Question about 2005 Chevrolet Impala

2 Answers

Chevy impala 2005, dog chewed off rear licence plate. Pulled out wires, do I have to take full bumper off to check damage. Blinker and lights seem to be working

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 335 Answers

That's some dog. You shouldn't need to remove bumper for repairs.

Posted on Jul 14, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 296 Answers

See if you can pull the wires out just a little and see if there is any bare wire showing. If you can pull any wire out then more than likely the dog couldnt eather.

Posted on Jul 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Plate light does not work, but lights are good and sockets seem good


check bulb the number plate light runs on the same circuit as the side lights so if they are working its got to be a bad earth on the plate light

Jan 24, 2016 | Cars & Trucks

1 Answer

How to replace turn signal blinker switch in 2005 Chevy impala


There is only one blinker '. If it works for a left turn there is something else wrong. Check the lamps and sockets. Could be a broken wire.
Turn on the emergency flashers and walk around the car to look at all of the lights that should flash.

Nov 04, 2014 | Cars & Trucks

1 Answer

My 2005 chevy tahoe 5.3 license plate light went out i replaced bulbs problem still there what is the fuse labeled for that circuit?


Check the brake bulb socket for short , clean replace bulbs , check connector to rear licence plate lights . Also trailer harness for short , all on same fuse circuit .

Jan 23, 2013 | 2000 Chevrolet Blazer

1 Answer

Can't find the fuse for the licence plate lights 9tag light).


In the right intrument panel junction box, it's the 15A REAR PARK LP fuse

Dec 09, 2012 | 2005 Chevrolet Impala

1 Answer

How do I change the bumper on a 2000 Blazer


Front or rear, I am guessing it is the rear as they tend to get the most abuse and or rust! Start by removing the plastic step guard on the top of the bumper (use a flat ply bar) you will see the four bolts (remove those) and directly inline with those from the underside you will see four more (remove those) your bumper is free, there is one wire connector to release (licence plate lights) and simple lift off the bumper.

Dec 08, 2010 | 2000 Chevrolet Blazer

1 Answer

My licence plate lights will not turn on. I replaced the bulbs and all of the corresponding fuses. What steps do you reccomend to take to find the problem and fix it?


the first thing is to check for power and ground at the socket and wirng before socket, you may have bad sockets, or the wiring under the rear going to lights is bad, maybe a bad ground, the ground wire is grounded at the rear before the bumper,start ther check for power and ground.

May 12, 2010 | 1999 GMC Jimmy

1 Answer

Is there a fuse for lights on bumper on a 2005 chevy silverado crew cab that shine on rear license plate?


hi no there is no individual fuse for them they work in conjunction with your side lights if they do not work ( common problem with any vehicle ) 9 times out of 10 it will be the bulbs, or power wires going to them...hope this helped

Feb 23, 2010 | 2005 Chevrolet Silverado

1 Answer

My 94 f250 rear running lights don't work but the


Check the connecter fom the truck harness to the rear light harness for a corroded off wire.You will find it about two feet back of the bumper tucked in the frame rail and the easiest way to fix it is to jump around the bad wire useing a short piece of 16 guage wire and a couple of **** connecters[blue].

Dec 07, 2009 | 1994 Ford F250 Supercab

1 Answer

1994 corolla. minor accident pulled rear plastic


check for burnt fuse and wiring damage at bumber causing short condition!

Jun 22, 2009 | 1994 Toyota Corolla

1 Answer

2005 Chevy Impala Headlight


hi from uk for info the dip beams have a seperate fuse in fuse box for each side offside and nearside so if bulb is ok ? check fuses if you have h/book ? it will give location and amperage of fuse required also the same goes for the side/tail licence plate lights are on seperate fuses so you do not lose all lights if fuse goes

Jan 02, 2009 | 2005 Chevrolet Impala

Not finding what you are looking for?
2005 Chevrolet Impala Logo

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...