Question about 1995 Ford Taurus

1 Answer

How to change fuse for Ford Taurus headlamp? - 1995 Ford Taurus

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 76,132 Answers

The headlights are not fused, they use a circuit breaker which is part of the headlight switch.

Posted on Jul 14, 2009

  • 1 more comment 
  • vailx019 Jun 17, 2011

    How do I switch the circuit breaker?

  • robert white Sep 28, 2011

    i have the same prob

  • yadayada
    yadayada Sep 28, 2011

    The headlight switch is the circuit breaker, it is all one piece. Please explain what your headlights are doing, there are other problems with these switches that cause no headlights or ones that blink on and off. That is caused by a burnt connector at the headlight switch as well as the switch overheating due to a poor connection from the burnt connector.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 Ford Taurus won't start but the dash lights won't turn off what should I do


A1 CHECK FUSE 2 LOAD
  • Turn headlamp switch to PARK position.
  • Rotate panel dimmer switch fully up without turning on dome lamps.
  • Using a voltmeter, measure voltage at load side of fuse junction panel Fuse 2 (5A).
Is there battery positive voltage (B+)? Yes No TURN headlamp switch off. GO to A4 . GO to A2 .

May 15, 2016 | Ford Cars & Trucks

2 Answers

'02 Taurus SES Headlights and Hi Beams not working, Hi beams work w/ momentary lever pulled back


There is no relay for the headlamps on your Taurus . The lamps have constant B+ voltage , the fuses supply B+ right to the headlamps . The Voltage then travels to the dimmer an flash to pass switch on the steering column , then to the headlamp switch . When you turn on the headlamps the B+ voltage then goes to ground through the headlamp switch ! Pull the headlamp switch an test for B+ voltage on the red with yellow stripe wire . If you do your switch is bad . Go to www.bbbind.com/ for free wiring diagrams , then go to youtube an check out videos on headlamp not working trouble shooting ! From practical experience I'd say there is a problem with the headlamp switch , but don't guess test !

Jan 18, 2016 | 2002 Ford Taurus

1 Answer

No headlights working


Just low beams headlamp switch, bulbs, dimmer switch, low beam relay, fuses
just hi beams : dimmer switch, high beam relay, bulbs , fuse
Both Headlamp switch , dimmer switch, fuse, bulbs.

Nov 07, 2013 | 2001 Ford Taurus

2 Answers

Headlights and dashlights stopped working on my 1999 ford taurus


Check the fuses, usally right near the drivers dash area underneath. Some times fuses boxs are underhood too.

The cover of the fuse box usally tells what fuse is what.

P.S. make sure the key is off when checking fuses.!

Apr 15, 2011 | 1999 Ford Taurus

1 Answer

How to change a front turn light in a 1996 taurus.


Lamps, Parking Front Lamp-Lamp Assembly, Taurus
Removal and Installation
  1. Remove Headlamp (13008) as outlined.
Headlamp Assembly
Removal and Installation
  1. ani_caut.gif WARNING: THE REPLACEABLE HALOGEN HEADLAMP BULB CONTAINS GAS UNDER PRESSURE. THE HALOGEN HEADLAMP BULB MAY SHATTER IF THE GLASS ENVELOPE IS SCRATCHED OR THE HALOGEN HEADLAMP BULB IS DROPPED. HANDLE HALOGEN HEADLAMP BULB CAREFULLY. GRASP HALOGEN HEADLAMP BULB ONLY BY ITS PLASTIC BASE. AVOID TOUCHING GLASS ENVELOPE. KEEP HALOGEN HEADLAMP BULB OUT OF REACH OF CHILDREN.
    Position headlamp switch (11654) and headlamp time delay switch (13736) in the OFF position.
  1. Remove two bolts retaining headlamp (13008) to upper support assembly and loosen pinch bolt. Remove headlamp assembly from vehicle.
  1. Remove park lamp bulb and socket (Sable only) and headlamp bulb and socket from Headlamp Assembly as outlined.


    Headlamp Assembly (Taurus Shown, Sable Similar)


    k24744a.gif
  1. Turn lamp socket and wiring (13410) assembly 1/2 turn counterclockwise and remove from parking lamp (13200) housing.
  1. Remove screw from park/turn signal housing.
  1. Using 1/4 inch drive socket extension and swivel, insert tool through two access holes in upper radiator support. Remove screws from park/turn signal housing.
  1. Remove parking lamp from vehicle.
  1. To install, reverse Removal procedure.


    Front Lamp-Lamp Assembly, Taurus


    k23818a.gif

Nov 19, 2010 | Ford Taurus Cars & Trucks

1 Answer

Need instructions to change out 2001 ford taurus headlight switch


SECTION 417-01: Exterior Lighting 2001 Taurus/Sable Workshop Manual REMOVAL AND INSTALLATION Headlamp Switch Removal and Installation
  1. Disconnect the battery ground cable (14301). For additional information, refer to Section 414-01 .
  1. CAUTION: Cover the end of the tool with tape to prevent damage.
    Insert a thin tool to remove the headlamp switch.

  1. Disconnect the electrical connectors.
  1. To install, reverse the removal procedure.

Dec 24, 2009 | 2001 Ford Taurus

1 Answer

How do you remove the head lamp assembly on a 1993


1. Make sure headlamp is off and open hood.
2. Taurus model years 1990-1999: you must remove the whole headlamp to replace the bulb. Not a horrible task. Just annoying.
3. Facing the driver's side headlamp, and looking at the headlamp itself, at clock positions 8, 11 and 1 are the headlight housing screws. They all look the same. Using a 10mm socket wrench, remove these 3 screws and set them aside.
4. Just to the right of the "11 o'clock" housing screw is a bolt (same hexagonal 10mm sized top as the housing screws). This just needs a few turns to loosen it.
5. Gently pull the whole headlight forward. Now you can get at the bulb.
6. Disconnect the electrical connector from the bulb. Now the headlamp is free to work with. Remove the bulb, replace with a new bulb, make sure the bulb housing cylinder is in place and reconnect the electical.
7. Place headlamp back into position. Line up screw holes. Tighten the bolt. Replace housing screws and tighten.
8. Passenger side headlamp is mirror image of driver's side. Screws at 11, 1 and 4 o'clock positions. Bolt should be to the left of the "1 o'clock" housing screw.

Oct 12, 2009 | 1993 Ford Taurus

1 Answer

Headlights


The fuse panel is located below and to the left of the steering wheel by
the brake pedal. Remove the panel cover to access the fuses.
fuse #11 is right head lamps
fuse #12 is high beams
fuse #18 is parking lights
good luck
paul

Oct 02, 2008 | 2005 Ford Taurus

Not finding what you are looking for?
1995 Ford Taurus Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...