Question about 2000 Chrysler Grand Voyager

1 Answer

2000 chrysler voyager van

I need to know where the transaxle control module is located? i received a code of p0700 whcih states the ecm received a signal that the transaxle control module has a fault. could be a short or open circuit. please help

Posted by on

  • tonyaevatt Jul 14, 2009

    well, we really don't know. it seems to shift fine, drive good, we just seen the engine light come on and gave us 2 codes the po700 and the p0740. the po740 was some type of torque converter lock down code. where is the transaxle module located?

  • tonyaevatt Jul 14, 2009

    THANKS THIS IS VERY HELPFUL

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 453 Answers

2000 chrysler voyager van - c68b976.jpg
Since yours is a forward engine car. The transaxle must be located in the front.

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Code p0700 w a H02S on a chryslar sebring


year? engine? po700 usually has something to do with tranny

Jun 02, 2017 | Cars & Trucks

2 Answers

I have a 2009 Chevy Avalanche LS and I got the P0700 code, how easy is this to fix? where is the TCM located? If this is a dealer service how much?


DTC P0700: Transmission Control Module (TCM) Requested MIL Illumination
The transmission control module (TCM) uses the (GMLAN) to signal the engine control module (ECM) that the TCM is requesting malfunction indicator lamp (MIL) illumination. This happens when the TCM has determined that a failure affecting emissions has occurred in transmission control system. When the ECM receives the message from the TCM, DTC P0700 will set.
DTC P0700 can not be cleared from the ECM until the related TCM codes have been cleared.
This is something best left to a qualified repair shop , doesn't need to be the dealer ! AMMCO could fix it . This code is telling that other codes are stored in the transmission control module . Need a professional type or factory scan tool to check these . As to how much it will cost , no telling without knowing the codes in the TCM !

Apr 28, 2017 | Cars & Trucks

1 Answer

I have grand cherokee 2001 limited the code p0700 is apper the gear is started scend shift espically in morinig


possible causes
Shorted or open circuit within Transmission Control Module (TCM)
- Faulty Transmission Control Module (TCM)
symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Driveability problems
- Transmission shifting problems
p0700 description
The transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. When the TCM detects a malfunction with the control, a signal is send to the Engine Control Module (ECM) to trigger the Engine Light or Service Engine Soon light. The ECM stores the P0700 code and it means the TCM detected a malfunction with the transaxle controls.

Read more: http://engine-codes.com/p0700_jeep.html#ixzz2hihK6PVo

Oct 14, 2013 | 2001 Jeep Grand Cherokee

1 Answer

TROUBLE CODES 605 AND 700


Is this P0605 and P0700? If so read on.
P0605 - Control Module Fault
Possible causes- ECM/PCM Harness power supply circuit is open or shorted
- ECM/PCM Harness ground supply circuit is open or shorted
- ECM/PCM may be faulty
P0700 CHRYSLER - Transaxle Control System (TCM) Malfunction
Possible causes- Shorted or open circuit within transmission control module (TCM)
- Failure of transaxle control module
Tech notes Since the P0700 is just and informative code, check the TCM for more codes to resolve the problem

Sep 12, 2012 | 2001 Chrysler Concorde

1 Answer

Error code 0700 aa1 aa2


Hi there:
The DTC P0700 is a Information Code The Transaxle Control Module (TCM) that monitors the malfunction of sensors and actuators relating to transaxle control. If any malfunction is detected, the TCM informs the PCM by sending a signal (P0700 code). P0700 means that a code has been set in the TCM.
This code is for information ONLY. If this code is present, check for transaxle codes. So basically, the P0700 code is telling you to check the TCM for a transaxle DTC. The TCM can not turn on the check engine light so it has the PCM do it, which can only be done with a diagnostic scanner. The self retreival method for chryslers with the ignition key will not pull up the specific transmission fault codes in the TCM.


Hope this helps.

Mar 30, 2012 | 2001 Chrysler Town & Country

2 Answers

I have a 2011 dodge caliber and it isz throw a c0700 code could u tell me what this is


P0700 DODGE - Transaxle Control System Malfunction

Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- Driveability problems
- Transaxle shifting problems

Possible causes - Shorted or open circuit within transmission control module (TCM)
- Failure of transaxle control module

Tech notes Since the P0700 is just and informative code, check the TCM for more codes to resolve the problem.

P0700 DODGE Description The transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. When the TCM detects a malfunction with the control, a signal is send to the Engine Control Module (ECM) to trigger the Engine Light or Service Engine Soon light. The ECM stores the P0700 code and it means the TCM detected a malfunction with the transaxle controls.
CLEAR THE CODES AND SEE IF IT RESETS. MOST LIKELY NOT A PROBLEM

Sep 07, 2011 | 2002 Dodge Grand Caravan

1 Answer

What do i need to replace to fix error code p0700 on a 2002 dodge intrepid


(DTC) CODE # P0700....Transmission Control System (MIL Request) Translation: Transmission Control Module (TCM) Malfunction or Failure. P0700 Information Code The Transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. If any malfunction is detected, the TCM informs the PCM by sending a signal (P0700 code). P0700 means that a code has been set in the TCM. This code is for information ONLY. If this code is present, check for transaxle codes. So basically, the P0700 code is telling you to check the TCM for a transaxle DTC. The TCM can not turn on the check engine light so it has the PCM do it.

I hope this helps....let me know if I can assist further !!

Feb 21, 2011 | 2002 Dodge Intrepid

2 Answers

Error P0700. What is the cause? How to repair it?


P0700 JEEP - Transaxle Control System Malfunction
The transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. When the TCM detects a malfunction with the control, a signal is send to the Engine Control Module (ECM) to trigger the Engine Light or Service Engine Soon light. The ECM stores the P0700 code and it means the TCM detected a malfunction with the transaxle controls.

Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Driveability problems
- Transaxle shifting problems

Possible causes
- Shorted or open circuit within transmission control module (TCM)
- Failure of transaxle control module

Tech notes: Since the P0700 is just and informative code, check the TCM for more codes to resolve the problem. So you'll have to have the dealer or another qualified shop/technician pull the transaxle codes from the TCM and go from there.

Good luck (remember to rate this answer)

Jan 17, 2011 | 2004 Jeep Grand Cherokee

2 Answers

I have a cherokee sport that is running a few engine codes and i have a code scanner but no book to look the code up... mine are p1281,p0700,p1694


P1281 Engine Is Cold Too Long P1694 No CCD Messages Received From ECM
  • P0700 Transmission Control System Malfunction


    For the P0700 I would check your tps sensor first to make sure it is good. This is a common failure in this vehicle which can sometimes show as a transimission malfunction.


    Hope this helps, if you want alot more info about jeeps goto www.cherokeeforum.com

  • Dec 12, 2010 | 2000 Jeep Cherokee

    1 Answer

    I have a 2000 Chrysler Voyager. The engine light came on and the following troubleshooting code - PO700 and PO605. Can you tell me what these mean?


    The P0605 is an internal failure in the transmission controller. This code sets when the tcm fails one of its internal self tests, and i think the only repair is to replace the module. P0700 is transmission control system malfunction

    Nov 29, 2010 | 2000 Chrysler Grand Voyager

    Not finding what you are looking for?
    2000 Chrysler Grand Voyager Logo

    889 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chrysler Experts

    yadayada
    yadayada

    Level 3 Expert

    75807 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22133 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8172 Answers

    Are you a Chrysler Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...