below on autozone.com, their repair help location:
An inertia switch is used as a safety device in the fuel system. The inertia switch is located in the cab, generally under the dashboard on the right side. It is designed to open the fuel pump power circuit in the event of a collision. The switch is reset by pushing each of 2 buttons on the switch simultaneously (some models use switches with only one reset button). The inertia switch should not be reset until the fuel system has been inspected for damage or leaks.
When the ignition switch is ON , it turns the EEC power relay ON . The EEC power relay provides power to the powertrain control module (PCM) and the control side of the fuel pump relay. Power for the fuel pump(s) is supplied through a fuse link or high current fuse attached to the starter solenoid (battery side). From the fuse link or high current fuse, current flows through the fuel pump relay and inertia switch to the fuel pump(s). The fuel pump relay is controlled by the PCM.
When the ignition switch is turned ON , the fuel pump(s) will operate. If the ignition switch is not turned to the START position the PCM will shut the fuel pump(s) OFF after 1 second. The PCM will operate the fuel pump(s) operate the fuel pump(s) when the ignition switch is turn to START position to provide fuel while cranking.
After the engine starts, the PCM will continue to operate the fuel pump(s) unless the engine stops, drops below 120 rpm or the inertia switch is tripped.

Dec 28, 2013 | 1989 Ford F 250

1 Answer

2004 F150 shut off while driving. all lights work but engine will not turn over. fuel shut off switch will not reset. If fuel pump goes bad the motor should still turn over right? Should I replace switch?


Fuel Shut off won't be tripped, unless you
were in an accident, and it won't go bad

You obviously have the Battery,Starter Solenoid,
the Starter,all of which have to be tested,first

You go to get it turning over before you check
other issues if necessary

Mar 16, 2011 | 2002 Ford F150 Regular Cab

1 Answer

1999 f350 diesel engine shut down, turns over but


that fuse powers pcm fuel heater and some other things. when the fuse blows the pcm shuts down. causing it to not run. usually its the heater that is bad. it is located at the back driver side by the fuel pump. you can unplug it and see if it starts. if so you will need to replace the heater

Jan 06, 2010 | 2002 Ford F350 Super Duty DRW Reg. Cab

1 Answer

Location of a fuel-pump shut-off switch


look by the oil filter.....ask any auto repair shop...

Sep 20, 2009 | 1986 Ford Econoline

2 Answers

Power shut off on ford f350 after hitting bump


is the battery connected or did the bump disconnect it?

Aug 31, 2009 | 2002 Ford F350 Super Duty DRW Reg. Cab

1 Answer

2001 GMC Sonoma Ext cab 4.3l, quit while running


Pull plug wire and install a philips screwdriver into the plug wire get it 1/4 inch away from a good ground and crank the engine over, is there spark? if so check that you have fuel pressure buy renting a fuel pressure test kit from schucks or auto zone and turn the Key to run position with the gage hooked up, it should read 50 PSI turn key off and wait 20 seconds should still have 20 PSI of fuel pressure, if no fuel pressure check fuel pump relay, then check fuse to pump. if you have a bad relay and are not getting fuel then check the oil pressure switch to see if you have oil pressure at the switch if no pressure then the oil pressure safety switch has died and needs to be replaced and should stark after replacing. If you have fuel then check the timing to see if you slipped timing belt.

Jun 12, 2009 | 2001 GMC Sonoma Extended Cab

2 Answers

1988 mustang 5.0 efi flooding engine will not start fuel pump constantly running, fuel reg. replaced will actually fill and with fuel and only fire if pedal is to the floor?


Step one
Click the key forward BUT don't start the car listen for fuel pump to pressurize and shut off. But if the pump keeps running change the fuel pump relay switch under drivers seat. If its pressurizing and shuts off then its not your fuel pump. Fuel pressure at rail when idling is 30 psi.
Let me know what happens cause I know alot about Stangs had 2 5.0

Apr 21, 2009 | 1988 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...